rocstor Y10G013-B1 HDMI Extender User Manual

rocstor Y10G013-B1 HDMI Extender

Important safety notice

1. Ensure all devices are properly grounded to prevent electric shock.
2. Avoid placing the device near radiators, heat registers, or in direct sunlight.
3. Position the device in a well-ventilated area and avoid blocking any ventilation openings.
4. Protect the device from exposure to rain or water to prevent potential failures, fires, or electric shocks.
5. Place the device on a stable, even surface to prevent falls and malfunctions.
6. Never insert metallic objects into the open parts of the device to avoid the risk of electric shock.
7. When using a third-party power supply, verify that it meets the specified requirements for safety and compatibility.
8. Avoid plugging or unplugging Ethernet or HDMI cables while the power is on to prevent potential damage.

Introduction

This TrueReach HDMI Extender HDMI point-to-point extender kit offers zero- latency transmission capabilities. It extends 4K@60Hz HDMI signals up to 60m using CAT6/6A/7 network cables. This kit provides a reliable, ultra-high- definition video transmission solution, making it widely applicable in security monitoring, home theater, broadcasting, training, and various other fields.

Features

• Experience zero-latency transmission for seamless performance.
• Extend 4K@60Hz HDMI signals up to 60m/197ft using Cat6/6A/7 cables.
• Enjoy support for resolutions up to 3840 x 2160@60Hz, with backward compatibility.
• Benefit from HDR10 support for enhanced visual quality.
• Supports EDID passthrough and auto downscaling for optimal signal transmission.
• Equipped with lightning protection, surge protection, and ESD protection for enhanced durability.
• Utilize PoC Network Cable Power Supply, requiring only the TX Power Supply for operation.

Package Contents

Installation Requirements

HDMI cable ≤5m

Cable| CAT6/6A/7，following standard IEEE-568B| CAT6/6A/7≤60m
Display device|

TVs, projectors, etc. with HDMI port

|

HDMI cable ≤5m

Panel Description – Transmitter (TX)

Panel Description – Receiver (RX)

Installation & Connections

How to make a network cable, follow the standard of IEEE-568B

1. white and orange
2. orange
3. white and green
4. blue
5. white and blue
6. green
7. white and brown
8. brown

Connection

Connection instruction

1. Connect the source device to the HDMI IN port of the transmitter with an HDMI cable, and connect the HDMI OUT port of the receiver to the display device with another HDMI cable.
2. Use a Cat6/6A/7 cable to connect the RJ45 port of the transmitter and receiver.
3. Plug the power supply into the devices to get started.

Note:
It is recommended to use a network cable within a length range of 2~60m. If the length of the network cable exceeds or falls short of this range, the transmission of video signals may be affected.

FAQ

Note
Q: The devices are connected correctly, but why is there no image displayed?
A: 1) Please make sure the HDMI cable meets the transmission requirements.(e.g. 4K HDMI cable) 2) Please check and make sure the network cable is connected well.

Q: Why does the display occasionally have a black screen??

1. Check if the length of the cable is within the specified range.
2. Reconnect the network cable and HDMI cables.

Q: Why is the display color abnormal or no sound?

1. Check if the HDMI cables are connected well.
2. Reconnect the network cable.

Technical Parameters

Video
Input interface| 1 x H DMI| 1 x R J 45
Output interface| 1 x R J 45| 1 x H DMI
HDMI Length| ≤5 m| ≤5 m
Ma ximum

transfer ra te

|

18 Gbps

Ma ximum

transmission bandwidth

|

600 MH z

EDID passthrough| Yes

C ompa tibility

| H DMI 2 .0（Deep color, 4 K, H DR, YUV 4 :             4 : 4 ）
H DCP 2 .2

Resolutions

| 480 i@60 H z, 480 p@60 H z, 576 i@50 H z, 576 p@50 H z,

720 p@50 /60 H z, 1080 i@50 /60 H z, 1080 p@50 /60 H z,

3840 x 2160 @24 /25 /30 /50 /60 H z, 4096 x 2160 @24 /25 H z,

1280 x 960, 1280 x 800, 1280 x 768, 1680 x 1050, 1920×1200,

1360 x 768, 1366 x 768, 1600 x 900, 1024 x 768, 800 x 600

Tra nsmission dista nce|

CAT 6 /6 A/7≤60 m

Audio
Input interface| 1 x H DMI| N/A
Output interface| N/A| 1 x H DMI
Audio   formats| LPCM/DT S 5.1/Dolby Digital 5 .1 CH
Power
Power Supply| DC5 V /2A| PoC (Powered by TX)
Power

C onsumption

| TX+RX＜5W
Opera ting Env ironment
Working

tempera ture

| -20℃~60℃

Technical Parameters

Stora ge

tempera ture

| -30℃~70℃
---|---
Humidity| 0 ~90 % RH（No condensation）
Phy sica l Properties
Housing| Metal
Weight| 92g| 91g
C olor| Black
Dimensions| 67.0 (L) 40. 0 (W)23.0(H )mm

Protection

| ESD protection

1 a Contact discharge level 2 (±4 KV ) 1 b Air discharge level 3 (±8 KV )

Implementation of the standard: IEC61000 -4 -2

Lightning protection, Surge protection
C erti ca tions| FCC/CE/RoH S 2 .0

Disclaimer

2024 Rocstr, Inc. Rocstor is a registered trademark of Rocstor, Inc. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.The product name and brand name may be registered trademarks of related manufacturers. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the right to make changes without further notice to a product or system described herein to improve reliability, function or design.

Technical Support / RMA Hours: 9:00 am – 5:00 pm PST Mon – Fri (excluding holidays)

Sales Info Hours: 8:00 am – 5:00 pm PST Mon – Fri (excluding holidays)

• Tell: +1 818-727-7000 (DOM/INTL)
• Fax: +1 818-875-0002
• Email: support@Rocstor.com
• Tell: +1 818-727-7000 (DOM/INTL)
• Fax: +1 818-875-0002
• Email: support@Rocstor.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>