Anko 43437771 Thermal Bluetooth Printer User Manual

Anko 43437771 Thermal Bluetooth Printer

Please read all the information carefully before you use the product and keep the manual for future reference as it contains important information.

Packing list

• 1 pc thermal Bluetooth printer
• 1 pc manual
• 1 pc USB-C cable
• 1 roll of thermal print paper

Product structure

Product Specification

• Product size: 8.5cm8cm4cm
• Built-in Battery: 1200mAh, 3.7V
• Input Rating: 5V/1A
• Compatible with Android 4.0, iOS8.0 or later
• Roll Print Paper: [works well with Anko K: 43-423-804 | T: 69-607-653 (sold separately)]

Power indicator status

Warm Tips:
Please charge it before use. It takes around 2 hours to fully charge. Only use the cable provided to charge the product.

Install Printing Paper

1. Open the paper slot
2. Install the print paper
3. Place the paper face down
4. Close the paper slot (Be sure to leave an extra 1 inch of paper)

Warm Tips:

• When you need to open the paper slot, please try it open in the direction indicated. Do not use brute force to avoid damaging the machine.
• When printing blank or paper jam, please check whether the paper roll is installed backward.
• Correct installation of printing paper, please refer to picture 2 above.
• It needs to open the paper slot to leave the roll paper 1 inch outside before first printing as the above picture shows, then it can print automatically.

Download WalkPrint

How to connect Bluetooth printer

iOS connection method

1. Enable Bluetooth connection on your mobile device, and turn on WIFI or GPS and thermal Bluetooth printer.
2. Open the WalkPrint APP as shown, Select the “Profile” option.
3. Select the “My printer” option and proceed to the next step.
4. In the list of Bluetooth, select the Bluetooth device named ‘YHK-XXXX’, where XXXX can be a combination of digits and letters. Click to connect and the device can be used after successfully connected.

Warm Tips:
It must work with WIFI or GPS, or else it can’t print.

Android connection method

1. Enable Bluetooth connection on your mobile device, turn on WIFI or GPS, and thermal Bluetooth printer
2. Open the WalkPrint APP as shown, Select the “Mine” option.
3. Select the “My printer” option and proceed to the next step.
4. In the list of Bluetooth, select the Bluetooth device named ‘YHK-XXXX’, where XXXX can be a combination of digits and letters. Click to connect and the device can be used after successfully connected

Warm Tips:
It must work with WIFI or GPS, or else it can’t print.

How to Print Image

Apple phone interface as shown in the picture

1. On the Homepage of the APP, select “Print picture” to enter the printing process.
2. After entering “Print picture”, you can click the “Take a photo” option to take a photo directly print or click “Photos” to select from your phone’s photo albums to print.
3. After entering “Picture processing” select “Insert” (top right corner) to the next step.
4. After importing the image, you can adjust the size according to your need, and then select in the upper right corner to proceed next step.
5. After entering the print preview, you can adjust the image density according to your needs (iOS: default medium density is 20 ), and then select to print (upper right corner).
6. The printer will automatically print out images after receiving printing instructions.
7. On the Homepage, you can click to scan the QR and print the content you scanned.

Android phone interface as shown in the picture

1. On the Homepage of the APP, select “Picture print” to enter the printing process
2. After entering “Picture print”, you can click the “Taking pictures” option to take a photo directly print or click “Photo album” to select from your phone’s photo albums to print.
3. After entering “Picture” select “Insert” (top right corner) to the next step.
4. After importing the image, you can adjust the size according to your need, and then select in the upper right corner to proceed next step
5. After entering the Preview, you can adjust the image density according to your needs (Android: default medium density is 25. ), and then select Print (upper right corner).
6. The printer will automatically print out images after receiving printing instructions.
7. On the Homepage, you can click to scan QR and print the content you scanned.

