Ladvow 90 LEDs Solar Lights Outdoor Clip Motion Sensor Security Light Instructions
- June 15, 2024
- Ladvow
Table of Contents
90 LEDs Solar Lights Outdoor Clip Motion Sensor Security Light
Instructions for the Solar Light
Assembly Instructions
- For the first time use or if the light has not been used for a jong time, charge the light by placing it in direct sunlight for 1-2 days. At winter and cloudy day, the lights may not illuminate well due to the soft sunlight.
- Before charging, press the switch button to tum ON the lights.
- With the screws provided, attach the clip light to fence or wail. Recommended height: 1.5-2.5 meters.
- Solar panel: To collect sunlight and charge the battery
- PIR sensor: For motion sensor function
- Switch: ON / OFF
How does these lights work?
(1) Press once – Mode 1: Strong light sensor mode & Dim light mode
(2) Press twice –
Mode 2: Strong light sensor mode
‘3) Press third –
Mode 3: Keep Dim tight mode
Mode 1 : It stays on dim made at night and change to strong light mode
for 15 seconds when dectect motion.
Mode 2: It will turn on strong light about 15 seconds when it detects
motion and tum off automatically.
Mode 3 : It tums on at night and stay dimly all night without motion
sensor.
How to install solar lights?
IMPORTANT: If you use the included transparent hooks to hang the solar
light, please CHECK its adsorption performance at intervals to KEEP SAFE (The
transparent hook ONLY use to stick on glass or tiles. Please remove the
transparent film on the back of the transparent hook before using.)
Replacing Rechargeable Battery?
The Lion Battery +500mah was included in the solar lights,and you do not need to install. If you want to replace the battery after some time using, please follow the below instructions.
- Press the manual switch to the “OFF” position.
- Screw open the back case and remove the old battery then replace it with a new Li-ion Battery rechargeable battery.
