CLIPSAL 41ECSFWMZ-VW Iconic Connected AC Fan Speed Controller User Guide

CLIPSAL 41ECSFWMZ-VW Iconic Connected AC Fan Speed Controller

Specifications:

• Operating Voltage: 220 – 240 V a.c. , 50 Hz
• Load rating: Total max.150 W
• Number of Fans: Max. 2
• Switching Technique: Relay
• Protection:
  • Over Temperature: Yes
  • Short circuit: No
  • Over-current fuse: No
  • Thermal protection: Yes
• LED Indicator: Yes
• Multi-gang plate capacity: Max 3 primary fan
  controllers per plate

Product Usage Instructions

Installing the Product:

1. Fitting the fan controller to the grid
2. Mounting the grid
3. Installing the skin
4. Removing the skin

Note: The protection class of the fan controller is IP20. Install only indoors or in sufficiently protected housing.

Reading the Full Device Guide Online:
Scan the QR code and choose your language for complete information about the device, including operation, configuration, and using the product with a Wiser system.

Technical Data:
You can find detailed technical data in the specifications section above.

Frequently Asked Questions (FAQ):

• Q: Can I control more than two fans with this fan speed controller?
  A: No, the maximum number of fans that can be controlled with this product is two.

• Q: Is it safe to install the fan controller outdoors?
  A: No, the fan controller is rated IP20 and should only be installed indoors or in protected housing.

• Q: What is the warranty period for this product?
  A: The product comes with a 2-year warranty. For more information, refer to the warranty links provided in the manual.

SAFETY WARNINGS

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• It is illegal for persons other than an appropriately licensed electrical contractors or other persons authorised by legislation to work on the fixed wiring of any electrical installation.
• To comply with all safety standards, the device must be used only for the purpose described in this instruction and must be installed in accordance with the wiring rules and regulation in the location where it is installed.
• Lock out and tag the input circuit before accessing the wiring connections.
• The Locking Bar on the grids must be set to the Closed position to ensure that the device cannot be removed during normal operation.
• There are no user serviceable parts inside the device.

Failure to follow these instructions will result in death or serious injury.

CAUTION
EQUIPMENT DAMAGE HAZARD

• Install the device according to instructions in this document.
• Pay attention to the specifications and wiring diagrams related to the installation.
• Do not use the device for any other purpose than specified in this instruction.
• Dropping the device may damage the internal components. Check that the device operates after being dropped or if physical damage is shown.

Failure to follow these instructions can result in injury or equipment damage.

NOTICE
EQUIPMENT DAMAGE HAZARD (LOAD AND OPERATION)

• Operation of the device at elevated temperatures or voltages outside of specification (240 V a.c. and 25 °C) may cause the over-temperature protection circuitry to operate.
• Reduce the size of the connected load or use a different brand of fan to prevent recurrence.
• Do not operate the product in extreme conditions.

Failure to follow these instructions can result in equipment damage.

Package Contents

• A. Fan controller
• B. Iconic Push-button assembly (vivid white)

NOTE: Other push-button assemblies in different colors are not part of the package. They need to be purchased separately.

Product Details

• A. Push-button
• B. Speed indicating LEDs

Wiring diagramm and electrical connections

NOTICE
EQUIPMENT DAMAGE (LOAD AND OPERATION)

• If you connect more than one fan to the fan controller, you must install an additional capacitor for each additional fan.
• The speed response of individual fans may vary.

Failure to follow these instructions can result in equipment damage.

Installing the product

NOTE: The protection class of the fan controller is IP20. Install only indoors or in a sufficiently protected housing.

1. Fitting the fan controller to the grid
2. Mounting the grid
3. Installing the skin
4. Removing the skin

Reading the full device guide online

Scan the QR code and choose your language for complete information about the device, including operation, configuration and using the product with a Wiser system.

Technical data

• Operating Voltage: 220 – 240 V a.c. , 50 Hz
• Load rating: Total max.150 W
• Number of Fans: Max. 2
• Switching Technique: Relay
• Protection
  • Over Temperature: Yes
  • Short circuit: No
  • Over-current fuse: No
  • Thermal protection: Yes
• LED Indicator: Yes
• Multi-gang plate capacity: Max 3 primary fan controllers per plate
• Compatible plate ranges: Iconic, Iconic Styl, Iconic Essence, Pro Series
• Mounting Centres: 84 mm pattern plate
• Compliance
  • Safety: AS/NZS 60669.2.1
  • EMC: AS/NZS 60669.2.1
  • RF: AS/NZS 4268, AS 2772.2
• Environmental Rating: IP20
• Ambient operating
  • Humidity: 5%–90% RH, non-condensing
  • Temperature: -10 to +50 °C
• 41ECSFWMZ-VW
  • Operating frequency: 2.405 GHz to 2.48 GHz
  • Max. radio-frequency power transmitted: < 10 mW
  • Certification: Zigbee 3.0, RCM
• 41ECSFWM-VW
  • Communication protocol: Bluetooth® low energy

Trademarks

• Wiser™ is a trademark and the property of Schneider Electric SE, its subsidiaries and affiliated companies.
• Zigbee® is a registered trademark of the Connectivity Standards Alliance.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc Other brands and registered trademarks are properties of their relevant owners.

Customer care
Warranty information
We warrant this product for 2 years. See the Warranty links below.

Schneider Electric (Australia) Pty Ltd
33-37 Port Wakefield Road, Gepps Cross SA 5094
Customer Care: 13 73 28
Email: customercare.au@se.com
Warranty:
https://www.clipsal.com/warranty
www.clipsal.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>