SHARP PN-ME652 Optional Table Top Stand Instruction Manual
- May 15, 2024
- Sharp
Table of Contents
SHARP PN-ME652 Optional Table Top Stand
Product Specifications:
- Model: PN-ME652/PN-ME552/PN-ME502/PN-ME432
- Optional Table Top Stand: ST-43M (screws included), ST-65M (thumbscrews, screws, clamps, and stand holders included)
- Height Adjustment: PN-ME432/PN-ME502/PN-ME552
Product Usage Instructions
About Optional Table Top Stand:
For installation, follow the instructions included with the stand. Use only devices recommended by the manufacturer.
Mounting Information:
- The lines on the stand pole are indicators of the height adjustment. Adjust the pipe to the lines.
- Install the stand pole and pipe with included screws. Screw the two screw holes at the pipe.
FAQ
Q: What should I do if I don’t have the installation instructions for the optional tabletop stand?
A: If you do not have the installation instructions, please contact the manufacturer or your dealer to obtain a copy of the instructions before proceeding with the installation.
Q: Can I use any table top stand with this product?
A: It is recommended to use only the optional table top stands specified for this product to ensure proper fit and stability.
For SHARP dealers and service engineers
MultiSync®
MODEL: PN-ME652/PN-ME552/PN-ME502/PN-ME432
About Optional Table Top Stand
For installation, follow the instructions included with the stand. Use only those devices recommended by the manufacturer.
NOTE:
- PN-ME432, PN-ME502, and PN-ME552 use ST-43M. PN-ME652 use ST-65M.
- For the ST-43M, ONLY use screws which are included with the optional table top stand.
- For the ST-65M, ONLY use thumbscrews and attach the stand holders which are included with the optional table top stand. Install the stand so the long end of the feet face forward.
- The monitor can only be used in the landscape orientation with the tabletop stand.
MultiSync model name| Optional table top stand
---|---
PN-ME432 PN-ME502 PN-ME552|
ST-43M (screws are included)
PN-ME652| ST-65M (thumbscrews, screws, clamps, and stand holders are included)
Mounting Information
Height adjustment (PN-ME432/PN-ME502/PN-ME552)
- The lines on the stand pole are indicators of the height adjustment (Figure 1). Please adjust the pipe to the lines.
- Please install the stand pole and the pipe with included screws. Please screw the two screw holes at the pipe (Figure 2).