MAXIM LIGHTING 10332 Paramount 21 LED Flush Mount Installation Guide

MAXIM LIGHTING 10332 Paramount 21 LED Flush Mount

Product Specifications

• Item/Model Number: 10332 Paramount 21 LED Flush Mount
• Lamping | Ampoule: LED 32W (Included)

Product Usage Instructions

1. Initial Setup:
   • Read the instructions carefully before assembly.
   • Handle the package with care to avoid damaging components.
   • Remove all packaging materials and keep them for future use.
   • Keep hardware parts and packaging away from children.
   • Choose a clean, level assembly area away from hard surfaces.
   • Ensure you have all necessary contents for assembly.
2. Assembly:
   • Assemble the product close to the installation location.
   • Avoid over-tightening screws and bolts to prevent damage.
   • Do not allow children to play with the product.
3. Cleaning and Maintenance:
   • Disconnect from power before cleaning or assembly.
   • Allow the bulb to cool before replacing or cleaning.
   • Use appropriate cleaners for different surfaces.
   • Clean with a cloth and mild detergent, avoiding abrasive cleaners.
   • Check and tighten screws every 90-180 days.

Frequently Asked Questions

• Q: Can children play with the product?
  • A: No, children should not play with the product for safety reasons.
• Q: How often should screws be tightened?
  • A: Periodically check and tighten screws every 90-180 days to ensure stability.
• Q: What type of cleansers should be used for different surfaces?
  • A: Use glass cleaner, stone polish, and wood polish for respective shade surfaces.

Please consult a qualified electrician prior to install

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to install it.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!

• Keep packaging materials away from children.

Care And Maintenance

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution: there is a risk of shock!
• Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.
• WARNING: Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started, ensure the package contains the following components:

INSTALLATION INSTRUCTIONS

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

WIRING DIAGRAM

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.

AC: 120-277V~50/60HZ

FACTORY CONNECTIONS

• (+) INNER CONUCTOR | OUTER MESH (-)

LED DRIVER DIAGRAM

SCHEMATIC
FOR GENERAL REFERENCE ONLY

MORE INFORMATION

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P

GENERAL COMPATIBILITY

TRIAC / FORWARD PHASE ELV / REVERSE PHASE

• 0-10V/ LOW VOLTAGE
• Work at 120-277VAC

Due to inrush current, wattage should not exceeed 150W on a 600W dimmer

IMPORTANT!

• If the control is not paired properly to LED fixtures, irreparable damage may occur.
• If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional
CRITICAL KNOWLEDGE of electronic lighting systems required

© 2024 MAXIM LIGHTING

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>