PARKSIDE HG11082C Plant Irrigation Cones With Hose Instruction Manual

: September 5, 2024
: PARKSIDE

Table of Contents

PARKSIDE HG11082C Plant Irrigation Cones With Hose
Specifications
Product Usage Instructions
FAQ
Introduction
USE
Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PARKSIDE HG11082C Plant Irrigation Cones With Hose

Specifications

Product Name: Watering System
Material: Ceramic, Plastic
Recyclable: Yes
Country Availability: DE/AT/CH, GB/IE, FR/BE

Product Usage Instructions

Pull the green cap off (refer to fig. A).
Place the clay cone in water for 15 minutes (refer to fig. B).
Fill the hose with water to drain the air. Ensure the ceramic head reaches the bottom of the water container (refer to fig. F).
Fill the water into the clay cone and place the cap back. Use your thumb to seal the mouth of the hose on the green cap to prevent air from entering (refer to fig. D).
Insert the clay cone into the soil (refer to fig. E).
For large pots or plants, you may need 2 or more pieces of the cone (refer to fig. G1-G3).

FAQ

How do I dispose of the product?

Contact your local refuse disposal authority for guidance on disposing of the worn-out product. The packaging and accessories are recyclable.

What should I do if the water level is above the green cap?

Ensure that the water level in the container is below the green cap to prevent overflow.

Can I adjust the water amount in the cone?

Yes, raising or lowering the water container can help increase or decrease the water amount in the cone.

Do I need multiple clay cones for different plant sizes?

For large pots or plants, you may require 2 or more pieces of the cone.

Introduction

We congratulate you on the purchase of your new product. You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated eld of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

USE

Pull the green cap off (see fig.A).
Place the clay cone in water for 15 minutes (see fig. B).
Fill in hose with water from suction to drain the air from it. When air in the hose is completely discharged, you can see water come out of the other end of the hose (see fig. C).
Fill the water into clay cone, and place the cap back on the cone when placing the cap back, use your thumb to sear the mouth of the hose on the green cap, to prevent air goes into the hose. (see fig. D).
Insert clay cone into soil (see fig. E).
Immerse the suction into the water container. The ceramic head of suction must reach the bottom of the water container (see fig. F).

Note

Water level of in water container must be below the green cap.
Raising and lowering the water container can increase/decrease the amount of water in the cone.
You may need 2 pieces of cone or more for large pot or plants (see fig. G1- G3).

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.

The products incl. accessories, manuals, and packaging materials are recyclable and are subject to extended producer responsibility.
Dispose of them separately, following the illustrated Info-tri (sorting information), for better waste treatment.
The Triman logo is valid in France only.