HOLLYLAND Solidcom C1 Pro Wireless Stereo Headset User Manual
- September 6, 2024
- HOLLYLAND
Table of Contents
Solidcom C1 Pro Wireless Stereo Headset
Double-Ear Version
User Manual
V1.0
Product Interfaces
Operation Guide
Microphone Boom Indicator Description
-
Indicator light flashes: Unconnected (for remote headsets) *
-
Indicator light flashes quickly: Pairing (The indicator light color is subject to the current state during pairing.)
-
Indicator light stays ON: Master headset turned ON/Remote headset connected successfully
A. Steady green light: ENC OFF
B. Steady blue light: ENC ON
C. Steady red light: MUTE -
Red indicator light flashes twice: Low battery
Sound Description
“Low battery”: The device battery is low.
- The indicator light flashes when a remote headset is not connected, and it stays ON by default when the master headset is turned ON.
Operation Guide
Button/Switch Description
-
TALK/MUTE Button
1. Press the button to switch to the TALK mode, and press the button again to switch to the MUTE mode. In this case, the indicator light turns red.
2. Press and hold the button to switch to the TALK mode (PTT function), and then release the button to switch to the MUTE mode. -
ENC Switch
-
When the switch is pushed to the ENC position, yellow is displayed and ENC is enabled.
-
When the switch is pushed away from the ENC position, black is displayed and ENC is disabled.
Parameters
| Transmission Range | 1,100ft (350m) LOS |
|---|---|
| Frequency Band | 1.9 GHz (DECT) (varies by country and region) |
| Modulation Mode | GFSK |
| TX Power | 5 21dBm (125.9 mW) |
| RX Sensitivity | < -90dBm |
| Battery Capacity | 700mAh (2.66Wh) |
| Charging Time | About 2.5 hours |
| Frequency Response | ENC OFF: 150Hz-7kHz (fluctuation range: ±6dB) ENC ON: |
150Hz-7kHz (fluctuation range: ±10dB)
Signal-to-Noise Ratio| 71-±2dB@94dBSPL, 1kHz
Distortion| < 1%@94dBSPL. 150Hz-7kHz
Microphone Type| Electret
Input SPL| > 115dBSPL
Output SPL| 94±3dBSPL (@94dBSPL, 1 kHz)
ENC| 20d13±2 with two microphones (relative to environmental noise in all
directions)
Net Weight| About 250g(9oz) with batteries included
Temperature Range| 0°C to 45°C (working condition) -10°C to 60°C (storage
condition)
Note: The frequency band and TX power vary by country and region.
Safety Precautions
Do not place the product near or inside heating devices (including but not
limited to microwave ovens, induction cookers, electric ovens, electric
heaters, pressure cookers, water heaters, and gas stoves) to prevent the
battery from overheating and exploding.
Do not use non-original charging cases, cables, and batteries with the
product.
The use of non-original spare parts may cause electric shock, fire, explosion,
or other dangers.
Support
If you encounter any problems in using the product or need any help, please contact Hollyland Support Team via the following ways:
Hollyland User Group
HollylandTech
HollylandTech
HollylandTech
support@hollyland.com
www.hollyland.com
Statement
All copyrights belong to Shenzhen Hollyland Technology Co., Ltd.
Trademark Statement
Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no
organization or individual may copy or reproduce part or all of any written or
illustrative content and disseminate it in any form.
Note:
Due to product version upgrades or other reasons, this User Manual will be
updated from time to time. Unless otherwise agreed, this document is provided
as a guide for use only. All representations, information, and recommendations
in this document do not constitute warranties of any kind, express, or
implied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>