rocstor Y10P024-B1 USB CK1 Wired Keyboard and Mouse Combo User Manual

rocstor Y10P024-B1 USB CK1 Wired Keyboard and Mouse Combo

Product Information

Specifications:

• Product Name: USB CK1 Wired Keyboard & Mouse Combo
• Model Number: Y10P024-B1
• Connection: USB Wired

Product Usage Instructions

Setting up Your Keyboard / Mouse:

1. Turn on your computer.
2. Connect the Keyboard & Mouse cables to an available USB port.
3. Allow the system to automatically install the necessary drivers.
4. You are now ready to enjoy the fundamental capabilities of your products.

FAQs

• What should I do if my keyboard or mouse is not working after connecting?
  If your keyboard or mouse is not working after connecting, try the following steps:

1. Check if the USB port is functioning properly by connecting another device.
2. Restart your computer and reconnect the keyboard and mouse.
3. Ensure that the drivers are properly installed.
4. Contact technical support for further assistance.

• How do I clean my keyboard and mouse?
  To clean your keyboard and mouse, follow these steps:

1. Turn off your computer and disconnect the keyboard and mouse.
2. Use a soft, lint-free cloth dampened with water or a mild cleaning solution to gently wipe the surfaces.
3. Avoid getting moisture into any openings or ports.
4. Allow the keyboard and mouse to dry completely before reconnecting them.

Setting up Your Keyboard / Mouse

1. Turn on your computer.
2. Connect the Keyboard & Mouse cables to available USB port and allow the system to automatically install the necessary drivers.
   Now you’re ready to enjoy fundamental capabilities of your products.

Troubleshooting

The keyboard/mouse not working.

• Check your keyboard/mouse USB connections.
• Try different USB ports on the computer.
• If the keyboard/mouse still not working, restart the computer.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT

Technical Compliance Notice
Title: FCC Part 15 Compliance Declaration
This document pertains to FCC Part 15 compliance for the specified equipment. Please be aware of the following important information regarding the operation and installation of this digital device in accordance with the Federal Communications Commission (FCC) Rules.

1. Compliance with FCC Part 15 : This equipment has undergone rigorous testing and has been found to conform to the requirements set forth in Class B for digital devices, as per FCC Part 15. These limits have been speciÿcally established to offer reasonable protection against potentially disruptive interference in residential environments.
2. Radio Frequency Emissions: It is important to note that this equipment is designed to generate, employ, and emit radio frequency energy. Incorrect installation or use that deviates from the provided instructions may result in harmful interference with radio communications. While we strive to minimize interference, we cannot guarantee that it will not occur in certain installations.
3. Correcting Harmful Interference: If you suspect that this equipment is causing harmful interference to radio or television reception, you are encouraged to take the following corrective measures:
   • Reorient or relocate the receiving antenna.
   • Increase the physical separation between the equipment and the receiver.
   • Connect the equipment to an outlet on a different circuit from the one to which the receiver is connected.
   • Seek assistance from your dealer or a knowledgeable radio/TV technician.
4. Modifications: Any modifications to the equipment that have not received explicit approval from Rocstor may void the user’s authorization to operate the device in compliance with FCC regulations. Avoid making any unauthorized modiÿcations.
5. Shielded Cables: To adhere to FCC requirements, it is imperative that all connections involving equipment using a Rocstor Input device are made using exclusively shielded cables.
6. FCC Declaration of Conformity: This product is in conformity with the provisions of FCC Part 15. Its operation is subject to two key conditions: (1) This device should not be the source of harmful interference. (2) This device must accept any received interference, even if it results in undesired operation.
   According to Section 2.909 of the FCC Rules, the party responsible for this device’s compliance is Rocstor, with contact information as follows: Rocstor 12979 Arroyo Street San Fernando, CA 91340, USA Telephone: 1-818-727-7000

Technical Support / RMA

• Hours: 9:00 am – 5:00 pm PST
• Monday to Friday (except holidays)
• Tell: +1 818-727-7000 (National and international)
• Fax: +1 818-875-0002
• Email: support@rocstor.com
• www.rocstor.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>