HOLLYLAND 5601TA Full Duplex Wireless Intercom System User Guide

: August 28, 2024
: HOLLYLAND

Table of Contents

HOLLYLAND 5601TA Full Duplex Wireless Intercom System
FAQ
Configuration
Overview
Operations
Specifications
Disclaimer
Compliance Information
FCC Regulatory Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOLLYLAND 5601TA Full Duplex Wireless Intercom System

Product Specifications

Dimensions: 100mm x 142mm
Weight: 100g
Model: Solidcom SE
Version: V2.0

FAQ

Q: How do I dispose of the battery?

A: Do not dispose of the battery in fire, a hot oven, or mechanically crush it. Seek a competent recycling organization or retailer for proper disposal.

Q: Where can I find the EU declaration of conformity?

A: The original EU declaration of conformity can be found at www.hollyland.com.

Thank you for choosing the Solidcom SE for on-site communication. If you have never used a wireless intercom system before, then you are about to experience one of the most exciting products in the industry This Quick Guide will show you how to get started with the product.

Please read this Quick Guide carefully. We wish you a pleasant experience. To obtain Quick Guide information in other languages, please scan the QR code below.

Configuration

Note: The quantity of the items depends on the product configuration detailed on the packing list card.

Overview

Indicator Introduction

Disconnected*: slowly flashing green light
Pairing: rapidly flashing green light
TALK Status: solid green light
MUTE Status: solid red light
Low Battery: slowly flashing red light
USB-C Charging:
A. Charging While Powered On: slowly flashing yellow light for 3s before returning to the former light
B. Charging While Powered Off: slowly flashing yellow light
USB-C Fully Charged: solid yellow light
Upgrading: alternately flashing red and green light

Notification Sound Introduction

Low Battery: low battery level
Ding: maximum volume
Tick: mic boom in position of mic on or off
Connected: device connected
Disconnected: device disconnected
Unmuted: mic on
Muted: mic off
While disconnected, the remote headset shows slowly flashing green light while the master headset shows solid green light.

Operations

Installing and removing the battery
Place the battery into the battery compartment for installation.
Press the battery compartment button to pop out the battery for removal.
Turning on the device and confirming connection
Toggle the power switch to turn on the headsets.
The indicator light changing from flashing green to solid green indicates successful connection.
The master headset has a brown headband while the remote headset has a black headband.
Turning on the microphone
Beginning your work

Headset Pairing

All remote headsets are prepaired with the master headset at the factory, so they are ready to use upon poweron. Pairing is only necessary when adding new headsets to an existing system. Ensure that the master headset and all remote headsets are powered on while pairing.

Long press the volume+ button on both the master and remote headsets for 5s and the indicator lights will flash rapidly.
The indicator lights turning solid indicates successful connection.
One master headset can connect to up to seven remote headsets.

Specifications

Note: Due to differences in various countries and regions, there may be variations in the operating frequency and wireless transmit power of the product.

Disclaimer

Safety Precautions
Do not place the device near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery from overheating and exploding. Use the original charger, data cables, and batteries provided with the product. Using unauthorized or incompatible chargers, data cables, or batteries may cause electric shock, fire, explosion, or other dangers.

Support
If you encounter any problems in using the product or need any help, please contact Hollyland Support Team via the following ways:

Hollyland User Group
HollylandTech
HollylandTech
HollylandTech
support@hollyland.com
www.hollyland.com

Statement:
All copyrights belong to Shenzhen Hollyland Technology Co., Ltd. Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form.

Trademark Statement:
All the trademarks are owned by Shenzhen Hollyland Technology Co., Ltd.

Note:
Due to product version upgrades or other reasons, this Quick Guide will be updated from time to time. Unless otherwise agreed, this document is provided as a guide for use only. All representations, information, and recommendations in this document do not constitute warranties of any kind, express or implied.

Manufacturer: Shenzhen Hollyland Technology Co., Ltd. Address: 8F, 5D Building, Skyworth Innovation Valley, Tangtou Road, Shiyan Street, Baoan District, Shenzhen, 518108, China MADE IN CHINA

Compliance Information

Regulatory Information
Hereby,Shenzhen Hollyland Technology Co.,Ltd declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at www.hollyland.com.

RF Exposure Information
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 5 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.

CAUTION： RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

UK Regulatory Information
Hereby,Shenzhen Hollyland Technology Co.,Ltd declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at www.hollyland.com.

FCC Requirement

FCC ID：2ADZC-5601TA
FCC ID：2ADZC-5601RA

FCC Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired op-eration.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is en-couraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure Information
The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.This device is designed and manufac-tured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequen-cy bands, and placed in positions that simulate RF exposure in usage against the head with no separation. Although the SAR is determined at the highest certified power level, the actual SAR level of the de-vice while operating can be well below the maximum value.Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF perfor-mance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided.

MIC Certification