SpeedyBee ELRS-2G4-RX Nano 2.4GHz RX ExpressLRS Receiver Instructions
- August 27, 2024
- SpeedyBee
Table of Contents
SpeedyBee ELRS-2G4-RX Nano 2.4GHz RX ExpressLRS Receiver
Dimension
Product Overview
Specifications
| Model | SpeedyBee Nano 2.4GHz RX |
|---|---|
| Name | ExpressLRS Receiver |
| Frequency | 2.4G |
| Antenna | T-antenna (56*82mm, 0.6g) |
| Chip | SX1281+ESP8285 |
| Power | 100mW(Measured around 120mW) |
| Input voltage | 5V |
| Antenna connector | IPEX1 |
| Weight | 0.7 gram(without antenna) |
| Dimension | 10.4mm*18.4mm |
| Default Firmware | SpeedyBee Nano 2.4GHz RX 3.4.3 |
Light indicator
| Double red blinking | binding |
|---|---|
| Slow red blinking | powering up but unlinked, no packages |
received from the transmitter
Solid red| receiver is connected, with the signal received
Fast red flashing
PS:
| Wis ia-Fviaiislatbulrened on, and updating via Wi-Fi
PS
To turn on Wi-Fi, wait for 60 seconds after powering on or long press the button for 3 seconds Quick to cut off the power 3 times, it enters the binding mode
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>