Lincat CT2 Conveyor Toaster Instruction Manual

Lincat CT2 Conveyor Toaster

Specifications:

• Model : CT2
• Height : 465mm
• Width : 365mm
• Depth : 495mm (650mm inc. toast tray)
• Weight : 23.6kg
• Power Rating : 3.0 kW

Product Usage Instructions

Installation and Commissioning:

• This appliance must be earthed.
• An equipotential bonding terminal is provided for cross-bonding with other equipment.
• When replacing the plug, connect the terminals as follows:
  • Green and Yellow wire to Earth (E)
  • Blue wire to Neutral (N)
  • Brown wire to Live (L)
• Fit feet to holes provided in the base. Install the applianceon a level, heat-resistant surface.

Operating Instructions:

• The EcoSence CT2 toaster is fully automatic, adjusting the element power according to demand for energy savings.
• Central control position usually produces suitable results.
• Use bread at least one day old for best results.
• Items placed on the conveyor will return upside down into the toast tray.

Cleaning:

• Do not use a water jet or steam cleaner, and do not immerse the appliance.
• Clean all panels with warm water and mild detergent, avoiding abrasive materials.
• Dry with a soft cloth. Do not remove the crumb tray when the appliance is running as it will be hot

Please make a note of your product details for future use:

• Date Purchased:_____
• Model Number:__
• Serial Number:__
• Dealer:_____

IMPORTANT INFORMATION

• Read these instructions carefully before using this product, paying particular attention to all sections that carry warning symbols, caution symbols and notices. Ensure that these are understood at all times.

• WARNING!
  This symbol is used whenever there is a risk of personal injury.

• CAUTION!
  This symbol is used whenever there is a risk of damaging your Lincat product.

• NOTE:
  This symbol is used to provide additional information, hints and tips.

WARNINGS AND PRECAUTIONS

• This appliance must be installed, commissioned, and serviced by a qualified person in accordance with national and local regulations in force in the country of installation.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person.
• Ensure that the plug/socket is always accessible.
• Strip plastic coating and clean the appliance before use.
• During operation parts may become hot – avoid accidental contact.
• Disconnect this appliance before servicing, maintenance, or cleaning.

TECHNICAL DATA

Model| Height (mm)| Width (mm)| Depth (mm)| Weight (kg)
---|---|---|---|---
CT2| 465| 365| 495 (650 inc. toast tray)| 23.6

CHECK LIST OF ENCLOSURES

• Warranty Card
• Instructions Manual
• Wire feed rack
• Crumb tray
• Toast tray

INSTALLATION AND COMMISSIONING

This appliance must be earthed. An equipotential bonding terminal is provided to allow cross bonding with other equipment.

If replacing the plug connect the terminals as follows:

• Green and Yellow wire Earth E
• Blue wire Neutral N
• Brown wire Live L

Fit feet to holes provided in base. Install this appliance on a level, heat resistant surface ensuring all vents are unobstructed. Any partitions, walls or furniture must be of non-combustible material. Minimum distances A 100mm B 1000mm – see Fig 1.

Power Rating

OPERATING INSTRUCTIONS

• The EcoSence CT2 toaster is fully automatic adjusting the element power according to demand to achieve the greatest energy savings.

• Fit the crumb tray (F) so it is flush at the front and secured internally.

• Place the toast tray (H) onto the front of the appliance.

• Place the wire toast rack (G) into the toast tray.

• Connect the appliance to the electricity supply.

• Turn switch (B) to the ON position. The WAIT Amber neon (C) illuminates and the control panel cooling fan will start. The belt is stationary at this point.

• In approximately 4 minutes the Green READY neon (D) will illuminate, and the belt will start.

• Feed product into the toaster via the wire feed rack (E).

• The browning control (A) is shown in the central control position and has two positions anticlockwise, lighter, and lightest, and two positions clockwise darker and darkest.

• For most products the central control position will produce suitable results.

• Best results are obtained by using bread at least one day old.

• Note that items placed on the conveyor will return upside down into the toast tray.

CLEANING

• Do not use a water jet or steam cleaner, and do not immerse this appliance.
• Clean all panels with warm water and mild detergent, do not use abrasive materials. Dry with a soft cloth.
• Do not remove crumb tray when the appliance is running as it will be hot.

SERVICING, MAINTENANCE AND COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be carried out by one of our recommended service engineers.

FAULT FINDING: Please refer to the Service Help Desk number on the final page of this manual

SPARE PARTS LIST

SERVICE INFORMATION
For help with the installation, maintenance, and use of your Lincat equipment, please contact our service department:

• UK : 01522 875520

For non-UK customers, please contact your local Lincat dealer.

All service work, other than routine cleaning should be carried out by one of our authorized service agents. We cannot accept responsibility for work carried out by other persons.

To ensure your service inquiry is handled as efficiently as possible, please tell us:

• Brief details of the problem
• All available on the serial plate
  • Product code
  • Type number
  • Serial number

Lincat reserve the right to carry out any work under warranty, given reasonable access to the appliance, during normal working hours, Monday to Friday, 08:30 to 17:00.

GUARANTEE

This unit carries a comprehensive UK mainland 2-year warranty. The guarantee is in addition to and does not diminish your statutory or legal rights.

The guarantee does not cover:

• Accidental damage, misuse or use not in accordance with the manufacturer’s instructions
• Consumable items (such as filters, glass, bulbs, slot toaster elements and door seals.)
• Damage due to incorrect installation, modification, unauthorized service work or damage due to scale, food debris build-up, etc.

The manufacturer disclaims any liability for incidental, or consequential damages. Attendance is based on reasonable access to the appliance to allow the authorized technician to carry out the warranty work.
Service calls to equipment under warranty will be carried out in accordance with the conditions of sale. Unless otherwise specified, a maximum of 15 minutes of administrative time, not spent directly carrying out servicing work, is provided for within the warranty. Any requirement for staff attending the call to spend more than 15 minutes due to administrative requirements, such as on health and safety risk assessments, will be chargeable at the prevailing rate.

FAQ

Q: What should I do if the supply cord is damaged?
A: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>