COSTWAY MU70008 61 Key Electronic Keyboard Piano User Manual

COSTWAY MU70008 61 Key Electronic Keyboard Piano

Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped ASAP!

Before You Start
Please read all instructions carefully and keep it for future reference.
Attention: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years.

General Warnings:

• The product must be installed and used under the supervision of an adult.
• Read through each step carefully and follow the proper order.
• Remove all packaging, separate and count all parts and hardware.
• Please ensure that all parts are correctly installed, incorrect installation can lead to danger. & We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface.

Precautions

Read it carefully before proceeding.

• only apply t.h e designated power supply adaptor. Change ii whenever ii shows any wear and tear, or e Neither disassemble the instrument nor make any change inside of ii. In case of any anomalous
• Muankceti osunr, es ttohpa tu tshien gb iomthm aerdei aptoewlye arendd ohfaf vwe hite rne pcaoinrende cbtyin tgh eth qeu ianlsiftireudm menatin wteitnha ontchee rp aemrspolnifnieerls. .
• Don’t leave the volume working in maximum or in an uncomfortable stage for long time.
• Keep the instrument away from the heat, which may result in damage of the components.
• Stop any liquid id, or other particles getting into the instrument, which may corrode the body or result in • Unplug the instrument before cleaning it and avoid using wet hands to plug or unplug it.
• Clean the instrument with a piece of dry and soft cloth without paint, alcohol or other chemical solvents.
• Turn off and unplug the instrument after a performance or for a long time of leaving it unused.
• Warning! Do not get it close to the ear! Misuse may cause damage to hearing.
• The supply terminals are not to be short-circuited.
• The packing has to be kept since it contains important information.
• Tsoh arelld nuocte b teh ee rxipsko soef dfir teo o drr eiplepcintrgic o srh sopclka, sdhoi nngo ta enxdp othsae tt hnios aopbpjaercattsu fsi ltloe rda iwn iothr m lioqiusitdusre, . such app shall be placed on the apparatus. e Maximum Operating Temperature:40’C
• The direct plug-in adaptor is used as a disconnect device, the disconnect device shall remain readily operable.
• Do not install this equipment in a confined space such as a bookcase or similar unit, and remain a well

Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Caution: type. The danger of explosion if the battery is incorrectly replaced.Replace only with the same or equivalent
Warning: Excessive sound pressure from earphones and headphones can cause hearing loss.

Package Contents

• 61-Key Electric Keyboard Piano with LCD Display X 1 pc
• Keyboard Stand X 1 pc
• Stool X 1 pc
• Power Adaptor X 1 pc
• Headphone X 1 pc
• Microphone X 1 pc
• Music Stand X 1 pc
• Installation Manual X 1 pc

Panel Control and External Ports

Top panel control

1. Loudspeaker

2. Power

3. Fingered chord

4. Single chord

5. Record

6. Start/Stop

7. Program

8. Sync

9. Play

10. Fill-in

11. Keyboard Percussion

12. Sustain

13. Vibrato

14. LCD screen

15. One-Key

16. Follow

17. Ensemble

18. Timbre

19. Rhythm

20. Demo Song

21. Numbers

22. Master Volume

23. Aecom volume

24. Tempo

25. Percussions

26. Chord Zone
    External ports on the rear panel

27. AUDIO INPUT

28. MIC

29. PHONES/OUTPUT @DC9V

Performance Preparation

Battery mounting
6 AA batteries can be used as the power supply for this keyboard. Open the cover of the battery jar at the bottom of the keyboard, check whether the positive and negative electrodes of the battery conform to the indications, mount the batteries one by one, and then cover the battery jar. * Low voltage due to long time use will cause low volume or timbre distortion. In this case, replace the battery immediately so as not to impact the performance effect. If the keyboard will be left idle for a long time, please remove the batteries, so as to protect the keyboard components from damage due to battery damp.

AC/DC Power adaptor
A dedicated AC/DC power adapter shall be used. Connect the output end of the adaptor to the power port on the rear panel of the keyboard, and then the other end to the power socket.

