Televes EuroSwitch 5 QUAD inputs 8 outputs Owner’s Manual
- September 4, 2024
- Televes
Table of Contents
- Televes EuroSwitch 5 QUAD inputs 8 outputs Owner’s Manual
- Highlights
- Main features High shielding (A class) thanks to its manufacture in Zamak
- Installation into a family-house (1 satellite)
- Installation into a small multi dwelling unit (1 satellite)
- Installation into a small multi dwelling unit (1 satellite)
- ｔechnical specifications : Ref. 719403
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Televes EuroSwitch 5 QUAD inputs 8 outputs Owner’s Manual
EuroSwitch 5 QUAD inputs – 8 outputs
Compact and effective for large installations
Quad-compatible compact multiswitch equipped with 5 inputs (one terrestrial,
and the four polarities of one satellite) and 8 user outputs.
Thanks to its great compactness and its optimized electronic design, it
presents very low through and tap losses. This allows to reduce the number of
amplifiers needed in the cascade and to obtain a better balanced signal in the
users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple
switch. In addition, it incorporates a second switch that actives the TForce
technology, which automatically adjusts the terrestrial signal and keep it
constant despite variations in the reception.
RED compliant
Ref.| 719403|
---|---|---
Logical ref.| MSE58NCQ
EAN13| 8424450251218
Packing
| | |
Physical data
Box| 1 pcs.| | Net weight 362.00 g
Highlights
Very compact in dimensions and weight, even in models with high number of
users Very low through and tap losses
Great isolation between inputs and outputs
Equipped with the TForce technology, the terrestrial output level is
automatically adjusted (TERR. AMP. ACTIVE) to the optimal level
A 22 kHz tone can be generated, which makes it compatible with QUAD LNBs
10 dB Low Gain (LG) / High Gain (HG) switch for the attenuation of the
satellite input signal for each 8-user group
Several powering options: From the power supply, from the cascade through the
satellite inputs or outputs, or directly from the satellite receiver (RECEIVER
POWER ACTIVE)
100% european design, quality, and manufacturing
Main features High shielding (A class) thanks to its manufacture in Zamak
Versatile: selector switch to shift between cascade and terminal modes
Low consumption under normal conditions. In addition, ECO mode reduces
consumption as the number of connected users decreases
Wide 12-18V power supply range, making it compatible with most existing
systems Current circulation between all inputs and cascades
Input and output colour identification
Installation into a family-house (1 satellite)
The LNB and the multiswitch are powered from the user output by the STB,
turning on the “RECEIVER POWER” switch.
A PSU is not required.
Installation into a small multi dwelling unit (1 satellite)
The LNB, terrestrial antenna and the whole cascade of multiswitches is powered
by a single 3A PSU.
Thanks to “RECEIVER POWER” switched off, STBs are DC isolated from the cascade
and protected against overcurrent.
Installation into a small multi dwelling unit (1 satellite)
The LNB, terrestrial antenna and the whole cascade of multiswitches is powered
by a single 3A PSU.
Thanks to “RECEIVER POWER” switched off, STBs are DC isolated from the cascade
and protected against overcurrent.
ｔechnical specifications : Ref. 719403
| Number of inputs | 5 | |
|---|---|---|
| Number of cascadable outputs | 5 | |
| Number of user outputs | 8 | |
| Frequency range ｔERR. | MHz | 88 … 862 |
| Frequency range SAｔ. | MHz | 950 … 2400 |
| Input level ｔERR. | dBµV | 80 … 110 |
| Input level SAｔ. | dBµV | 65 … 112 |
| ｔhrough losses ｔERR. | dB | < 2 |
| ｔhrough losses SAｔ. | dB | < 2 |
| ｔap losses ｔERR. Active | dB | 0 … 4 |
| ｔap losses ｔERR. Passive | dB | 32 |
| ｔap losses SAｔ. HG | dB | 2 … 7 |
| ｔap losses SAｔ. LG | dB | 12 … 14 |
| Output level 10Ch DVB-ｔ | dBµV | 78 |
| Isolation H/V | dB | > 50 |
| Isolation users | dB | > 30 |
| Powering | Vdc | 12 … 18 |
| Max. current (PSU – ｔERR ACｔ.) | mA | 65 |
| Max. current (PSU – ｔERR PAS.) | mA | 5 |
| Max. current (SｔB) | mA | 85 |
| Operating temperature | ﾰC | -5 … 45 |
| Protection index | 20 |