RAIDER RD-HG27 Heat Gun Instruction Manual

Heat gun
USER’S MANUAL
RD-HG27

3 PCS.NOZZLES
1 PCS HANDLE
1 PCS SCRAPER
original instructions’ manual

RD-HG27 Heat Gun

ELEMENTS DEPICTED

1. Output nozzle.

2. Electronic temperature control.

3. Completion breaker – modulating:
   0 – The gun is turned off;
   1 – Inclusion of the first stage;
   2 – Inclusion of the second stage.

4. Handle.

Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools – RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real pleasure. For your convenience has been built and excellent service network of 40 service station across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions will remain available for future reference to all who will use the machine. If you sell it to a new owner “Instructions for Use” must be submitted along with it to enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd, England.

TECHNICAL DATA

1. General instructions for safe operation.
   Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries. Keep these instructions in a safe place.
   For your safety. The tool can only be used safely after the operating instructions have been read and fully complied with.
   1.1. Do not use the tool if damp or if the surroundings are damp.
   1.2. Always check the tool, power cord and plug before use. In the event of damage, repair work should only be carried out by a specialist.
   1.3. Be careful when using the appliance in places where are combus¬tible materials. Do not apply to the same place for a long time.
   1.4. Always ensure the workplace is well ventilated. Never use the tool as hair drier.

2. Safety instructions when using electricity
   2.1. Only connect the power lug when the tool is OFF. Disconnect the power plug after use.
   Always disconnect the power plug before performing any work on the tool.
   2.2. Do not carry the tool by the power cord.
   2.3. Always keep the extension cable well away from the workplace. .
   2.4. Before start-up make sure that the correct voltage is used. The voltage specified on the nameplate must conform to the supply voltage. Tools rated for 230V can also be operated on  220V power supply.
   2.5. The power cord and plug must be in perfect condition.

3. Safety instructions for exploitation.
   3.1. Danger of burns!
   3.2. Do not touch the hot nozzle (1).
   3.3. Wear protective gloves
   3.4. Place on its stand after use and allow cooling before storage. Keep the tool and accessories out of the reach to children.
   3.5. A hot nozzle (1) can cause damage. Do not leave the appliance unattended when in use.
   3.6. Never direct the hot air flow at persons or animals.
   3.7. Danger of fire and explosion! Afire may arise if the appliance is not used with care. Heat may be conducted to combustible materials which are out of sight. Inflammable and poisonous gases may be produced when working with plastics, paints (especially older types of paint), varnishes and similar materials. Never use the tool in the proximity of highly inflammable gases of materials. Do not use in presence of an explosive atmosphere. Do not hold the nozzle outlet too close to the workplace. Only use original accessories. Not all the illustrated or described accessories are included in standard delivery.

4. Start-up.
   4.1. The machine must be switched off when it is connected to the mains.
   4.2. Put the ON/OFF switch (3) at position 1: A lower air stage may be required in certain cases, e.g. to avoid overheating the work piece’s surroundings or to avoid displacing the workpiece if the airflow is too strong.
   4.3. Put the ON/OFF switch (3) at position 2: A higher air stage heats up the workpiece more quickly and enables the hot air gun to be held at a greater distance from the workpiece.
   4.4. Temperature setting. The desired temperature can be set with switch (fig 1). The ideal temperature should first be ascertained by performing a test. You should therefore start with a low temperature setting. The temperatures specified in the illustrated examples of use are recommended values which can vary depending on the properties of the workpiece. The distance between the nozzle and workpiece is dependent on the material to be processed.

5. Instruction for use.
   5.1. A Removing paint/dissolving adhesives. Fit the flat nozzle. Soften the paint using hot air and remove evenly using the spatula. Do not heat the paint for too long since this will burn the paint, making it more difficult to remove. Many adhesives (e.g. stickers) become softer when heated, allowing adhesive bonds to be separated and superfluous adhesive to be removed.
   5.2. Removing paint form windows Glass can break easily. Always use the glass protection nozzle. On profiled surfaces, paint can be removed using a spatula and brushed off using a soft wire brush. 5.3. Shaping plastic tubing. Fit the reflector nozzle. To avoid kinking the tubing, fill the tubing with sand and seal at both ends. Heat the tubing evenly by moving it from side to side.
   5.4. Staining wood. Fit the flat nozzle. Hot air staining gives natural wood a rustic effect. Do not hold the nozzle too close to the wood as this will color the wood unevenly. Carefully grind off any singed wood fibres after-wards using fine emery paper.
   5.5. Shrink fitting. Fit the reducing nozzle. Select a heat-shrinkable sleeve (see Accessories) with a diameter matching that of the workpiece, e.g. cable lug. Heat the heat-shrinkable sleeve evenly.
   5.6. Defrosting water pipes. Do not attempt to defrost PVC piping. Fit the reflector nozzle.
   Always heat the frozen area inwards from the edge to the centre. Note: Water pipes are often difficult to distinguish from gas pipes. Copper pipes are joined using tin and should therefore not be heated above 200°C.

6. Care and maintenance. Always disconnect the plug from the power socket before carrying out any work on the appliance. Always keep the ventilation slots (4) unobstructed and clean.

7. Preservation of the environment.
   In view of environmental power, additional accessories and packaging must be subjected to appropriate processing for reuse of the information contained in these materials. Do not dispose of electric household waste! Under the EU Directive 2002/96/EC on waste electrical and electronic devices and validation and as a national law power which can be used more, must be collected separately and be subjected to appropriate processing for recovery of contained they scrap.

