AURA LIGHT PipeLED High-quality Pipe Luminaire Instruction Manual
- June 4, 2024
- AURA LIGHT
Table of Contents
AURA LIGHT PipeLED High-quality Pipe Luminaire
Installation Instructions
- Used for cable e, 0,75-1,5 mm2 (AWG 18#)
- Solid cable end
- Wire stripping 10-12 mm
Ceiling installation
**Step 1**
SPARE PARTS| QUANTITY|
---|---|---
PipeLED| 1| 1
Clips| 2| 2
Self-tapping screws| 2| 3
Rubber washers| 2| 4
Expansion plastic screws| 2| 5
**Step 2 **
Disconnect the power, then connect wires on the end caps.
Step 3
Install the suspension fixed bushings.
**Step 4**
Install PipeLED light and adjust beam angle.
Maintaince hints
Non-replaceable light source.
|
Replaceable control gear by a professional.
---|---
Aura Light AB, Sweden
Phone customer service +46 (0)20 32 30 30
info@auralight.com,
www.auralight.com
References
Read User Manual Online (PDF format)
Loading......