AURA LIGHT LED Opti T8 HF G3 LED T8 Retrofit Light Instruction Manual
- June 12, 2024
- AURA LIGHT
Table of Contents
AURA LIGHT LED Opti T8 HF G3 LED T8 Retrofit Light Instruction Manual
Specification
WARNING
- Parts List: LED T8 ECG Compatible Tube, Installation instructions
- Please read the installation instructions carefully and follow instructions to ensure safety
- The LED tube is only suitable with compatible HF-Ballast
- Only to apply in dry indoor usage and environments, outdoor applications requires IP ratxtures.
- LED lamps must be installed by a professional electrician.
- Once it is installed, do not change any components or structure of the LED lamp.
- This lamp is designed for general lighting service (excluding e.g. explosive athmospheres)
- Ambient temperature (Ta): -20°C to 50°C (-4°F to 122°F)
- This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In case of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted.
- No modifications of the luminaire which the LED lamp is to be used with are to be made.
- Lumen-values may differ depending on HF-driver
- A limited amount of drivers require a specific direction of the lamp to be installed, please test the product and confirm functionality before any larger installation
- Not suitable for use with dimmers
- The lamp is design to replace;
– 600 mm : T8 G13 18W
– 1200 mm : T8 G13 36W
– 1500 mm : T8 G13 58W
Installation Instructions
Aura Light AB, Box 8, 598 21 Vimmerby, Sweden, Phone + 46 (0) 20 32 30 30
info@auralight.com,
www.auralight.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>