ForaCare Soothe Neb NBL300g Compressor Nebulizer Installation Guide
- June 12, 2024
- ForaCare
Table of Contents
ForaCare Soothe Neb NBL300g Compressor Nebulizer
Product Information
- Product Name: NBL300 Series Compressor Nebulizer
- Model Number: 541-7015000-001
- Version: 1.0
- Release Date: 2023/06
- Distributed by: ForaCare, Inc.
- Address: 893 Patriot Drive Suite D, Moorpark, CA 93021, USA
- Country of Manufacture: Taiwan
- Contact Information: Toll Free – 1-888-307-8188 (6:30 am-5:30 pm PST, Mon.-Fri.)
- Website: www.foracare.com
Product Usage Instructions
- Turn off the main unit by following the instructions provided in the manual.
- Pull out the nebulizer kit from the main unit.
- Turn the nebulizer cap counterclockwise to remove it from the medicine cup.
- Rinse the mouthpiece, medicine cup, spray nozzle, and cap thoroughly with running water for at least 10 seconds. Pay special attention to flushing the opening of the spray nozzle to clean out any residue.
- If the spray nozzle, mouthpiece, cap, and medicine cup are still severely obstructed or dirty, immerse them in water for at least 15 minutes. Then, rinse them again with running water for at least 10 seconds as described in step 4.
- Never attempt to clean the clog in the gap with sharp objects. If the spray nozzle, mouthpiece, cap, and medicine cup cannot be cleaned, replace them with new ones.
- Shake off excess water from the cleaned parts and let them air dry.
- Use a clean cloth to wipe the mask, air hose, and the outer casing of the main unit.
- Never immerse the mask, air hose, and the main unit in water.
Please follow the cleaning instructions to clean your device after each use.
INSTALLATION INSTRUCTION
-
Turn off the main unit.
-
Pull out the nebulizer kit from the main unit.
-
Pull out the mouthpiece/mask from the nebulizer kit.
-
Turn counterclockwise.
-
Depart the cap with spray nozzle from the medicine cup.
-
Detach the spray nozzle from the cap.
-
Rinse the mouthpiece, medicine cup, spray nozzle and cap thoroughly with running water at least 10 seconds. Especially for the spray nozzle, make sure to flush the opening (as the arrow indicates) to clean out the residue.
-
If the spray nozzle, mouthpiece, cap and medicine cup are still in severe obstruction or dirty, immerse them in water for at least 15 minutes first, and then rinse them with running water for at least 10 seconds again ( as in 7 ).
WARNING NEVER clean out the clog in the gap with sharp objects. *Once the spray nozzle, mouthpiece, cap and medicine cup are severely clogged and cannot be cleaned, replace them with new ones. -
Shake off excess water and let them air dry.
-
Wipe the mask, air hose, and the outer casing of the main unit with a clean cloth.
WARNING NEVER immerse the mask, air hose and the main unit in the water.
Distributed by ForaCare, Inc.
893 Patriot Drive Suite D
Moorpark, CA 93021 USA
Products made in Taiwan
Toll Free: 1-888-307-8188
(6:30 am-5:30 pm PST, Mon.-Fri.)
For assistance outside of these hours,
please contact your healthcare professional.
www.foracare.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>