Grand Master Master 4 Veg LED Light User Manual
- June 16, 2024
- Grand Master
Table of Contents
- ADC523AN 52 Inch White Indoor Ceiling Fan with Remote
- MASTER 4V
- Specifications
- Details
- Spectrum(SPD)
- Knob Dimming + RJ Port dimming 10%~100% DIM-TO-OFF
- Control Signal input and output
- Dimension & Weight
- Safety Warnings and Recommendations
- Installation Instruction
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MASTER 4V
GML SOLUTIONS LTD.
PO Box 423, Qualicum Beach, BC, V9K1S9, Canada
www.grandmasterleds.com
ADC523AN 52 Inch White Indoor Ceiling Fan with Remote
MASTER 4V
- 1,368 x Samsung LM301H
- INVENTRONICS LED driver
- Knob dimming + RJ port dimming
- Folding design for fast and easy installation
- 5 year warranty
- IP 66 Waterproof
Specifications
Model Name | Master 4V |
---|---|
Input Voltage +/- 10% | 120 Volts |
Max. Input Current | 4.13 Amps |
Power Factor | 0.99 |
Wattage +/- 5% | 490W |
Qty. of Light Bars | 4 Bars |
LED Driver | Inventronics |
--- | --- |
LED Brand | SAMSUNG |
Dimming | Knob + RJ port |
Dimming | 10%~100% DIM-TO-OFF |
IP Rate | IP 66 |
Warranty | 5 Year |
Surge Protection | 6KV |
LED Configuration | 5000K |
LED life time | >100,000 hours |
Power Cord Length | 10′ (3.05M) |
Max. Ambient Temp. | 95 F (35 C) |
Mounting Height | 18’’~24 ( Above Canopy )’’ |
Package
Carton Size | 118 x 64x 14cm ( 46.5’’ x 25.2’’ x 5.5’’) |
---|---|
Weight | 14.5 kg ( 31.97 lbs) |
Qty. / Ctn. | 1 Set |
Details
Spectrum(SPD)
Plug
Knob Dimming + RJ Port dimming 10%~100% DIM-TO-OFF
Compatible with Gavita Master Controller EL2 and TrolMaster HCS-1 & LMA-14
Control Signal input and output
Controller (RJ14 6P4C)
| PIN 1| PIN 2| PIN 3| PIN 4| PIN 5| PIN 6|
| N/A| Dim +| Dim –| Dim –| Dim +| N/A|
Fixture (INPUT) Side (RJ14 6P4C)
| PIN 1| PIN 2| PIN 3| PIN 4| PIN 5| PIN 6|
| N/A| Dim +| Dim –| Dim –| Dim +| N/A|
Fixture (OUTPUT) Side (RJ14 6P4C)
| PIN 1| PIN 2| PIN 3| PIN 4| PIN 5| PIN 6|
| N/A| Dim +| Dim –| Dim –| Dim +| N/A|
Dimension & Weight
Fixture Dimension:
1114mm X 1114mm X 103mm
(43.86’’ X 43.86’’ X4.06’’)
Fixture Net Weight:
11.75 kg ( 25.9 lbs) Including Driver box
Safety Warnings and Recommendations
Warning! Carefully read the warnings below before using or working with
the product!
Always adhere to the local rules and regulations when installing or using the
LED fixture.
Do not open or disassemble the LED fixture, it contains no serviceable parts
inside. Opening or modifying the LED fixture can be dangerous and will void
the warranty.
Wearing protective gloves and glasses is recommended during installation.
Do not use the LED fixture when either the LED fixture has been dropped or is
damaged or its power cord is damaged.
Replace the power cord only with original certified cords. Keep the power cord
away from hot surfaces.
Modifications to the cords can lead to unwanted electromagnetic effects, which
makes the product not comply with legal requirements.
Do not plug the LED fixture into a supply voltage other than what is
instructed on the fixture.
Always disconnect the LED fixture from mains before performing any
maintenance.
The LED lighting product is extremely bright. Do not stare directly into any
of the lights.
The LED fixture will get hot during operation. Do not touch when the light is
on. Keep the LED fixture away from children.
Always allow for a cool down period of at least 30 min. before touching the
LED rails. Touching the LED rails when the fixture is lit or immediately
afterwards can result in severe burns!
Do not expose the LED fixture to: (ambient) temperatures outside the specified
range; dust and contamination;
direct sunlight during use or HID light that could heat up the ballast.
Do not use the LED fixture near flammable, explosive or reactive substances.
Do not use sulfur vaporizers or water misters.
The installation and use of the LED fixture are the responsibility of the end
user. Incorrect use or installation can lead to failure and damage to the LED
fixture. Damage to the LED fixture and electronic circuitry because of
incorrect installation and use will void the warranty.
Installation Instruction
Unfold the LED fixture.
Take out the accessories from bags. Connect carabiner hooks with steel
ropes. Connect carabiner hooks with handles on fixture rails. Hook steel ropes
with ratchet hangers. Place the LED driver box onto the LED fixture. Fix the
LED driver box with the knob SCrews. Push the male connector with DC cable
(linked with the luminaire) into the female connector (mounted on the
driverbox). Follow the correct direction to connect the AC power cord with
driver box. Push the AC power plug into wall outlet.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>