Warm Tips:

1. Please do not open the paper slot during the printing process or just after printing. Let the print head cool down sufficiently before replacing the printing paper.
2. Do not pull out the print paper when the paper slot is closed as this may damage the printer.
3. Please keep the printing paper clean and dry to avoid dust or stains affecting the printing effect.
4. This printer contains a roll of printing paper, so it will make a noise when you shake or move the printer, but this does not affect the quality of the product, so please feel free to use it.
5. If the machine works continuously or spasmodically for a long time, it may pause when the temperature of the motor gets too hot. After resting for some time, it can work again. Duty cycle: printed 7 papers have a rest for 30mins.

How to use the New Note Function

Apple phone interface as shown in the picture

1. Select to enter the New Note interface to print text messages.
2. Edit and input the text or select more content (e.g.: picture/sticker/more) that needs to be printed, and click to the next step (upper right corner).
3. After entering the printing “Print preview”, you can adjust the font density as needed (iOS: default medium density is 20).
4. Adjust the font density and click to print (top right corner).
5. The printer will automatically print out text after receiving printing instructions.

Android phone interface as shown in the picture

1. Select to enter the New Note to print text messages
2. Edit and input the text or select more content (e.g.: picture/sticker/more) that needs to be printed, and click to the next step (upper right corner).
3. After entering the printing interface, you can adjust the font density as needed (Android: default medium density is 25).
4. Adjust the font density and click to print (top right corner).
5. The printer will automatically print out text after receiving printing instructions.

How to Print with Templates/Charge List

Apple phone interface as shown in the picture

1. Enter the “Templates” option.
2. Select a frame from Festive/To-do list/Fun/Frame to print as you need.

Android phone interface as shown in the picture

1. Enter the “Charge list” option
2. Select a frame from Festive/To-do list/Fun/Frame to print as you need.

How to use Labels/Label printing

Apple phone interface

1. Open the Homepage and enter the “Labels” interface
2. Select “Labels” from Home/Life Style/Decoration to print as you need.

Android phone interface

1. Open the Homepage and enter the “Label printing” interface.
2. Select “Label printing” from Home/Lifestyle/Decoration to print as you need.

Other functions

Apple phone interface

Andriod phone interface

Power supply

• The power adapter should use the specified 5V/1A and other types of adapters may conflict with this product.
• Regular charging of the product every month is to ensure the life of the product, while the prolonged period of idle or low battery level may lead to battery life issues.
• Only use the charging cable provided to charge the camera.
• The built-in battery is not removable and replaceable, if damaged should contact service and repair.

Safety instruction

• Keep the appliance away from all hot surfaces and naked flames.
• Always put the appliance on a level, stable, clean, dry surface.
• Protect the appliance from extreme heat and cold, dust, direct sunlight, humidity, and drops or jets of water.
• Do not immerse the appliance in water or other liquids.
• Do not open the housing under any circumstances.
• Do not introduce any objects into the interior of the housing.
• Please wipe the surface stains with a dry cloth. When cleaning this product, ensure that the charger is disconnected.
• Regular checking cables and products in case it’s damaged. If it is damaged, stop using it immediately
• It contains small parts, not suitable for use by a child under the age of three!
• Guardians should keep watch over children while they play.

12 Month Warranty

• Thank you for your purchase.
• Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used under accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
• For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
• We will provide you with your choice of a refund, repair (where possible), or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty.
• This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.
• Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to the respective Customer Service Centre.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Contact for Kmart purchases

• Kmart Australia Ltd.
  C/- Customer Service Centre 690 Springvale Road, Mulgrave Vic 3170

• Customer Service: 1800 124 125

• (Australia) or 0800 945 995

• (New Zealand) or via Customer Help at kmart.com.au.

Contact for Target purchases

• Target Australia Pty Ltd
  C/- Customer Service Centre 2 Kendall Street, Williams Landing, Vic, 3027

• Customer Service: 1300 753 567 or via Customer Help at target.com.au/help/contact-us.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>