Metra 99-7019 Radio Stereo Mounting Installation Dash Kit Instruction Manual

: October 27, 2023
: Metra

Table of Contents

KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
DASH DISASSEMBLY
KIT ASSEMBLY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Metra 99-7019 Radio Stereo Mounting Installation Dash Kit Instruction Manual

KIT FEATURES

ISO DIN radio provision with pocket
High polished processing provides a gloss black finish that’s similar to both the aftermarket radio and factory finish.

KIT COMPONENTS

A) Radio trim panel
B) Radio brackets
C) Pocket
D) Phillips screws (8) TOOLS REQUIRED

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

See metra-online.com or axxessinterfaces.com
for audio and SWC interface options
Wiring harness: 70-7005
Antenna Adapter: Not required

TOOLS REQUIRED

Panel removal tool
Socket wrench
Phillips screwdriver

Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition.

DASH DISASSEMBLY

Unclip and remove the trim panel surrounding the radio including the vents. (Figure A)
Remove (4) screws securing the radio. Slide the radio out, then unplug and remove. (Figure B)

DASH DISASSEMBLY

KIT ASSEMBLY

Attach the radio brackets to the radio trim panel using (4) #(8) x 3/8” Phillips screws supplied. (Figure A)
Attach the pocket to the brackets using the (4) supplied #8 x 3/8” Phillips screws. (Figure B)
Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure C)
Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
Reassemble the dash in reverse order of disassembly

Having difficulties? We’re here to help.

Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com

Tech Support Hours (Eastern Standard Time)

Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

Mitsubishi Mirage2017-2020
Mitsubishi Mirage G42018-2020
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications