CLIPSAL Electronics Motion Sensors Wiring Occupancy User Manual
- June 7, 2024
- CLIPSAL
Table of Contents
Electronics Motion Sensors Wiring Occupancy
Clipsal Motion and Occupancy Sensors
The sixth sense in security and energy management.
clipsal.com/sensors
2
Introduction
Motion and occupancy sensors offer benefits in security, energy management,
hospitality and true `hands-free’ convenience. A motion sensor is a lighting
control device that detects movement, such as a person walking into a space.
Once detection occurs loads are automatically switched on and are then
switched off after a preset amount of time. The Clipsal Infrascan® range is
the benchmark and preferred choice for motion sensors due to their reliability
and simplicity of installation and operation. Occupancy sensors detect the
occupancy of a space, utilising highly accurate detection technology.
Occupancy sensors detect fine motions such as the typing of a keyboard, which
trigger the load of the sensor. Clipsal offers a wide range of motion and
occupancy sensors for use in residential and commercial applications. This
range encompasses standalone sensors and system integrated sensors to provide
diverse opportunities to address all residential and commercial energy
management needs. Different technologies including Passive Infrared (PIR),
Ultrasonic (US) and Microwave provide appropriate solutions for different
environments.
clipsal.com/sensors
Contents
Infrascan® Sensors
750 Series Outdoor
4
751 Series Corner Mount
5
753 Series 360° Flush Mount
6
753 SSR 360° Surface Mount
8
Commercial Sensors
752IR2RC Wide Range
9
752HF2RC Microwave
10
752DALI Series DALI Output
11
752/CD Series Dual Tech
12
C-Bus® Sensors
5750 Series Outdoor
14
5751 Series Corner Mount
15
5753 Series 360° Flush Mount
16
5754 Series 360° Surface Mount
17
DALIcontrol Sensors
DCDALMS360 360° Flush Mount
18
DCDAL31MOD 30 Series Mechanism
19
4
Infrascan® Sensors
750WP Outdoor Sensor, 2 Wire
750WPR Outdoor Sensor, 3 Wire
The 750 Series is Clipsal’s flagship sensor, well known for its robustness, ease of install and simple functionality. The Infrascan provides the dual benefits of safety and security. Designed for Australia’s harsh conditions with a UV protected enclosure and an IP66 rating, the sensor is completely dust and waterproof allowing for installation in outdoor areas. Ideal for garages or carparks.
Features
· 110° field of view, covering up to 18 metres from unit · PIR sensor
technology for precise outdoor motion detection · Flat, multi segmented lens
divides field of view’ into 48 zones reduces number of
dead zones’ · Wall or ceiling mounted for flexibility in
installation positioning · Prewired 2 and 3 core lead for reduced installation
time and variety
of cabling termination methods · 3 wire model has a highly robust internal
relay for high load ratings
longevity and flexible applications including LED lighting · Suitable for
residential and commercial applications
Specifications
750WP
750WPR
Supply
AC 200 265V, 50Hz
Output
5A
10A
Time Setting
5 seconds to 20 minutes
IP Rating
IP66
Wiring
2 Wire
3 Wire
See data sheet on Clipsal.com for full specifications.
clipsal.com/sensors
Scanned Area – Horizontal Plane
8.5 metres approx.
Detection Area 6×6 metre
90º Viewing Angle 90º
2.4m
Scanned Area Veticle Plane
Floor
751 Corner Mount Sensor, 2 Wire
751R Corner Mount Sensor, 3 Wire
The 751 Series provides 90° of detection, designed for installation in corners. With precise PIR detection and robust design, the sensor is ideal for applications in bathrooms, walk in robes and home offices.
Features
· 90° viewing angle from sensor head, detection range 6 x 6 metres, at 2.3
metre mounting height
· PIR sensor technology for precise indoor motion detection · Designed for
room corner mounting · Sensor rotatable by 120° easy adjusting of sensing
zone · Simple installation for faster fit off · Two wiring types suitable for
a variety of applications three wire units
can be paralleled to control a single load from multiple sensors · Suitable
for residential and commercial applications
Specifications
Supply Output Time Setting
751
751R
AC 200 265V, 50Hz
2A
10A
5 seconds to 20 minutes
IP Rating
Wiring
2 Wire
See data sheet on Clipsal.com for full specifications.
IP20
3 Wire
6
753 360° Flush Mount Sensor, 2 Wire
753R 360° Flush Mount Sensor, 3 Wire
The 753 Series utilises an advanced quad element sensor array to allow instantaneous detection. Appearance wise, the 753 is a slimline, fully recessed mounting facility, making it one of the most sleek and unobtrusive 360° sensors available. Ideal for applications in bathrooms, walk in robes, pantries and office areas.
Features
· 360° field of view, with detection range 10 metre diameter, at 2.4 metre
mounting height
· PIR sensor technology for precise indoor motion detection · Unobtrusive
flush mount design · Advanced quad element sensor · Recessed ceiling mounted ·
Robust design and easy to install with large wiring terminals · 753R has a
high 10A load rating for use with a variety of
applications including LED lighting · Suitable for residential and commercial
applications
Specifications
753
753R
Supply
AC 200 265V, 50Hz
Output
2A
10A
Time Setting
5 seconds to 20 minutes
IP Rating
IP20
Wiring
2 Wire
3 Wire
See data sheet on Clipsal.com for full specifications.
Top View at 2.4m Mounting Height 5m 2.5m 0m 2.5m 5m
v
clipsal.com/sensors
2,5 m
7 m
4 m
2 m
0 m
2 m
4 m
7 m
2,5 m
7 m
4 m
2 m
0 m
2 m
4 m
7 m
753CF1 360° Flush Mount Sensor, 1 Output
753CF2 360° Flush Mount Sensor, 2 Outputs
The 360° PIR Sensor is low profile, allowing for an unobtrusive addition to the room, while maximising convenience and energy saving. With its simple installation and flush mounting, the sensor is ideal to address basic sensor requirements, including toilets, walk in robes, pantries and small offices.
Features
· 360° field of view, with detection range of 3.5 metre radius, and up to 7
metre if titled with gimble
· Small, attractive flush sensor with unobtrusive design · Gimbled head for
range adjustment and easy access to trimpots · Two models available – Single
load (for lighting) and dual load
(for lighting and HVAC) · Quick and easy settings for lux level and time on
both outputs · Consists of sensor and power box to allow for low ceiling
spaces · Lens mask provided to shield unwanted detection zones · Suitable for
residential and small commercial applications
Specifications
Supply Output Ratings
753CF1
753CF2
AC 220-240 V, 50/60 Hz
LED: max. 100 W Incandescent lamps:
max. 1000 W
Output 1: (Switched Active) LED lamps: 100 W
Incandescent lamps 240V a.c.: 2000 W
Time Setting
30s to 30 min
Output 2: (Voltage Free Relay) AC 250 V, 5 A resistive Motor: 100 W
Time 1 (Output 1): 30s to 30 min
Time 2 (Output 2): 10s to 15 min
IP Rating
IP20
See data sheet on Clipsal.com for full specifications.
8
753SSR 360° Surface Mount Sensor
The 753SSR provides high resolution PIR detection over a wide area of 24 metres diameter. Equipped with four pyro sensors, the sensor is capable of detecting fine movements, such as a finger moving, within its inner diameter as well as larger movements in its outer detection area. Ideal for indoor or areas such as open area living, offices, car parks, garages, carports or outside spaces.
Features
· 360° field of view, with detection range 24 metre diameter · Advanced
resolution with four PIR pyro sensors for
detection of small movements · Ceiling surface mounted with inbuilt wiring box
· Inbuilt 4 hour manual override ON feature · 1416 switching zones and 10
detection levels for precise detection · Lens mask provided to shield unwanted
detection zones
Specifications
753SSR
Supply
240V 50Hz
Output
ELV: 1000W Max Fluoro: 1000W Max LED: 8x LED drivers Max Incandescent / 240V halogen: 2400W Max
Time Setting
5 seconds 15 minutes Pulse Mode (approx. 2 seconds)
IP Rating
IP54
See data sheet on Clipsal.com for full specifications.
clipsal.com/sensors
Side View Top View
Major Motion Minor Motion
360 o
Commercial Sensors
752IR2RC Wide Range Sensor
The 752IR2RC is a wide range ceiling mounted sensor with dual output for lighting and HVAC control. The sensor detects movement over 30 metres, providing high sensitivity within the minor and major motion zones. Ideal for use in large open areas, lobbies, corridors, offices, libraries, conference rooms and reception areas.
