AURA LIGHT I-053-B Exzite Airport Light Installation Guide
- September 5, 2024
- AURA LIGHT
Table of Contents
AURA LIGHT I-053-B Exzite Airport Light
INSTALLATION INSTRUCTION
Installation of ceiling mounts for wire
Attach the ceiling brackets with screws designed for the current ceiling. C/C
1100-1200 mm. Screw the wire brackets in the ceiling brackets.
Installation
Lift the luminaire and insert the wire on top of the wire lock. Adjust to the
proper height and cut off the excess wire (approx. 1 cm from the wire lock)The
luminaire connection cable can be attached to wire with cable ties.
Installation of whiteboard version
The luminaire should be placed as shown dimensions. X is dimension between the
floor and the upper of whiteboard.
Aura Light AB, Sweden Phone customer service +46 (0)20 32 30 30 info@auralight.com, www.auralight.com
Product Specifications
- Brand: Excite
- Model: I-053-B
- Installation: Pendant brackets
- Ceiling Mounts: C/C 1100-1200mm
- Manufacturer: Aura Light AB, Sweden
- Contact: Phone +46 (0)20 32 30 30, Email info@auralight.com
- Website: www.auralight.com
Product Usage Instructions
Mounting Pendant Brackets:
- Locate the pendant brackets included in the package.
- Mount the pendant brackets according to the provided instructions.
- Ensure the brackets are securely fixed for proper installation.
Installation of Ceiling Mounts for Wire
- Attach the ceiling brackets using screws suitable for the ceiling material with a center-to-center distance of 1100-1200mm.
- Screw the wire brackets into the ceiling brackets securely.
- Adjust and insert the wire on top of the wire lock on the luminaire.
- Cut off any excess wire, leaving approximately 1 cm from the wire lock.
- Secure the luminaire connection cable to the wire using cable ties.
Installation of Whiteboard Version:
- Follow the dimensions specified for placing the luminaire about the whiteboard.
- Ensure X distance between the floor and the upper edge of the whiteboard is 340mm.
- Install the luminaire accordingly for optimal performance.
Frequently Asked Questions (FAQ)
Q: How do I adjust the height of the luminaire during installation?
A: To adjust the height of the luminaire, lift it and insert the wire on
top of the wire lock. Cut off any excess wire after setting it to the desired
height.
Q: Can I use different screws for mounting the ceiling brackets?
A: It is recommended to use screws designed for the specific ceiling
material to ensure secure installation and stability.