Metra Reliable Electronic Motor Lock User Guide
- September 3, 2024
- Metra
Table of Contents
Metra Reliable Electronic Motor Lock
Product Information
Specifications
- Product: Smarter Locking System
- Material: Metal strike wire, plastic strike body
- Recommended Door Thickness: Varies
- Screw Size: Between 3mm and 5mm
Product Usage Instructions
Installation Recommendation
- For optimal performance, follow the recommended installation steps provided below:
Smarter Locking
The smarter locking feature ensures enhanced security and convenience in your daily use.
Follow these steps to mount the strike on your door:
- STEP 1: Attach the metal strike wire to the plastic strike body and press until it jams into the holder.
- STEP 2: Insert the screws with washers into the holder. They will be held in place by a plastic wedge.
Ensure that you use screws between 3mm and 5mm in size. We recommend one of the following head types for best results.
For complete installation information, please refer to the provided link.
Please note that the content of this document is subject to change without notice.
FAQ
- Q: Can this product be used on all types of doors?
- A: The product is designed to be compatible with various door thicknesses and materials. However, it is recommended to follow the manufacturer’s guidelines for optimal performance.
- Q: What should I do if the screws provided do not fit my door?
- A: In such cases, you can choose screws between 3mm and 5mm in size that are suitable for your door. Ensure they are securely fastened for proper installation.
Installation Instructions
Mounting the strike on the door
- Screw type depends on the material of the door
- Always use supplied washers
Due to the use of different door thicknesses and materials, the manufacturer has decided to leave the choice of screws to the installer. While installing, we recommend the showed assembly procedure of the strike.
STEP 1
- Attach metal strike wire to the plastic strike body and press until it jams into the holder.
STEP 2
- Insert the screws with washers into the holder. There they will be held by a plastic wedge.
Use screws betweenØ = 3 andØ = 5 mm, We recommend one of these head types:
For complete Installation Information follow the link.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>