• (Note: the input voltage to the adaptor shall be compatible with the power supply voltage)

Audio Output/ External Headphone

• Audio output: firstly, power off the keyboard and the external audio devices, secondly, connect one end of the audio cable to the PHONES/OUTPUT port on the rear panel of the keyboard, and then connect the other end to the audio input port of the audio devices.
• Headphone connection: When connecting a headphone to the PHONES/OUTPUT port on the rear panel of the keyboard, the loudspeaker will be disenabled automatically. In this way,  u can perform without disturbing others.
• Caution! When using headphones, maintain at an appropriate volume to protect your hearing.
• Mic Input and Audio Input
• Mic input: connect a microphone to the MIC port to sing while playing the keyboard.
• The Keyboard is equipped with a stereo input function. Sound signals from mobile phones,

MP3 players, computers and other audio devices can be input into the keyboard system for playing. Firstly turn off the Keyboard, then, connect one end of audio cable to the output port of an audio device, and the other end to the AUDIO INPUT port on the rear panel of the Keyboard, finally, power on the keyboard.

Basic Performance Method

When [Power ON/OFF] is pressed, LCD screen will turn on and show the current tone, tempo, and another status. Then you may operate the Keyboard as required.

• Master volume adjustment
  Press [Master Vol +] or [Master Vol-] to turn up or turn down the master volume. Press [Master Vol +] and [Master Vol-] simultaneously to reset to the default value of “1 O”
  By controlling the master volume the accomp volume can be controlled.

• Acomp volume adjustment
  Press [Acco mp Vol +] or [Accomp Vol-] to turn up or turn down the accomp volume. Press the
  [Accomp Vol +] and [Acco mp Vol-] simultaneously to reset to the default value of”1 O”.

• Tone selection
  The Keyboard provides 255 tones, from “000” to “254”, for your selection. When the keyboard is powered on, the Tone Selection function will be enabled automatically, and “TONE” will show on the screen. In the absence of screen, press [Timbre] to enable the tone selection function. The Tone is defaulted to be “000”, and it can be adjusted by pressing the corresponding number buttons or pressing the”+” /”-“button.

• Playing Percussion
  This Keyboard provides 8 kinds of panel percussions. Press “Percussion” to play the corresponding percussion. Percussion instruments can be added to enhance the atmosphere as required.
  This Keyboard provides 61 kinds of keyboard percussions. Press [Percussion] to turn the keyboard into a percussion keyboard, and each key corresponds to one percussion instrument. Press this button again to disenable the keyboard percussion function.

• Playing demonstration songs
  This Keyboard has stored 24 demo songs, from “000” to “023”, for your selection. Press [Demo Song], “SONG” will show on the screen, and demonstration songs will play in order. During the playing process, press [Demo Song] to play the next demonstration song, and press [Start/Stop] to stop playing. During the playing process, you can press the number buttons or the”+”/”-” buttons to select another demonstration song, and the selected demonstration song will play repeatedly.

Auto Rhythm

• Rhythm selection
  This Keyboard provides 255 rhythms, from “000” to “254”, for your selection, and the rhythm is defaulted to be “000”. Press [Rhythm], “RHYM” will show on the screen. Then press the number buttons or the”+”/”-” buttons to select other rhythms.

• Rhythm control

1. Rhythm enabling
  * Press [start/stop] to start accomp rhythm.
  * under the enable state, Press [Sync], and “SYN” will show on the screen. Then play any key in the chord key zone (the 1st-19th key, from left), the accomp rhythm will be activated.
2. Interlude  

After the accomp rhythm is activated, press [Fill-in] to have a temporary rhythm play during the accomp rhythm.

3. Stop rhythm

• During the accomp rhythm, press [Start/Stop] to stop the accomp rhythm.
• Tempo adjustment
  It tempo is defaulted to be 120 tempo/min, press [Tempo +] or [Tempo-] to increase or decrease the tempo speed. Press the two buttons simultaneously may reset to the default value of 120 tempo/min.

Auto Bass Chord

Single Chord Fingering

Fingered Chord Fingering (C Key)
(The C key fingered chord fingering is as shown in the following figure, and the rest can be obtained by analogy)

Under the state that the rhythm is activated, press [Single Chord]. After the “SIN” is showed on the screen, you can play a single chord on the keys in the chord zone of the keyboard.
Press [Single) again, “SIN” will disappear from the screen, and the single chord function will be disenabled.

