Shenzhen Muqi Electronic Acoustics MQ14 Muqi Wireless Speaker User Manual

: June 4, 2024
: Shenzhen Muqi Electronic Acoustics

Table of Contents

Package Contents
Product Diagram
Specifications
Getting Started
Button Function Instructions
Bluetooth Pairing
TWS Mode
FAQ
Warranty & Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MUQI
User Manual
Wireless Speaker

Thank you for purchasing the MUQI MQ-14 Wireless Speaker. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

Wireless Speaker
USB-A to C Cable
3.5mm Audio Cable
User Manual
Strap

Product Diagram

① Bluetooth Button
② Volume
③ Power Button
④ Light Button
⑤ Volume+
⑥ Play/Pause

Shenzhen Muqi Electronic Acoustics MQ14 Muqi Wireless Speaker -
fig2

Specifications

Model	MQ-14
Technology	A2DP V1.3,AVRCP V1.6,GAVDP V1.3,

Getting Started

Charging the Speaker
Fully charge the speaker before first use. Connect one end of the USB-A to C cable to the charging input port of the MQ-14 and the other end to a USB charger or charging port to charge.LED indicator red during charging, green after a full charge.

Note
When the battery voltage is lower than (equal to) 10.5V, a low battery alarm tone will appear, once at an interval of 15S, three times in a row, and will automatically shut down after the third alarm

Button Function Instructions

Functions	Instructions
Turn the speaker on / off	Press and hold (3)power buttons for 2 seconds
Switch mode	Short-press (3)power button (between BT and AUX mode)
Enter or exit TWS mode	Press and hold (1)Bluetooth button for 3 seconds
Play or pause	Short-press (6)play/pause button
Adjust volume	Short-press (5)/(2)volume + / – (synchronized with the volume

of the iPhone, not Android)
Skip to the next/previous track| Press and hold (5)/(2)volume + / – for 2 seconds
Answer or end the call| Short-press (6)play/pause button
Reject an incoming call| Press and hold (6)play/pause button for 2 seconds
EQ Switch| Press and hold (6)play/pause button for 2 seconds (3 EQ modes)
Disconnect BT| Short-press (1)Bluetooth button
Light on| Short-press ④light button to open/switch the light
Light off| Long press the ④light button to turn off the light

Note

Bluetooth & TWS mode: host/sub, on/off button, play/pause button, volume +/-, Bluetooth button, light button, and other operations the same
AUX mode: On/off button, volume +/-, play/pause button, and other operations are the same as those in Bluetooth and TWS mode.

Bluetooth Pairing

When you turn on the speaker, it will automatically enter pairing mode
Activate the pairing function on your phone and select “MUQI MQ-14”

Note

If you want to use another device to connect to MUQI MQ-14, please short-press the ①Bluetooth button to disconnect MUQI MQ-14 from the current device.
When you turn the speaker on, it will automatically reconnect to the last-paired device or enter pairing mode if no paired device is found
When the speaker is paused, or there is no Bluetooth connection, the speaker will automatically shut down after 10 minutes
If the speaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter the wireless range within 10 minutes. To connect to other devices, repeat the previous“pairing” steps

AUX Audio Input

Connect the MUQI MQ-14 to your PC, laptop, or other devices with the audio output port using the included 3.5mm audio cable.

Note

The speaker will disconnect from your phone or other paired devices when an audio cable is plugged into the audio input jack. Short-press ③ power button to switch back to BT mode
When playing audio using the audio input jack, press ⑤/②volume + / – to adjust the volume and short-press ⑥play/pause button to pause or resume. Next/previous track control on the speaker is disabled in audio input mode
For some computers, you may need to access the audio control panel to manually set the speaker as the default audio device

TWS Mode

First, connect one speaker to the phone successfully and leave the other speaker in the Bluetooth pending connection.
Press and hold the ①Bluetooth button of the speaker in Bluetooth connection for 3 seconds to enter TWS grouping mode, the ④light button flashes quickly, and there is a group pairing tone. The speaker that initiates the group pairing is the host.
During the TWS pairing process, Press and hold the ①Bluetooth button for 3 seconds to cancel the TWS pairing. If the TWS pairing exceeds 60 seconds and the TWS pairing is not successful, it will automatically return to the normal BT mode.
After the TWS pairing is successful, one of the LED lights of the two speakers is always on (this is the sub) and the other is flashing (this is the host).
After successful pairing, short press the ①Bluetooth button of the host/sub to disconnect the Bluetooth connection (the TWS connection will not be disconnected); long press the Bluetooth button of the host/sub for 3 seconds to disconnect the TWS connection (the Bluetooth connection will not be disconnected).
In TWS mode, when the speaker is turned on and off normally, the TWS can be reconnected. Long press the ①Bluetooth button to actively disconnect the TWS, and then the TWS will not be reconnected after turning it off and on.
In TWS mode, host/sub, on/off button, play/pause button, volume +/-, Bluetooth button, light button, and other operations are the same.

FAQ

The TWS pairing is unsuccessful?
Please check if the phone is connected to the Bluetooth of the two speakers at the same time. If yes, disconnect any of the speaker’s BT from the phone. The phone connects to TWS pairing mode. If no, press and hold one of the speakers ①Bluetooth button 3S to enter TWS pairing mode.

From TWS mode to AUX mode?
Use the audio cable to connect the host speaker to the desired device. Short press the ③Power button to switch back to Bluetooth mode.

Product Care & Use

Keep away from extreme heat and strong magnetic fields
Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or hearing loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number

E-mail: sales@szmuqi.com
*Please note, that MUQI can only provide after-sales service for products purchased directly from MUQI. If you have purchased from a different seller, please contact them directly for service or warranty issues.

Shenzhen muqi Electronic Acoustics Co.,Ltd.
Email: sales@szmuqi.com
http://www.szmuqi.com
Add: No.14, Fengye 8th Rd,Fenghuang,
Fuyong,Bao’an District, Shenzhen 518103