TONMIND SIP-S01-M IP Ceiling Speaker User Guide

TONMIND SIP-S01-M IP Ceiling Speaker

Specifications

• Model: SIP-S02, SIP-S11/T/H/M, SIP-S21/H, SIP-S21T/M, SIP-S22, SIP-S22T
• Features: Compatible with VOIP SIP device, ONVIF VMS, PoE eliminates need for local power supply, 48K OPUS Audio Codec, support pre-recorded messages, schedule, HTTP, alarm in

Product Usage Instructions

Hardware Interface
The IP Speaker comes with interfaces for Alarm in, PoE, and DC Power. The built-in MIC horn speakers SIP-S21H and SIP-S21M also have audio in capabilities. The IP Speaker can be powered by either PoE or DC Power.

Configuration
Option 1: Quick IPTool Setting

1. Visit www.tonmind.com to download IPTool for configuration. (Download routine: Support > Download Center > Software).
2. Scan the local area network devices.
3. Proceed with your settings.

Option 2: Complete Web Setting

1. Change the IP of your computer to the 192.168.5.X network segment.
2. Open a browser and type in http://192.168.5.200.
3. Enter the default user credentials on the Login page: User: admin, Password: tm1234.
4. Proceed with your settings.

Adding IP Speaker to VMS

1. Ensure that the VMS supports Onvif Profile S Audio Backchannel.
2. Login to the IP Speaker web interface and save ONVIF settings.
3. In the VMS software, scan for the IP Speaker and use the MIC icon to talk to the speaker. Note: For the built-in MIC speaker, it supports listen and intercom in ONVIF VMS from the speaker Mic.

FAQ

1. Q: How do I reset the IP Speaker to factory settings?
   A: To reset the IP Speaker to factory settings, locate the reset button on the device and press and hold it for at least 10 seconds until the device reboots.

2. Q: Can I use the IP Speaker outdoors?
   A: While some models may be suitable for outdoor use, it is recommended to check the specific IP rating and operating temperature range of the IP Speaker before using it outdoors.

IP Speakers Quick Start Guide

Features

• Compatible with VOIP SIP device.
• Compatible with ONVIF VMS.
• PoE eliminates need for local power supply.
• 48K OPUS Audio Codec enables excellent sound quality.
• Support pre-recorded messages, schedule, HTTP, alarm in.

Specification

Hardware Interface
The IP Speaker has interface of Alarm in, PoE and DC Power except that the built-in MIC horn speaker SIP-S21H and SIP-S21M also has audio in. The IP Speaker can be powered by PoE or DC Power.

Configuration

Option 1: Quick IPTool Setting

1. Enter www.tonmind.com to download IPTool for configuration.(Download routine: Support>Download Center>Software).
2. Scan Local area network devices.
3. Start your setting.

Option 2: Complete Web Setting

1. Change the IP of computer to 192.168.5.X network segment.

2. Open a browser and type in http://192.168.5.200

3. Enter the user name and password in Login page.
   Default user: admin
   password: tm1234

4. Start your setting.

Adding IP Speaker to VMS

1. Make sure the VMS supports Onvif Profile S Audio Backchannel.
2. Open IP Speaker web, login ONVIF and save.
3. Open VMS, scan the IP Speaker and press the MIC icon to “Talk” to speaker.

(Note: For the built-in MIC speaker, it supports listen and intercom in ONVIF VMS from speaker Mic)

References

• PA System,IP Speaker,SIP Paging Adapter | Tonmind
• PA System,IP Speaker,SIP Paging Adapter | Tonmind

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>