MAXIM LIGHTING 10330 Paramount 16 LED Flush Mount Instruction Manual

: September 4, 2024
: MAXIM LIGHTING

Table of Contents

MAXIM LIGHTING 10330 Paramount 16 LED Flush Mount
Before Getting Started
Lamp Care And Maintenance
PARTS
INSTALLATION INSTRUCTIONS
WIRING DIAGRAM
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAXIM LIGHTING 10330 Paramount 16 LED Flush Mount

Lamping: LED 19.4W ( Included)

Please consult a qualified electrician prior to install

Before Getting Started

LED LOW-VOLTAGE INSTRUCTIONS

Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
- Keep packaging materials away from children.

Lamp Care And Maintenance

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution: there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Check the product cord to be sure is free torn orfrayed.
WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
Periodically (every 90-180 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting andscorching, or even cause color to fade.

PARTS

Before getting,started, ensure the package contains the following components:

INSTALLATION INSTRUCTIONS

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

WIRING DIAGRAM

DIMMER COMPATIBILITY

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic ligh ng systems required

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

AC: 120-277V~50/60HZ

LED DRIVER DIAGRAM

SCHEMATIC FOR GENERAL REFERENCE ONLY.

VERIFIED LIST OF TESTED DIMMERS

Lutron Diva DVCL-153P
Lutron Diva DVELV-300P

GENERAL COMPATIBILITY

TRIAC / FORWARD PHASE
ELV / REVERSE PHASE

0-10V/ LOW VOLTAGE
Work at 120-277VAC

Due to inrush current, wattage should not exceeed 150W on a 600W dimmer

IMPORTANT!

If the control is not paired properly to LED fixtures, irreparable damage may occur.
If the dimmer you are using is not listed here, consult a lighting professional or view our
Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required

Made in China