AURA LIGHT Sevede RE Premium Linear Luminaire Instruction Manual
- June 12, 2024
- AURA LIGHT
Table of Contents
AURA LIGHT Sevede RE Premium Linear Luminaire
Product Information
The Sevede RE is a lighting fixture manufactured by Aura Light AB in Sweden. It is designed for indoor use and comes in three different models: Sevede RE 600, Sevede RE 1200, and Sevede RE 625.
Specifications
- Sevede RE 600:
- Dimensions: 595mm x 574mm
- Cable entry: 80mm
- Sevede RE 1200:
- Dimensions: 1195mm x 1163mm
- Cable entry: 65mm
- Sevede RE 625:
- Dimensions: 620mm x 599mm
- Cable entry: 85mm
Product Usage Instructions
Please follow the instructions below for proper usage of the Sevede RE lighting fixture:
- For maintenance purposes, you may need to remove the inner profile. This should only be done when necessary.
- Ensure that the endcaps are not removed, as they are integral to the fixture’s orientation.
- Using a screwdriver, move the light trap located at both ends of the fixture (OP/MP).
- The cross-section visualization provided in step 5a, 5b, and 5c can help you understand the fixture’s internal components and their placement.
- There are two earth cables and a quick connector. These should be properly connected.
- After completing any maintenance, attach the inner profile back in place. Ensure that the optical sheet is secured and centered.
- Press and click the hinge to secure the inner profile.
- Reinstall the light trap at both ends (OP/MP).
Important Note: The light source contained within this luminaire should only be replaced by the manufacturer, his service agent, or a qualified person. Additionally, if the external flexible cable or cord of this luminaire is damaged, it should be replaced exclusively by the manufacturer, his service agent, or a qualified person to avoid any hazards.
For further assistance or inquiries, please contact Aura Light AB customer service at +46 (0)20 32 30 30 or email info@auralight.com. You can also visit their website at www.auralight.com.
- Date of manual/instructions: 2022-11-21
- Manual/instructions reference: I-196
Dimension
Featured
Installation
Note: The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Basic insulation between supply- and control-terminals (DALI). If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Aura Light AB, Sweden
- Phone customer service + 46 (0)20 32 30 30
- E-Mail : info@auralight.com,
- Web: www.auralight.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>