CREALITY Box 2.0 Wireless Control Intelligent Assistant User Manual
- June 5, 2024
- Creality
Table of Contents
CREALITY Box 2.0 Wireless Control Intelligent Assistant
PARTS LIST
Machine introduction
- RJ45 network port
- Connect printer/camera
- Micro USB power interface
- TF card connector
- Reset button
- Yellow light: WIFI working status
- Blue light: Ethernet indicator
- Green light: Cloud/distribution network indicator
- Red indicator: TF card indicator
Assembly procedure
-
The product is working when the yellow indicator flashes.
-
The connection is successful when the green indicator flashes, but it is failed when the indicator keeps on.
-
The TF card is not inserted when the red indicator keeps on.
-
Insert the TF card (FAT32/exFAT format) into the TF card connector of the box.
-
Connect the MINI/Micro USB port of printer and the USB1 /USB2 port of the box with the USB cable equipped with the printer, and turn on.
-
Ensure the connection successful between the port “5V /2.4A” of product and the power supply by the USB cable and turn on, and networking either Ethernet or Wireless.
Download Creality Cloud APP
Download the APP “Creative Cloud” by app store or scanning the QR code on the packing box, register and log in, click the “Add Device” and “Bluetooth Networking”, or Scan Code to Add” to select your device.
Network Configuration
Method 1: Click “Add Device” —> “Bluetooth Network Configuration” to select your device
Method 2: Click “Add Device” —> “Scan Code to Add” to select your device
MODEL PRINTING
Select model, printer, device to print through the APP after connection and online.