ANSMANN FL Series Industrial Light User Manual

: August 30, 2024
: ANSMANN

Table of Contents

ANSMANN FL Series Industrial Light
Model Types
FL20W-AC – 1600-0632 / FL50W-AC – 1600-0627
PRODUCT DESCRIPTION
FL100W-AC – 1600-0628 / FL150W-AC – 1600-0629
SAFETY – EXPLANATION OF NOTES
GENERAL SAFETY INSTRUCTIONS
Documents / Resources

ANSMANN FL Series Industrial Light

Model Types

FL20W-AC – 1600-0632 / FL50W-AC – 1600-0627

PRODUCT DESCRIPTION

Handle
Cable entry
LEDs
Mounting bracket
80°-fold-out stand

FL100W-AC – 1600-0628 / FL150W-AC – 1600-0629

PRODUCT DESCRIPTION

Handle
Mounting bracket
LEDs
Cable entry
80°-fold-out stand

SAFETY – EXPLANATION OF NOTES

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging:

Circle-info Information| Useful additional information about the product circle-check Note | The note warns you of possible damage of all kinds triangle-exclamation.
Caution | Attention – Hazard can lead to injuries triangle-exclamation
Warning | Attention – Danger! May result in serious injury or death.

GENERAL INFO / FOREWORD

Please unpack all parts and check that everything is present and undamaged. Do not use the product if damaged. In this case, contact your local authorised specialist or the service address of the manufacturer. circle-check These operating instructions contain important information for the first use and normal operation of this product, referred to in the following text simply as lamp or product. Read through the complete operating instructions carefully before using the product for the first time. Keep these operating instructions for future use or for future users’ reference. Failure to follow the operating instructions and safety instructions may result in damage to the product and hazards (injuries) for the operator and other persons. The operating instructions refer to applicable standards and regulations of the European Union. Please also adhere to the laws and guidelines specific to your country.

PROPER INTENDED USE
The product serves as a mobile light source and is not intended for use in other applications. The product is intended exclusively for private, household use and is not suitable for commercial use or for household room lighting and is only for use as described in the operating instructions. Use outside that stipulated in the information is improper use and this can result in damage to property or personal injury. We accept no liability for damage caused by incorrect or improper use.

GENERAL SAFETY INSTRUCTIONS

This product may be used by children from the age of 8 and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they have been instructed on the safe use of the product and are aware of the hazards. Children are not permitted to play with the product. Children are not permitted to carry out cleaning or care without supervision.
Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product or packaging.
Avoid eye injuries – Never look directly into the beam of light or shine it into other people’s faces. If this occurs for too long, the blue light portion of the beam can cause retinal damage.
Never touch a device that is connected to the mains with wet hands, or if it has fallen into water. In this case, first switch off the house circuit breaker and then pull out the mains plug.
Do not expose to potentially explosive environments where there are flammable liquids, dusts or gases.
Never submerge the product in water or other liquids.
Use only an easily accessible mains socket so that the product can be quickly disconnected from the mains in the event of a fault.
All illuminated objects must be at least 10cm away from the lamp.
Use the product exclusively with the accessories included with it.
Do not short-circuit connection terminals or batteries.

DANGER OF FIRE AND EXPLOSION

Do not use while still in the packaging.
Do not cover the product – risk of fire.
Never expose the product to extreme conditions, such as extreme heat/cold etc.
Do not use in the rain or in damp areas.

GENERAL INFORMATION

Do not throw or drop
The LED cover cannot be replaced. If the cover is damaged, the product must be disposed of.
The LED light source cannot be replaced. If the LED has reached the end of its service life, the complete lamp must be replaced.
Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
Disconnect the device from the power supply only by pulling on the plug or plug housing, never on the cable.
Information for the light and mains adapter as well as mains voltage on the socket must match with the type plate.
The lamp shall not be placed face-down or allowed to topple face-down.

ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type. Cardboard and cardboard to the waste paper, film to the recycling collection. Dispose of the unusable product in accordance with legal provisions. The “waste bin” symbol indicates that, in the EU, it is not permitted to dispose of electrical equipment in household waste. For disposal, pass the product on to a specialist disposal point for old equipment, use the return and collection systems in your area or contact the dealer from whom you purchased the product.

LIABILITY DISCLAIMER
The information contained within these operating instructions can be changed without prior notification. We accept no liability for direct, indirect, incidental or other damage or consequential damage arising though improper handling/use or through disregard of the information contained within these operating instructions.

HANDLING NOTES

Always carry the product using the handle
Always set the product down on its mount.
Hang the product only with the hanging eye
The joint has a resistance in order to prevent unintentional adjustment. Change the angle of the stand slowly and smoothly.

ADJUSTING THE SPOTLIGHT

Loosen the two locking screws.
Adjust the angle of the spotlight.
Tighten the locking screws again.

Subject to technical changes. We assume no liability for printing errors.

DESCRIPTION SYMBOLS

Customer service:
ANSMANN AG
Industriestrasse 10
97959 Assamstadt
Germany
Support & FAQ: ansmann.de
E-Mail:hotline@ansmann.de
Hotline: +49 (0) 6294 / 4204 3400
MA-1600-0632/1600-0627/1600-0628/1600-0629/V0/03-2024.

Documents / Resources

| ANSMANN FL Series Industrial Light [pdf] User Manual
FL20W-AC - 1600-0632, FL50W-AC - 1600-0627, FL100W-AC - 1600-0628, FL150W-AC - 1600-0629, FL Series Industrial Light, FL Series, Industrial Light, Light
---|---