PHILIPS 2757776 Fluorescent Lamp Installation Guide
- June 9, 2024
- Philips
Table of Contents
2757776 Fluorescent Lamp
Installation Guide
2757776 Fluorescent Lamp
Packing list
Philips LEDtube : 10 pcs
EMP (to replace starter) : available as accessories
| SYMBOL | MEANING |
|---|---|
| DO NOT USE WITH DIMMERS | |
| LAMP SUITABLE FOR 50Hz OR 60 Hz OPERATION | |
| NEED TO BE USEDWITH LED REPLACEMENT STARTER EMP | |
| NEED TO BE USED IN DRY CONDITIONS OR IN A LUMINAIRE THAT PROVIDES PROTECTION |
THIS LAMP IS NOT SUITABLETO BE USED IN EMERGENCY LUMINAIRES DESIGNED FOR DOUBLE-CAPPED FLUORESCENT LAMP(S)
-
No modifications of the luminaire which the LED lamp is to be used with are to be made
-
This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used.The temperature range of this larnp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted -This lamp is designed for general lighting service(excluding e.g. explosive atmospheres)
-
In this application, LED replacement starter is not used.
-
Always switch off the power supply before commencing work!
-
Philips LED tube should be installed by qualified professionals in accordance with relevant code.
-
Stick the Warning Sticker on the luminaire after the modifications has been made.
© 2019 Signify Holding ignify
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner. The information presented in
this document does not form part of any quotation or contract, is believed to
be accurate and reliable and may be changed without notice. No liability will
be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent or other industrial
or intellectual property rights.
06/2019 www.philips.com/lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>