VIBES BM909111457 Wireless Charger User Manual

June 3, 2024
VIBES

VIBES BM909111457 Wireless Charger

VIBES-BM909111457-Wireless-Charger-product

SAFETY INFORMATION

To prevent injury to yourself and others or damage to your device, read the safety information about your device before using the device. Arovo cannot be held responsible for any injury or property damage caused by failure to comply with the safety cautions and regulations.

Read all instructions carefully and retain them for future reference.

  1. Please do not expose this device to moisture or heat sources.
  2. This is not a toy, not suitable for children.
  3. Do not use damaged power cords or plugs, or loose electrical sockets.
  4. Do not touch the power cord with wet hand or disconnect the charger by pulling the cord.
  5. Do not bend or damage the power cord.
  6. Do not drop or cause an impact to the charger or the device.
    • Store your device only on flat surfaces
    • If your device falls, it may be damaged.
  7. The device must be installed and used in a manner that keeps the device at least 10cm from users and bystanders.
  8. Keep your device dry
    • Humidity and liquids may damage the parts of electronic circuits in your device.
  9. Do not disassemble, modify or repair your device
    • Your device may malfunction and your risk of electric shock is increased.
    • Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take your device to a service center.
  10. For standard-speed wireless charging, you can use an adapter with a 5V 2A output or a standard USB port on your PC.
  11. Remove your smartphone from the wireless charger when fully charged, and remove the power from the charging base.

CHECK IF THE PACKAGING CONTAINS THE FOLLOWING ITEMS:
Marble wireless charger, usb cable and manual.

SPECIFICATION

  • Frequency band: 110-205kHz
  • Maximum radio frequency power: 38.54dBuA/m
  • Input: 5V 2A 9V 1.67A
  • Output: 5V 1A 9V 1.1A
  • Wireless Transmission Distance: 2-5mm
  • Transmission Efficiency: 75%
  • Material: ABS
  • Size: Φ100*6.5mm
  • Weight: 50g

USING THE WIRELESS CHARGER

  1. Make sure that the charging area (see picture) is in the same position as the receiver of the device to be charged.
  2. Connect the USB part to a power source.
  3. Make sure your phone is compatible for wireless charging.
  4. Place your wireless charging device on the wireless charging area.

NOTE:

  • Some phone cases may block wireless charging.
  • Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
  • Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
  • When the mobile device is not placed in the charging area accurately, your mobile device may not charge properly.

SUITABLE FOR

  • Apple iPhone: 11 Pro Max, 11 Pro, 11, XS Max XS, XR, 8, 8 Plus
  • Samsung Galaxy: Note 10 Plus 5G, Note 10 Plus, Note 10, S10 5G, S10 Plus, S10, S10e, Note 9, S9, S9+, Note 8, S8, S8+, S7, S7 Edge (Plus more devices)
  • Sony: Xperia XZ3, Xperia XZ2 Premium, Xperia XZ2 (Plus more devices)
  • LG: G7 ThinQ, V30, G6 (US version only), G4 (optional), G3 (optional) (Plus more devices)
  • Nokia: 9 PureView, 8 Sirocco
  • Huawei: Mate 30 Pro, P30 Pro, Mate 20 Pro
  • Microsoft Lumia: 1520, 1020, 930, 929, 928, 920
  • Google: Pixel 4 XL, Pixel 4, Pixel 3 XL, Pixel 3
  • Nexus: Nexus 6, Nexus 5
  • BlackBerry: Priv
Indicator light Device status
Red and blue flashes alternatively When the power is just connected.
Red The charging station is on but no device is being charged; After

the compatible device is fully charged, the light turns red.
Blue| A compatible device is being charged.
Off| The USB cable is not connected, charging function is off.

PRODUCT OVERVIEW

  1. LED Indicator light (Blue)
  2. LED Indicator light (Red)
  3. Charging port
  4. Wireless charging area
  5. USB cableVIBES-BM909111457-Wireless-Charger-fig-1

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Declaration of Conformity. Products marked with this symbol comply with all the applicable Community regulations of the European Economic Area. The EU Declaration of Conformity can be requested from the manufacturer.

The packaging can be reused or recycled. Please dispose properly of any packaging material no longer required. If you notice any transport damage during unpacking, please contact your dealer without delay.

If you notice any transport damage during unpacking, please contact your dealer without delay.

Qi Certification is the WPC’s product certification program for wireless charging devices. The WPC uses a network of independent authorized test labs around the globe that test specific properties for safety, interoperability, and usability, each of which can involve multiple test procedures. Only Qi- Certified products are allowed to carry the Qi logo.

WARRANTY

For 12 months after the date of purchase in respect of defects found – at our discretion – to be due to faulty workmanship or material. The warranty is valid only with a receipt. There is no warranty on appliances found to be defective due to improper usage, disassembling or accidental breakage. The warranty is not valid for damages resulting from defects.

EU DECLARATION OF CONFORMITY

We;
B&M Retail Ltd., Dakota Drive Liverpool, L24 8RJ, UK

Declare under our own responsibility that the product:

  • Article number: BM909111457 / 363819
  • Article name: Vibes marble Qi wireless charger
  • Barcode:
    • 8720039718593 – Rose gold
    • 8720297453427 – Gold

The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

  • ROHS 2011/65/EU
  • RED 2014/53/EU
  • (EU) 2015/863

Meets the conditions laid down in the following harmonised standards:

  • ETSI EN 303 417 V1.1.1 (2017-09)
  • ETSI EN 301 489-1 V2.2.2 (2019-09)
  • ETSI EN 301 489-3 V2.1.1 (2019-03)

Made in China
B&M Retail Ltd, Dakota Drive, Speke, Liverpool, L24 8RJ, UK Centz Stores 7 Ltd, 5 Old Dublin Road, Dublin, A94 K1H5, Ireland.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals