Burton Digital Induction Cooktop 18XL Instructions

Burton Digital Induction Cooktop 18XL

Featuring the latest in induction cooking technology.

• Precise temperature control using the included wireless Temperature Probe – ideal for sous vide, maintaining oil temperature, beer brewing and much more.
• Extra large 9” induction system accomodates larger cookware.
• Bright LCD display, touchpad and push-to set control knob.

IMPORTANT WARNINGS & SAFEGUARDS
Read all instructions thoroughly before operating this unit to avoid injury to self or property and avoid damage to the unit. Keep instructions handy for reference during use.
Caution : This unit emits an electromagnetic field. Persons with cardiac implanted pacemakers or other implantable heart devices should consult with their physician before using.

Electrical Hazards

• Do Not disassemble. There are no user serviceable parts. Contact Aervoe Industries, Inc. at 800- 227-0196 for assistance.
• Do Not submerge unit or electrical cord in liquid, touch with wet hands, or use in a wet environment
• Do Not use if cooktop is cracked
• Do Not operate if the cord has frayed and wires are exposed
• Do Not let cord hang over the edge of a table or counter
• Never move the unit by pulling on the power cord.

Personal Safety

• Do Not touch the hot cooktop surface or cookware. It may remain hot for several minutes after use.
• Do Not move the unit during cooking or with hot cookware on top
• Do Not place metal objects on the cooktop other than metal cookware or our Max Burton Induction Interface Disk.
• Do Not heat unopened cans of food. The container could explode.
• Do Not use in or around flammable or explosive environments
• Administer close supervision when operating around children
• Electric shock hazard. Only a qualified expert may perform repair and maintenance work on this unit. Never attempt to repair yourself.

Product & Property Damage

• Do Not place cookware with contents heavier than 60 pounds on the glass plate
• Do Not block the air inlet or exhaust fan. Keep the rear and sides of the unit at least 4” from walls for proper ventilation
• Do Not clean in a dishwasher
• Do Not use the unit for other than its intended use
• Do Not place objects with a magnetic strip near the unit while in operation
• Use a dedicated 120V, 15A electrical outlet that is not shared with other appliances to avoid overheating or shutdown.

FCC REQUIREMENTS

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help. FCC ID#

SELECTING THE PROPER COOKWARE

Your induction cooktop will not operate without the proper cookware. Size, shape, and construction are all factors for suitable cookware.

1. Suitable Cookware: the base of the cookware must be made of ferrous magnetic materials including cast iron, carbon steel, magnetic stainless steel or cast aluminum with an induction rated base.
2. Unsuitable Cookware: will cause an E0 error and the cooktop will not operate.
3. In general, if a magnet will stick to the bottom of the cookware, it will work on your induction cooktop. A magnet is included for you to use to test your cookware.
4. If proper cookware is not available we offer an Induction Interface Disk (#6010) that will provide the necessary connectivity between the induction cooktop and your non-suitable cookware. It is normal for reduced efficiency when using the Interface Disk.
   NOTE : Different types of cookware and sizes will result in varying wattage/heat efficiency. For maximum efficiency, do not use cookware with a base larger than 14” or a combined weight over 60 lbs.

OPERATING INSTRUCTIONS

If the unit doesn’t operate as intended, please see the Troubleshooting Guide.
Start-Up

1. Select cookware according to the instructions above.
2. Place the unit on a dry, level surface at least 4 inches away from other objects to allow proper ventilation.
3. Plug the power cord into a dedicated 120V/15A electrical socket. For optimum performance, use only one appliance per outlet. A red LED above ON/OFF will appear indicating the cooktop is ready to use.
4. Before turning the unit on, make sure the ingredients are in the cookware and place it on the glass plate centered over the COOKWARE PLACEMENT GUIDES.
5. Touch the ON/OFF symbol to turn the unit on. The LCD DISPLAY will illuminate and the default PL1 will show in the window. The cooling fan will turn on.
   NOTE : It is normal for the cooling fan to operate for up to 2 minutes after the unit has powered off.

