ATMOKO THHP126AB Sonic Electric Toothbrush Instruction Manual

ATMOKO THHP126AB Sonic Electric Toothbrush

SONIC ELECTRIC TOOTHBRUSH
Operating Instructions

CONFIGURATION

1.  Brush Head
2. Multi-function Button
3. Brushing Mode Display
4. Charging Indicator
5. DC Charging Interface
6. USB Charging Cable

BEFORE USE

Please read this user manual carefully before using and save it for future reference.

PRECAUTIONS

Keep the charger away from water. Do not place or store it over or near water contained in a bathtub, washbasin, sink etc. Do not immerse the charger in water or any other liquid. After cleaning, make sure the charger is completely dry before you connect it to the mains.

WARNING

1. This appliance can be used by children and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
2. Children should be supervised to ensure that they do not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
3. Do not use the charger outdoors or near heated surfaces.
4. Do not clean the brush head, toothbrush handle or charger in the dishwasher.
5. This product is intended to clean teeth, gums and tongue only. Do not use it for any other purpose. Stop using the appliance and consult your doctor for support if you experience any discomfort or pain.
6. Stop using a brush head with crushed or bent bristles. Replace the brush head every 3 months or sooner if signs of wear appear
7. If the toothpaste you are using contains peroxide, sodium bicarbonate or other bicarbonate (a common ingredient in whitening toothpaste), be sure to wash the brush head thoroughly with soap and water after each use. This prevents possible cracking of the plastic.
8. If you have had oral or gum surgery in the previous 2 months, consult your dentist before using this appliance.

CHARGING INSTRUCTIONS

1. If the battery is low, the charging indicator will flash 10 times to remind the user that the battery is low and needs to be charged.
2. Connect the appliance to the DC charging port. Connect the USB cable to any suitable power source. Charging begins with the charging indicator lights on (a full charge can be completed in about 4 hours). When fully charged, it will auto- off to prevent overcharging and the charging indicator will light off as reminder.
3. If you use it for the first time or if it is not used for a long time, the indicator may not light up 5 minutes before charging. This is the reason for low battery, which is normal.

BATTERY INDICATOR

BRUSH HEAD REPLACEMENT INSTALLATION

• Installation
  Install the new brush head as shown in the picture, ensure A and B are aligned, and then tighten A and T to align according to the direction of the arrow.

• Take off
  Screw the brush head in the direction of the arrow until A and B are aligned, and then remove in the direction of D.

BRUSHING METHOD

1. Wet the bristles and dab a small amount of toothpaste
2. Place the bristles on the teeth and keep a slight angle to the gum line. (Figure 1)
3. Turn on the electric toothbrush. If you need to change the gear position, you need to press the power button continuously to change the gear after turning the device on (Tip: If you long press the button over 3S, the device will turn off). The product has a memory function of gear position, if you require the last used mode, you do not need to select the mode again. (5 Modes Optional).
   • Whitening: Recommended for removing stains from the surface for cleaning and whitening purpose.
   • Cleaning: Standard daily cleaning mode.
   • Sensitive: Gentle vibrations. Recommended for gum recession, braces, sensitive gums or people who experiences the sonic electric toothbrush for the first time. d. Polishing: Increase tooth gloss and help remove stains.
   •  Massage: For people with sensitive gums, this is a desired mode to massage the gums.
4. Apply light pressure and gently move the brush head back and forth over the teeth
5. To maximize cleaning effect, divide your mouth into four parts. Starting from the first quarter, each segment should be brushed for 30 seconds. The brushing action is designed to pause every 30 seconds, instructing you to move to the next section. After 2 minutes of use, the toothbrush will automatically stop. (Image 3)

TOOTHBRUSH CLEANING

1. Rinse the brush head and bristles with mild water flow and shake it to remove excess water
2. Remove the brush head, wash the neck and handle of the toothbrush with water or wipe the surface of the toothbrush with a clean damp cloth.
3. Do not clean it in the dishwasher.

CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>