“RAIDER” power tools are designed and manufactured in accordance with regulations in Republic of Bulgaria and standards for compliance with all safety requirements.
Content and scope of the commercial guarantee Commercial guarantee “Euromaster Import-Export” Ltd. for the territory of Bulgaria is 24 months and applies only to obvious and hidden manufacturing defects.
Commercial guarantee is valid for providing warranty card properly filled at the time of purchase of machinery and fiscal cash register receipt or invoice. Warranty card must contain a model, serial number, name, signature and dealer stamp that sold the  machine, signed by the client that is aware of warranty terms and the date of purchase.
Incomplete or altered are void warranty.
For the claim are accepted only cleaned machines in the original box and complete accessories!
The machines should be used only as intended and in accordance with the instructions.
To ensure safe operation it is necessary the client to know well with instructions for use of power tools, safety rules and particular purpose. The machine requires regular cleaning and proper maintenance.
Warranty does not cover:
– Damage of colored coating of the machine;
– Mechanical damage to the body and all external components of the machine, including decorative;
– Eye protectors, fuses cutting tools, rubber plates, fasteners, squares, etc..;
– Power cord and plug;
– Parts and consumables, which are subject to wear caused by use such as grease, oil, brushes, guides, rollers, pads, drive belts, flexible wire shaft, bearings, seals, piston cartridge of tackers and etc..;
– Accessories and supplies such as handles, nozzle, batteries, cases, chargers, drills, cutting discs, chisels knives, chains, sandpaper, limiters, polishing discs, chucks (holders and grips the cutting tool), although for cord and the cord itself on mowers and more.;
– Fuses and bulbs;
– Bush defeated;
– Bearing housing broken nest blocked by broken bearing or bush;
– The integrity of the teeth of gears (broken, worn);
– Broken keys or bolting;
– Damaged (broken, missing) Lock mechanism;
– Depreciation and damage from wear and tear of mechanical components;
– Damage caused by overload or lack of ventilation and insufficient lubrication of moving components;
– Worn bearings or blocked due to overloading, continuous duty or dust;
– Fault in electrical switch or electronic control caused by dust or breakage;
– Damaged box reducer (head) caused by the locking mechanism;
– Damage to rotor or stator, consisting of the bonding between them, due to melting of the insulation caused by continuous overload;
– Damage to rotor or stator caused by overload or impaired ventilation, manifested as discoloration of the collector or windings;
– Occurrence of unusual gap between piston and cylinder as a result of overloading, continuous duty or dust;
– Clamped between piston and cylinder as a result of overloading, continuous duty or dust;
– Damaged centrifugal wheel and brake (discolored) – due to manual lock brakes;
– Overall damage to machinery caused by natural disasters such as fires, floods, earthquakes, etc..;

Void the warranty
Company “Euromaster I/E” Ltd. is not responsible for damage caused by third parties, “electric companies”, damage from external nature, such as electric shocks, non-standard voltage and has the right to refuse warranty service for:
– Inconsistent (or blank) serial number of this machine with a completed warranty card;
– Deleted or missing label of the machine;
– Damage incurred in transport, improper storage and installation of machinery;
– Attempted unauthorized intervention service in unauthorized service center;
– Damage caused due to misuse (non instructions) of the machine by the client or third parties;
– Damage caused by the use of the machine in a different environment than recommended by the manufacturer (Humidity, temperature, ventilation, voltage, dust, etc..)
– Damage caused by the entry of foreign objects into the machine;
– Damage caused by careless handling of the machine;
– Missing protective boxes, disks, back panels and other components that are part of the structure of the instrument and intended to ensure safe and proper operation;
– Power cord of the instrument is extended or replaced by the customer;
The period for repaired in the workshop of the adopted power is within a month.
Workshops are not responsible for tools, unclaimed by their owners one month after the statutory period for repair!
The legal guarantee is required by CPL.

EU DECLARATION OF CONFORMITY

Euromaster Import Export Ltd.
Address: Sofia 1231, Bulgaria, 246 Lomsko shausse Blvd.
Product: Heat Gun
Trademark: RAIDER
Model: RD-HG27
is designed and manufactured in conformity with following Directives:
2014/30/EU of the european parliament and of the council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within cert ain voltage limits and fulfils requirements of the following standards:
EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 +A1:2019 + A14:2019 + A2:2019
EN 60335-2-45:2002/A2:2012
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN IEC 61000-3-11:2019

DECLARATION OF CONFORMITY HEAT GUN RD-HG27
We declare under our sole responsibility that this product is in conformity and accordance with the following standards and regulations:

EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 +A1:2019 + A14:2019 + A2:2019
EN 60335-2-45:2002/A2:2012
EN 62233:2008
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN IEC 61000-3-11:2019
2014/30/ЕС, 2014/35/ЕС
Place&Date of Issue: Sofia, Bulgaria
December 20,, 2023

Explode Drawing of RD-HG27 Heat Gun

www.raider.bg

EUROMASTER IMPORT EXPORT LTD
1231, Sofia, Bulgaria, 246 Lomsko shose Blvd.,
tel.: +359 700 44 155
fax: + 359 2 934 00 90
www.euromasterbg.com; e-mail: info@euromasterbg.com

References

• EUROMASTER Import Export LTD.
• EUROMASTER Import Export LTD.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>