• Fingered chord
  Under the state that the rhythm is activated, press [Fingered). After the “FIN” is showed on the screen, you can play a figured chord on the keys in the chord zone of the keyboard.
  Press [Fingered Chord) again, “FIN” will disappear from the screen, and the fingered chord function will be disenabled.

Effect Control

• sustain function
  Press [Sustain), “SUS” will show on the screen, and the sustain effect will be activated. Press this button again, “SUS” will disappear from the screen, and the sustain effect will be disenabled.

• vibrato function
  Press the [Vibrato) button, “VIB” will show on the screen, and the sustain effect will be activated. Press this button again, “VIB” will disappear from the screen, and the sustain effect will be disenabled.

Recording and Rhythm Programming

• Recording
  Press [Record) to enable the recording function, “REC” will show on the screen. Under this mode, all playing notes will be recorded. When the storage is full, “REC” will flash on the screen, and the recording will stop automatically.

  • Press [Play) to playback, the recorded notes, and “PLAY” will show on the screen. On completion of playback, “REC” will show on the screen. You can record a new rhythm, or you can press [Play] to playback the recorded rhythm.
  • Press [Start/Stop] or press [Record) again to disenable the recording function, and all recorded rhythms will be removed.

• Rhythm programming
  Press [Program) to enable the rhythm programming function, “PRG” will show on the screen, and the keyboard percussion will be activated. Under this mode, you can create custom rhythms by playing the corresponding percussion key.

  •  percussions can be recorded at maximum, after that “PRG” will flash on the screen, and programming will stop automatically.
  • Press [Play) to playback the programming rhythm.
  • Press [Start/Stop] or press [Program] again to disenable the programing function and all recorded rhythm will be removed.

Three-step Intelligent Training

• The training I: one key
  Press [One Key] to enable the single key training function, “LEARN”, “SONG” and the song number will show on the screen, and then press”+”/”-” button to select the song to be learned. One key training aims at duration learning, and there is no requirement on pitch or creativeness. This mode allows for mistakes when playing the keys, but the keyboard still plays correct notes, and the screen will show the correct notes.
  After one song is finished, repeat the current song to be learned.
  Press [Start/Stop] or press the [Single Key) button to disenable the training function.

• Training II: Follow
  Press [Follow) to enable the following function, “LEARN”, “SONG” and the song number will show on the screen, and then press”+”/”-” button to select the song to be learned.
  With [Follow] training, you can learn by following the correctly playing notes. You can also learn by following the notes show on the screen, it will wait for you to play the correct note before it moves to the next one.
  Notes: Under this state, the Keyboard plays only the correct notes, and gives no response to the wrong notes.
  Press [Start/Stop] or press [Follow) to disenable the training function.

• Training Ill: Ensemble
  Press [Ensemble] to enable the ensemble function, “LEARN”, “SONG” and the song number will show on the screen, and then press”+”/”-” button to select the song to be learned.
  The Ensemble training aims at the correct and comprehensive learning of the song duration and notes. The keynote will be shielded for ensemble, and you need to play the correct note according to the correct duration of the song. If you fail to play within 3 seconds, the keyboard will automatically play the correct note.
  After one song is finished, repeat the current song to be learned. Press the [Start/Stop] button or press [Ensemble] to disenable the training function.

Appendix Timbre Table

Appendix Rhythm Table

Assembly Instruction of Keyboard Stand

ATTENTION :ADULT ASSEMBLY REQUIRED H TYPE STAND

Find Section (D) & (E).Align the holes on the base of (D) to the holes on (E).Use nut (I) and bolt (H) to connect the two sections. Use correct tools to ensure a firm attachment. Repeat this process for the other side section .

Attach Section (B) to (D) and{C) using the appropriate screw (F). Repeat this process for the other side section.

Fastening screws (F) for adjusting to the suitable height of keyboard legs.
Find Section (D) & (E).Align the holes on the base of (D) to the holes on (E). Use nut (I) and bolt (H) to connect the two sections. Use correct tools to ensure a firm attachment. Repeat this process for the other side section.

Attach two section (B) to section (A) using four (F) screws to create the upper section. Fastening screws(G)for fixing keyboard on stand.

Welcome to visit our website and purchase our quality products!
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich

E-mail

• US: cs.us@costway.com
• UK: cs.uk@costway.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>