LASER LSH-ODCAM Outdoor Camera User Manual
- June 3, 2024
- Laser
Table of Contents
LASER LSH-ODCAM Outdoor Camera
Thank you for your purchase
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code
WHAT’S IN THE BOX
- Outdoor Camera
- USB Cable
- Screw Set
- User Manual
SPECIFICATIONS
CMOS Sensor: 1 / 2.0” 2MP
Resolution: Up to 1920 x 1080p @ 15fps
Battery: 3.7V, 6600mAh (3 x 18650 built-in)
Charging: DC5V 2A via USB-C
Night Vision: 8m distance
PIR Motion Sensor: 100° 5m distance
Network: 2.4GHz Wi-Fi (5GHz not supported)
Speaker Output: 2W
Microphone: -38dB
IP Rating: IP65
Storage: Micro SD Card up to 128gb
App: Laser SmartHome
OS Version: Android 5.0 and iOS 8.0 and above
Dimensions: 83 x 63 x 133.5mm
Weight: 300g
PRODUCT DIAGRAM
Reset Button Controls
- Press and hold for 10 seconds to reset the camera.
- A LED indicator light will start flashing
There are 2 flashing states
- Fast Flashing = QR and EZ pairing mode.
- Slow Flashing = AP pairing mode.
Note: In this manual we cover the QR pairing mode instructions
Getting Started with the App
- Install the Laser SmartHome App for your Smartphone from the iOS App Store or Google.
- Log in with an existing Laser SmartHome account or create a new account.
Connecting to the App
- Press and hold the “RESET” button on the Outdoor Camera till you get a fast-flashing indicator light.
- Open the Laser SmartHome App and tap the “+” icon to add a device.
- Select the “Camera & Lock” category on the left, then select “Smart Camera (Wi-Fi)”.
- Enter your Wi-Fi details.
- On the next screen tap the option in the top right and select “QR Code”.
- Select the checkbox, then tap Next.
- On the next screen you will need to hold the QR Code on the App towards the camera lens on the Outdoor Camera. A tone will be heard when done correctly. Tap “I Heard a Prompt” to continue. Tip: Move the QR code on the phone away, then towards the camera lens a few times so that it can detect it properly.
- Wait for network pairing to complete.
- When finished pairing tap “Done”, then the device will appear on the Laser SmartHome App home screen
NOTE: If you are unable to pair successfully with the Outdoor Camera, please check your Wi-Fi password and make sure you are only using a 2.4GHz Wi- Fi connection. 5GHz connections are not supported.
Camera Controls
Micro SD Card & Motion Detection
- A Micro SD Card installed in the camera will allow your camera to automatically take a video when motion is detected (PIR Motion Detection must be turned on).
- Without a Micro SD Card, your camera will only take photos when motion is detected (PIR Motion Detection must be turned on).
- The Micro SD Card has a loop recording feature where older files will be overwritten for newer recordings, so you will never run out of storage space.
Note: Cloud subscription service is a paid optional service which works the same as an inserted Micro SD Card. We would recommend using the Micro SD Card option.
Adding Laser SmartHome to the Google Home App
- Open the Google Home App.
- In the “Google Home” main screen, select the “+” icon to set up device.
- Select “Set up device” to add new device, then select “Works with Google”.
- A list will appear showing actions and a search function to access more apps: from here, search for the Laser SmartHome App.
- Log into your Laser SmartHome account with your email address.
- Once linked, it will show the devices linked to your account: you can assign them to rooms. You will be prompted to authorize apps to sync.
- Click “Done” and then it will give you a list of commands available.
- When successfully linked, you will see the Floodlight Camera on your “Home Control” screen.
TROUBLESHOOTING
The Outdoor Camera video feed is not loading.
- Make sure your smartphone and the Outdoor Camera are connected to the same Wi-Fi connection.
- Check the distance between the Outdoor Camera and your Wi-Fi router. Any obstructions such as walls and ceilings will reduce the range of your Wi-Fi signal.
- Remove the Outdoor Camera from its location and bring to the same room as the Wi-Fi router. Allow approx. 5 minutes then check the video feed again. If the video feed loads, then your camera placement may be too far from your Wi-Fi router and an access point may be required to bridge the gap. Alternatively find another location for the Outdoor Camera or Wi-Fi router (if possible).
I am unable to connect the Outdoor Camera to the Laser SmartHome App.
- Check the Outdoor Camera has a fast-flashing indicator light. If the light is flashing slowly, press and hold the “Reset” for 10 seconds to switch to a fast-flashing light.
- Check you are only connecting to a 2.4GHz Wi-Fi network. 5GHz networks are not supported.
- Check the Wi-Fi password you are using is correct. If unsure, try connecting another device to the same Wi-Fi network using that password. If that device fails to connect also then you may be using an incorrect password.
- When scanning the QR code move the QR code on the phone away, then towards the camera lens a few times so that it can detect it properly. If a tone is not heard from the Outdoor camera then the QR code has not been detected.
Can I use Laser SmartHome on my computer?
- The Laser SmartHome App is only designed to work on Smartphones and Tablets that use the Apple App store and the Google Play Store.
Visit our website www.laserco.com.au
Check us out at www.youtube.com/lasercoau