Controls
All operations are easily controlled using the touchpad and PUSH TO SET CONTROL KNOB. The control knob will increase or decrease your selection by turning the knob. Once a desired setting is reached, push the knob to select it.

POWER LEVEL/TIMER MODE (10-watt settings)

This is the default mode. Use this mode for quick heat-up and where close temperature control is not a requirement. The higher the Power Level, the more wattage applied to the cookware and increased heating rate. Cookware will respond differently depending on type and size.

1. Touch the POWER LEVEL/TIMER symbol to select this mode. The default PL-1 will flash in the LCD window. Use the CONTROL KNOB to increase (clockwise) or decrease (counter-clockwise) the power as needed. Push the KNOB to lock in the setting.
2. Next the TIMER symbol will flash in the LCD window. You will then be able to set the timer from 1-180 minutes. For safety only 180-minutes is available. If 0 is selected or nothing is selected within a few seconds, the timer function will not be used.
3. Your cooktop will follow the power level and time settings you selected and turn off when finished. You can change the settings at any time by pressing the CONTROL KNOB and repeat these steps.
   POWER LEVEL SETTINGS| MEDIUM| PL6, PL7
   ---|---|---
   LOW| PL1, PL2, PL3| MED/HIGH| PL8, PL9
   MED/LOW| PL4, PL5| HIGH| PL10

ONE-TOUCH & LOCK FUNCTIONS

1. One-touch BOIL function will instantly select the PL-10 setting.
2. One-Touch SIMMER function will instantly select 100°F.
3. Touch the LOCK symbol at any time to lock in your desired setting. To unlock, touch and hold the LOCK symbol for 2 seconds or power the unit off and restart.

TEMP LEVEL/TIMER MODE (21 settings)

This mode is best when more accurate cooking temperature control is needed. It is important to realize that the following settings measure the temperature of the base of your cookware and not the temperature of the food you are cooking.

NOTE : For more precise temperature control, go to the TEMPERATURE PROBE section below.

1. Touch the TEMP LEVEL/TIMER symbol to select this mode. The default 100° temperature will flash in the LCD window. Use the CONTROL KNOB to increase (clockwise) or decrease (counterclockwise) the temperature as needed. Push the KNOB to lock in the setting. Temperature settings will increase by 10° from 100° to 200°F and by 25° from 225° to 450°F.
2. Next the TIMER symbol will flash in the LCD window. You will then be able to set the timer from 0-180 minutes. For safety only 180-minutes is available. If 0 is selected or nothing is selected within a few a few seconds, the timer function will not be used.
3. Your cooktop will follow the temperature level and time settings you selected and turn off when finished. You can change the settings at any time by pressing the CONTROL KNOB and repeat these steps.

TEMPERATURE PROBE MODE FOR PRECISE TEMPERATURE CONTROL

When precise temperature control is needed, use the wireless TEMPERATURE PROBE. This feature may be used with the TEMP LEVEL or PROGRAM COOKING modes only. Selected temperature will be closely maintained.

1. Clip the PROBE to the inside of the pan so that it is submerged in the pan contents or insert it into the meat you are cooking. It should not touch the bottom of the pan.
2. Press the ON/OFF button on the PROBE. A red LED on the probe will light up periodically to show it is active and a temperature probe icon will show in the LCD display during operation.
3. The current temperature of the food you are cooking (shown on the right side of LCD display) and the temperature you set it to reach (shown on the left side of LCD display) will alternately flash in the LCD display.
4. Clean the probe after use and store.
5. If the red LED does not come on when the probe is turned on, replace the battery with a standard A23/12V alkaline battery. The probe will automatically shut down if the induction is turned off or no change in temperature is detected after 30 minutes. Reset power as noted above.
6. Time can be set from 1-360 minutes below 200ºF and from 1-180 minutes above 225ºF.

PROGRAM COOKING MODE

This mode allows you to program up to 3 cooking time and temperature zones to create different stages of cooking. You can program all 3 zones or just one. It may be used in slow cooking, sous vide, beer brewing and much more; and can be used with or without the temperature probe.
Example : Zone #1 set at 300°F for 60 minutes; Zone #2 set at 225°F for 75 minutes; Zone #3 set at 100°F for 60 minutes.

