GRAND MASTER Tarantula Torch 730 Grow Light Central Instruction Manual
- September 3, 2024
- Grand Master
Table of Contents
Tarantula Torch 730 Grow Light Central
“`html
Product Information:
The Tarantula Torch 730 is a powerful LED grow light designed
for indoor plant cultivation. It features Samsung LM301H EVO Mint
White LEDs along with LEDESTAR 2835/3535 LEDs powered by an
Inventronics LED driver. The light comes with knob dimming and RJ
port dimming capabilities, allowing for precise control over light
intensity. The folding design enables fast and easy installation,
and the product is backed by a 5-year warranty. With an IP66
waterproof rating, the Tarantula Torch 730 is suitable for various
growing environments.
Specifications:
-
Model Name: Tarantula Torch 730
-
Input Voltage: 120 Vac / 240 Vac / 277
Vac -
Max. Input Current: 6.3 Amps / 3.25 Amps / 2.8
Amps -
Power Factor: 0.99 / 0.95 / 0.95
-
Wattage: 745W / 730W / 730W (±5%)
-
Qty. of Light Bars: 8 Bars
-
LED Driver: Inventronics
-
LED Brand: Samsung LM301H EVO Mint White,
LEDESTAR 2835/3535 -
Dimming: Knob + RJ port, 10%~100%
DIM-TO-OFF -
IP Rate: IP66
-
Warranty: 5 Years
Product Usage Instructions:
Installation:
-
Unpack the Tarantula Torch 730 from the package.
-
Identify a suitable location for mounting the light
fixture. -
Ensure the mounting height is at least 12 inches above the
canopy of your plants. -
Connect the power cord to a compatible power outlet based on
the input voltage.
Operation:
-
Use the knob or RJ port dimming controls to adjust the light
intensity from 10% to 100%. -
The light can be dimmed to off using the dimming controls.
-
For advanced control, consider compatibility with Gavita Master
Controller EL2 and TrolMaster HCS-1 & LMA-14.
Safety Recommendations:
-
Avoid direct exposure to water or moisture during
operation. -
Ensure proper ventilation around the light fixture to prevent
overheating. -
Do not attempt to modify or tamper with the internal components
of the Tarantula Torch 730.
Frequently Asked Questions (FAQ):
Q: Can the Tarantula Torch 730 be used in outdoor
settings?
A: The Tarantula Torch 730 is designed for indoor use due to its
IP66 waterproof rating, which may not provide adequate protection
against outdoor elements.
Q: How long is the power cord of the Tarantula Torch 730?
A: The power cord length is approximately 10 feet (3.05 meters),
providing flexibility in positioning the light fixture.
“`
TARANTULA TORCH 730
5022589
IP 66
GRAND M ASTER LEDS
PO Box 423, Qualicum Beach, BC, V9K1S9, Canada www.grandmasterleds.com
TARANTULA TORCH 730
TARANTULA TORCH 730
Samsung LM301H EVO Mint White, LEDESTAR 2835/3535 INVENTRONICS LED driver Knob
dimming + RJ port dimming Folding design for fast and easy installation 5 year
warranty IP 66 Waterproof
Specifications
Model Name Input Voltage Max. Input Current
Power Factor Wattage +/- 5% Qty. of Light Bars
LED Driver LED Brand Dimming Dimming IP Rate Warranty
120 Vac 6.3 Amps
0.99 745W 8 Bars
Tarantula Torch 730 240 Vac
3.25 Amps 0.95 730W 8 Bars
277 Vac 2.8 Amps
0.95 730W 8 Bars
Inventronics Samsung LEDESTAR
Knob + RJ port 10%~100% DIM-TO-OFF
IP 66 5 Year
Surge Protection
6KV
LED Configuration LED life time
3000K+5000K+MW&660nm&730nm >100,000 hours
Power Cord Length
10′ (3.05M)
Max. Ambient Temp. Mounting Height
95 F (35 C) 12” ( Above Canopy )
Carton Size Weight Qty. / Ctn.
Package
117 x 65 x 14cm ( 46.1” x 25.6” x 5.5”) 14.3 kg ( 31.53 lbs) 1 Set
Details
Spectrum(SPD)
Plug
USA 120Vac (NEMA 5-15P) Standard
USA 240Vac (NEMA 6-15P) Optional
USA 277Vac (NEMA 7-15P) Optional
Knob Dimming + RJ Port dimming 10%~100% DIM-TO-OFF
Compatible with Gavita Master Controller EL2 and TrolMaster HCS-1 & LMA-14
Control Signal input and output
Dimension & Weight
Fixture Dimension: 1114mm X 1109mm X 92.5mm (43.86” X 43.66” X3.64”)
Fixture Net Weight: 11.85 kg ( 26.12 lbs) Including Driver box
Safety Warnings and Recommendations
Warning! Carefully read the warnings below before using or working with the
product! Always adhere to the local rules and regulations when installing or
using the LED fixture. Do not open or disassemble the LED fixture, it contains
no serviceable parts inside. Opening or modifying the LED fixture can be
dangerous and will void the warranty. Wearing protective gloves and glasses is
recommended during installation. Do not use the LED fixture when either the
LED fixture has been dropped or is damaged or its power cord is damaged.
Replace the power cord only with original certified cords. Keep the power cord
away from hot surfaces. Modifications to the cords can lead to unwanted
electromagnetic effects, which makes the product not comply with legal
requirements. Do not plug the LED fixture into a supply voltage other than
what is instructed on the fixture. Always disconnect the LED fixture from
mains before performing any maintenance. The LED lighting product is extremely
bright. Do not stare directly into any of the lights. The LED fixture will get
hot during operation. Do not touch when the light is on. Keep the LED fixture
away from children. Always allow for a cool down period of at least 30 min.
before touching the LED rails. Touching the LED rails when the fixture is lit
or immediately afterwards can result in severe burns! Do not expose the LED
fixture to: (ambient) temperatures outside the specified range; dust and
contamination; direct sunlight during use or HID light that could heat up the
ballast. Do not use the LED fixture near flammable, explosive or reactive
substances. Do not use sulfur vaporizers or water misters. The installation
and use of the LED fixture are the responsibility of the end user. Incorrect
use or installation can lead to failure and damage to the LED fixture. Damage
to the LED fixture and electronic circuitry because of incorrect installation
and use will void the warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>