NaxiShop IN-14-IN-8-2-Z573M-IN-8 Nixie Desktop Cloc User Manual
- June 6, 2024
- NaxiShop
Table of Contents
NixieShop.Com
IN-14/IN-8-2/Z573M/IN-8 Nixie Desktop Clock
Product manual
Version 1.17
2021
Thank you for purchasing a nixieshop.com clock!
Please read the following manual carefully to ensure you get the most out of
your Nixie Clock.
Unboxing
All nixieshop.com clocks are shipped as carefully as
possible to ensure safe delivery to you. In the unlikely event that the clock
does arrive damaged, or if you have any questions at all about using the
product, please contact me on
petro.vodopyan@gmail.com.
Carefully remove the clock from the box when unboxing this product. The clock
unit is protected with a plastic cover to secure tubes during shipping – the
nixie tubes are installed into sockets and should be handled with care.
WARNING: Please note that this clock is for indoor use only.
Contents
Each package contains the following items:
- Clock base with mounted Nixie tubes (tube types are specific to purchased model).
- 12v 1A power adapter with 5.5mm X 2.1mm jack.
- IR remote control.
- Built in motion sensor module(based on Doppler radar).
- Product manual.
Warranty
Nixieshop.com values your business and always attempts to provide you with the
very best quality of service. We provide a lifetime warranty for electronics
and a two-year warranty for tubes. The warranty applies only to the products
manufactured by Nixie Shop.
The warranty covers burned out tubes (up to three), problems with the
electronics of the clock. The warranty does not cover 12V external power
supply, damage of a product resulting from negligence; damage of a product
resulting from unauthorized modification of the product; damage caused by
natural disaster; theft or loss of the product.
Powering up
On the rear panel of the clock there is a power socket. Plugging in and turning on the power, the clock will perform a brief self-test to confirm it’s operational. The digits on the clock will scroll through from 0-9, then the clock will beep once.
Settings and Adjustments
There are two ways to adjust the various settings of the clock:
- The knob on the rear of the clock. Pressing it in once changes through the menu items, twisting it changes the values.
- Using the IR remote control. Pressing the “W” button changes through the menu items, pressing the white up/down button changes the values.
Find us on social networks
If you don’t mind, please take your time and leave a positive feedback for our
Trustpilot account here
https://www.trustpilot.com/review/nixieshop.com or visit our Facebook group
https://www.facebook.com/NixieShop. Your feedback is always appreciated and
welcome. Instagram: @nixie_shop_com
Facebook: https://www.facebook.com/NixieShop/
YouTube: https://www.youtube.com/channel/UCKl3p1LgoqoBTWXVx4CrpYQ/
Trustpilot: https://www.trustpilot.com/review/nixieshop.com
Menu
The menu items below are listed in the order that they will appear when going
through them.
LED RGB Values
The clock has one RGB LED under each nixie tube. All colors are adjustable and
can be set to a custom brightness.
-
Red color brightness (0 – 10 levels).
-
Green color brightness (0 – 10 levels).
-
Blue color brightness (0 – 10 levels).
Alarm Settings -
Alarm mode: 1 – enable; 0 – disable.
-
Alarm start hour.
-
Alarm start minute.
WARNING: The clock will make short beeping sound once it reaches a time. To stop the alarm rotate the knob.
General Settings -
Colon tube modes. 0 — blinks once a second (default), 1 — permanently ON, 2 — permanently OFF.
-
Beep once per hour, on the hour. (0 — disable (default); 1 — enable).
-
Slot machine frequency (1 – 5. Value is the interval in minutes. 0 – disable).
-
Spin changing numbers mode (0 — classic; 1 – scroll changing numbers; 2 — wave scrolling).
-
Animate RGB LED lights (0 — disable; 1 — enable).
Time/Date Settings -
12/24 hour mode. (0 — 24h mode (default); 1 — 12h mode).
-
Date display mode: 0 – DDMMYY; 1 – MMDDYY; 2 – YYMMDD.
-
Set hours.
-
Set minutes.
-
Set seconds.
-
Set month.
-
Set day.
-
Set year.
Sleep Settings -
Set sleep starting hour – the clock displays ZZ:XX: YY (where XX is the value of the sleep start hour).
-
Set sleep ending hour – the clock displays ZZ:XX: YY (where YY is the value of the sleep end hour).
-
Display date at the end of the period defined in set #10 (1 – enable; 0 – disable).
-
Timeout for motion sensor (options from 1-5) – sets delay time from ~1 minute and longer.
-
Activates built in motion sensor (for versions 1.14 and later). (0 — disable (default); 1 — enable).
Setting the clock to sleep when not required can help to prolong the life of the Nixie tubes. The sleep feature works using 24 hour time values. For best results, the clock should also be set into 24H mode (menu option 12). To disable sleep feature – set start value equal to end value.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>