Alecto 0501000EU Smart Life Camera Instruction Manual

Alecto 0501000EU Smart Life Camera

Product Usage Instructions

Installation:

1. Connect the power input to the designated port.
2. If available, insert a Micro SD card into the designated slot.
3. Familiarize yourself with the placement of components like the speaker, microphone, and reset button.

Download the Smart Life App:

1. Ensure your device is connected to the same Wi-Fi network as your smartphone or tablet.
2. Download and install the Smart Life app from the respective app store.

App Functions:

• Take screenshots using the designated button.
• Use the microphone button for two-way audio communication.
• Record videos by pressing the video recording button.
• If applicable, playback recordings are stored on the Micro SD card.
• Adjust motion and sound detection settings within the app.
• Access a photo album for storing screenshots and videos.

Frequently Asked Questions (FAQ):

• Q: How do I reset the device?
  A: To reset the device, locate the reset button and hold it for at least 6 seconds until you see a flashing light indication.

• Q: What should I do if the device shows a constant red light?
  A: If the device displays a constant red light, refer to step 7b in the installation instructions or contact customer support for further assistance.

GENERAL

• Read and keep the instructions. All the safety and operating instructions should be read before use.
• This device can’t replace responsible adult supervision.
• This device is designed for indoor use only.
• The units should not be exposed to rain or moisture.
• The units should not be exposed to direct heat sources.
• This product is not a toy and should be kept out of children’s reach.
• This product contains small parts, take care when unpacking and assembling the product.
• Children can become entangled in the cords, therefore power cords should be kept more than 1 meter away from the crib and baby’s reach at all times.
• The units should only be used with the AC power adapters included in this package (rated 5V; 1.0A).
• Don’t use the units if the cord or plug is damaged.
• Don’t attempt to repair or adjust any of the electrical or mechanical functions of the unit, if you do, the guarantee will be made void.
• This product must not be placed in an enclosed area that may impede the airflow.

ATTENTION

• Make sure that the product is within range of the router during the registration.
• The product only supports 2.4GHz WiFi networks.
• As standard, the sound and motion detection alarms are off. Make sure that you activate the desired notifications immediately after installation.
• The product can only be registered to one account. Make sure you remove the device from the app before changing ownership.
• In the event of a connection problem, you will only receive a message in the app after 30 minutes.

WHAT’S IN THE BOX

DESCRIPTION

1. Status indicator light
2. Power input
3. Micro SD card slot
4. Speaker
5. Microphone
6. Reset

INSTALLATION

PLACEMENT

REMOVE DEVICE

APP FUNCTIONS

• Take screenshot
• Microphone button
• Video recording button
• Playback of recordings on an SD card (if available)
• Motion and sound detection settings
• Photo album: storage of screenshots and videos

SPECIFICATIONS

• Image Sensor: 1/3’’ 2 Megapixel CMOS
• Shutter: 1/15~1/10,000s
• Min Illuminance:
  • Color 0.01Lux@F2.0
  • Black/White 0.01Lux@F2.0
• Lens: 3.6mm @F2.0
• Viewing Angle: 100°
• IR distance: Night visibility up to 10m
• Day/Night: Auto (ICR)/Color/B/W
• Effective pixels: 1920(H) x 1080(V) P
• WDR: Digital WDR
• Video Compression: H.264/H.265
• Bit rate: 32Kbps~2Mbps
• Audio input/output: Built-in mic/speaker
• Storage:
  • SD card (max. 128G),
  • Cloud Storage, NVR
• Wireless RF mode frequency band: 2412-2472 MHz
• Transmit Power: < 20 dBm
• Wireless communication protocol: 2.4G WIFI (IEEE802.11 b/g/n)
• Security: User authentication, software encryption
• Alarm Trigger: Intelligent motion detection
• Communication Protocol: HTTP, TCP/IP, DHCP, DNS, RTSP
• Interface Protocol: Private
• Operating System: Android 5.0+ or iOS9.0+
• Operating Temperature: -20˚C to 50˚C
• Dimensions: 80x60x73mm
• Net weight: 78g
• LED light indication:
  • Red solid: Camera network not OK
  • Red blinking: Awaiting wifi connection
  • Blue solid: Camera running correctly
  • Blue blinking: Currently connecting
• Adapter model no.: GTA92-0501000EU
• Manufacturer’s name and address: Dongguan Green Power One Co., Ltd, No.26, Hongyun Street, Chonghe Village, Qingxi Town, Dongguan, 523641 Guangdong, China.
• Input voltage: 100-240VAC
• Input AC frequency: 50/60 Hz
• Output voltage: 5.0V DC
• Output current: 1.0 A
• Output Power: 5.0 W
• Average active efficiency: 74.13 %
• Efficiency at a low 10% load: –
• No load Power consumption: 0.1 W

Commaxx B.V.
Wiebachstraat 37
6466NG Kerkrade
The Netherlands
www.alectobaby.com

EU DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type SMARTBABY5 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://DOC.hesdo.com/SMARTBABY5-DOC.pdf

References

• Alecto Baby | #1 in Babyfoons & Babycare

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>