1. Touch the PROGRAMMABLE COOKING symbol once to program Zone 1.

2. Zone 1 Temperature Setting:

   • 100ºF will flash in the display
   • Set your desired temperature by turning the CONTROL KNOB
   • Push the KNOB to lock in the temperature. It will then advance to the timer setting.

3. Zone 1 Timer Setting:

   • The timer icon will flash in the display
   • Set your desired time by turning the CONTROL KNOB
   • Push the KNOB to lock in the time and advance to Zone #2
     Note : Time can be set from 1-360 minutes below 200ºF and from 1-180 minutes above 225ºF.

4. Zone 2 and Zone 3 Settings:

   • Repeat the above instructions for Zone 2 and Zone 3
   • Each zone must be programed quickly, or the previous setting will be locked in
   • If either Zone 2 or Zone 3 are not needed, simply set the temperature and time the same as Zone 1.

5. After all 3 programs have been set, the LCD display will cycle through all of the settings and lock in.

6. If changes are needed after they are set, touch and hold the LOCK icon for 2 seconds and restart from the beginning.

CARE AND MAINTENANCE

• Do Not clean with metal scouring pads, abrasives, or solvents
• Do Not immerse cord or unit in water or other liquids
• Unplug when not in use and before cleaning
• Allow unit to cool before storing
• Do Not use if glass cooktop or power cord is damaged
• Keep away from other sources of heat
• Unplug and let cool before cleaning. Use a mild liquid detergent with a moist cloth to wipe off grease and stains. Let dry. Cover the unit to protect it from dust when being stored.
• Clean the TEMPERATURE PROBE after use.

TROUBLESHOOTING GUIDE & CUSTOMER SERVICE

If after reviewing the troubleshooting guide the problem is not resolved, do not attempt to repair. Contact your dealer or call our Customer Service Department at 1-800-227-0196 for additional information.

1. The Power Indicator light does not illuminate and/or the exhaust fan is not running.
   • The power plug may be loose in the electrical outlet or there might be a 120V power supply fault. Reset the circuit breaker and retry.
   • E3 error code means the 120V input power supply is receiving voltage that is too high or too low and shuts down after one minute. Unplug from the power receptacle and use a voltage sensor to verify that the voltage is at least 110V AC and not more than 120V AC. If not, switch electrical outlets or correct before operating the unit.
   • The fuse or circuit breaker has malfunctioned or the unit is unplugged.
2. The fan is not running and the cookware is not heating up. E0 or E2 error code may be displayed.
   • The cookware may be unsuitable and it is preventing operation (see Selecting the Proper Cookware). If no cookware is present an E0 code will show.
   • The cookware needs to be centered on the glass plate
   • The glass plate may be cracked
3. The induction cooktop suddenly stops heating during operation and shuts down. E1 or E2 error code may be displayed.
   • The overheating sensor detected an excessive high glass top temperature and caused it to automatically shut down. Heating empty cookware may cause this. Remove cookware and let everything cool down and retry.
   • The air inlet or exhaust fan is blocked or failed and caused it to overheat. Make sure the unit is at least 4” from walls and other objects and all vents are clear.
4. The TEMPERATURE PROBE is not accurately keeping to the set temperature.
   • Verify the Temperature Mode is selected.
   • Follow the instructions in the Temperature Probe Section above to turn it back on.

SPECIFICATIONS

Replaceable A23 12-volt alkaline battery

SAFETY FEATURES| Non-suitable cookware detection Overheat protection

Improper voltage supply detection

APPROVALS| ETL US (conforms to UL 1026 household rated) FCC ID# YT9-6600P

PRODUCT WARRANTY (see warranty card included)
Aervoe Industries, Inc. warrants that this product shall be free from all defects in material and workmanship for 1 year from date of purchase. All merchandise must be returned to the original place of purchase to be processed according to the retailer return policy. A warranty card must be on file with Aervoe Industries, Inc. within 30-days of purchase and proof of purchase is required to obtain warranty performance.

References

• Aervoe Industries, Inc. – Large enough to meet your needs… Small enough to know them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>