Metra 107-CH5 Jeep Grand Cherokee 1996-1998 Instruction Manual
- October 27, 2023
- Metra
Table of Contents
Metra 107-CH5 Jeep Grand Cherokee 1996-1998
KIT FEATURES
- ISO DDIN radio provision*
- Textured to match the factory finish
- This kit is designed for an ISO DDIN radio which have an “L” shaped chassis design, with the radio chassis at the top of the screen, or Pioneer modular 6.8” radios.
- † Refer to the radio manufacturer for current models
KIT COMPONENTS
- A) Radio trim panel
- B) Radio brackets
- C) Extension bracket
- D) Vent adapter
- E) #8 x 1/2” screw for drivers side (1)
WIRING & ANTENNA CONNECTIONS (sold separately)
- Wiring Harness: 70-1817
- Antenna Adapter: Not required
TOOLS REQUIRED
- 3/8” socket set
- Cutting tool/Dremel
- Panel removal tool
- Phillips screwdriver
Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition
DASH DISASSEMBLY
- Unsnap the climate control/wiper control trim panel and remove. (Figure A)
- Unsnap the headlight switch trim panel and remove. (Figure B)
- Remove (10) Phillips screws from the top and bottom of the radio/instrument cluster trim bezel. Pry out on the bottom edge of the bezel and remove. (Figure C)
- Remove (2) 3/8” hexhead screws securing the factory radio and disconnect the wiring.
KIT PREPARATION
- Cut and remove the climate vents from the factory dash panel. (Figure A)
- Cut the vent area of the factory dash panel. (Figure B
- Secure the extension bracket into the driver’s side of the dash opening and secure using factory hardware. (Note the grabbing clip at the back of the bracket) (Figure C)
- Place the vent extension into the factory vent opening. (Figure D)
KIT ASSEMBLY
Chassis Top DDIN radio provision
-
Snap the front mounting tabs off of the radio brackets. (Figure A)
-
Secure the radio brackets to the radio using screws supplied with the radio. (Figure B)
-
Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
-
Slide the radio assembly into to the dash, then secure using the factory
hardware for the passenger side and (1) #8 Phillips head screw for the driver’s side. -
Clip the radio trim panel to the factory dash panel.
-
Reassemble the dash in reverse order of disassembly to complete the installation
Pioneer Modular radio provision
Note: For steps 1 and 2, reference the installation manual provided with
the radio for which hardware to use. The display screen and radio chassis use
two different types of screws.
- Secure the radio brackets to the radio chassis using (4) screws supplied with the radio. (Figure A)
- Secure the radio display to the radio brackets using (4) screws supplied with the radio. (Figure B)
- Connect the radio display to the radio chassis.
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation
- Slide the radio assembly into to the dash, then secure using the factory hardware for the passenger side and (1) #8 Phillips head screw for the driver’s side.
- Clip the radio trim panel to the factory dash panel.
- Reassemble the dash in reverse order of disassembly to complete the installation
Having difficulties? We’re here to help.
Contact our Tech Support line at: 386-257-1187
Or via email at:techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most
recognized and respected mobile electronics school in our industry. Log onto
www.installerinstitute.com or call
800-354-6782 for more information and take steps toward a better tomorrow
References
- Home - Auto Sound
- Metra Online | Welcome to Metra Auto Parts Online Warehouse
- Installer Institute | Car Audio Installation and Mobile Electronics Education
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>