SSV WORKS MAVR-US10U Underseat Subwoofer Enclosure Installation Guide
- September 3, 2024
- SSV WORKS
Table of Contents
SSV WORKS MAVR-US10U Underseat Subwoofer Enclosure
WARRANTY INFORMATION
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against defects in material or workmanship. Labor for replacement of defective components is not covered. Contact SSV Works for further warranty information.
Please read and understand these instructions completely before installation to avoid possible injury, or damage to the accessory or vehicle.
PARTS LIST IMAGES
- Maverick R Subwoofer Enclosure, Driver or Passenger side
- Bracket Pack [B-MBP3375]
- M6x12 Hex Head Screw and Washer Hardware Pack [B-HPM612HHW14-4]
- M6x16 Hex Head Screw and Washer Hardware Pack [B-HPM616HH-2]
TOOLS NEEDED FOR INSTALLATION
- A. The MAVR subwoofer enclosure can be mounted under either the driver or passenger side seat.
- an 18mm socket wrench to remove the right shoulder seat belt retractor mechanism. Otherwise, skip to step D.
- Unplug the seatbelt chime connector.
- Separate the lap portion of the 4-point belt with the main harness.
- E. Remove the (2) 13mm bolt and nut on the front seat rail.
- F. Slide the seat forward and remove the rear 18mm seat rail nuts.
- G. Carefully remove the seat.
- H. Apply the foam pad (included in the kit) to the flat portion of the bottom reinforcement tube.
- I. Mount the brackets on the Mav R subwoofer enclosure using (4) M6x12mm hex head bolts and washers.
- J. Slide the Mav R subwoofer enclosure under the front seat rail mounts and insert the brackets to the rear seat rail studs.
- K. Align the front screw holes and use (2) M6x16mm hex head bolts and washer to secure the enlcosure.
- L. Reverse the disassembly procedure to complete the installation.
MAVERICK R UNDERSEAT SUBWOOFER WIRING DIAGRAM
| Description | Part # | |
|---|---|---|
| 1 | Amplifier (not included) | |
| 2 | Maverick R Underseat Subwoofer Enclosure | MAVR-US10U |
| Detail | Description | |
| --- | --- | |
| A | Connect MAVR-US10U to the amplifier |
- SSVWORKS.COM
- 1-818-991-1778 EXT 2
- SUPPORT@SSVWORKS.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>