MAXIM LIGHTING 57715 Wafer LED Surface Mount Owner’s Manual
- September 4, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 57715 Wafer LED Surface Mount
OWNER’S MANUAL
WAFER 0-10V | LED SURFACE MOUNT
57715 | 58711 | 58713 | 58715 | 58737 | 58780 | 58784
- Range Voltage Input 120-277V
- Die Cast Aluminum frame
- Edge Lit LED technology
- Energy Star and T24 Options
- Patented Driver WO2022166960A1 Installation on select models
- For Dimmer information: See Dimming Compatibility Chart
PRODUCT DESCRIPTION
Wafer was designed for the discriminate consumer who wants the low profile
look of recessed without the high cost.
Manufactured of die cast aluminum, Wafer brings ultimate heat dissipation to
its edge lit technology. Edge lighting gives very even light distribution
while dispersing heat over a larger area. The result of this is longer LED
life and better light diffusion.
*EMERGENCY BACK UP MODEL. MINIMUM 15 HOURS FOR FULL CHARGE. LASTS 1.5 HOURS ON BATTERY
FINISHES OPTIONS:
White (WT)
Satin Nickel (SN)
MATERIAL:
Aluminum
Polycarbonate Lens
AVAILABLE SIZES: *NOMINAL
5″ | 7” | 9” | 10″ |15”
RATINGS:
cETLus Wet Location
Energy Star 2.0
Title 24 JA8 Compliant
ADA extension
Dimmable
ADDITIONAL:
RATED LIFE: 50,000 Hours
OPERATING TEMP: -20º C (-4º), 40ºC
(104ºF) PHOTOMETRIC: Reports Available
Patented Technology:
WO2022166960A1 in 9″ and above
Always consult a qualified electrician before installing any lighting product
WESTERN DISTRIBUTION CENTER (HEADQUARTER)
253 NORTH VINELAND AVE I CITY OF INDUSTRY, CA 91746
EASTERN DISTRIBUTION CENTER
101 GARDNER PARK | PEACHTREE CITY, GA 30269
P. 626.956.4200 I F. 626.956.4225 I
maximlighting.com