Features
· 360° field of view, with detection range 30 metre diameter · PIR sensor
technology for precise indoor detection · Switching of two outputs (e.g. light
and HVAC)
with two independent adjustable timers · External triggering via pushbutton ·
Configurable timer options including pulse output to trigger external relays ·
Optional wireless remote control (752RC/IR) for ease of configuration ·
Suitable for flush or surface mounting with both bases included
Specifications
Supply Output
752IR2RC
AC 220240 V, 50/60 Hz
Output 1: (Switched Active): LED lamps: 100 W
Incandescent lamps: 2000 W
Output 2: (Voltage Free Relay): AC 250 V, 5 A resistive Motor: 100 W
Time Setting
Time 1 (output 1): from approx. 10 s to approx. 30 min Time 2 (output 2): from approx. 10 s to approx. 60 min
IP Rating
IP40 (flush mount) or IP42 (surface mount)
See data sheet on Clipsal.com for full specifications.
10
2.5 – 5 m
752HF2RC Microwave Sensor
The 752HF2RC is an occupancy detector with an integrated High Frequency
Doppler Effect Sensor providing high sensitivity to small motion, suitable for
many commercial applications. It allows excellent detection ability for
heights reaching 10 metres and through non-metallic materials. Ideal for high
ceilings, foyers, above ceiling spaces, factory high bay applications and
areas where detection without direct view to movement is needed and where
temperature influences might cause false detection with PIR sensors, such as
data centres.
Features
· High frequency technology for advanced occupancy detection · Strong
detection at significant heights 10 metre diameter
at height of 10 metres · High performance sensing dust, temperature, light,
airflow, sound or vibration will not affect performance · Sensor penetrates
nonmetallic materials (e.g. wood, glass, thin brick)
can detect motion in areas where direct view is unavailable · Detection range
14 metre diameter, at an installation height of 2.5 metres · Optional wireless
remote control (752RC/HF) for ease of configuration · 360° field of view ·
Integrated light level sensor – set desired thresholds for switching on the
light · Suitable for flush or surface mounting with both bases included
Specifications
Supply Output
752HF2RC
AC 220240 V, 50/60 Hz
Output 1: (Switched Active): LED lamps: 100 W
Incandescent lamps: 2000 W
Output 2: (Voltage Free Relay): AC 250 V, 5 A resistive Motor: 100 W
Time Setting
Time 1 (output 1): 10s to 30 min Time 2 (output 2): 10s to 60 min
IP Rating
IP40 (flush mount) or IP42 (surface mount)
See data sheet on Clipsal.com for full specifications.
5.5 – 10m
clipsal.com/sensors
Side View Top View
Major Motion Minor Motion
360 o
752DALIRC DALI Output Master Sensor 752DALIS DALI Output Slave Sensor
The 240V powered stand-alone DALI Output Sensors provide occupancy detection
with multi-functional capabilities including switching on and off and dimming
of end point DALI fittings, offering comfort and convenience as well as energy
saving benefits. The DALI Slave PIR Sensor provides detection range extension
for the Master Sensor. Ideal for lobbies, class rooms, offices and conference
rooms.
Features
· PIR sensor technology for precise motion and occupancy detection · 360°
field of view, with detection range of 8 metre diameter · Switching and
dimming of DALI electronic ballasts · Daylight harvesting for constant
brightness management · 2 independent DALI broadcast outputs on the Master
Sensor · Detection range extended by up to 10 Slave Sensors · Input for
external switches for manual override · Optional wireless remote control
(752RC/DALI) for easy configuration · Suitable for flush or surface mounting
with both bases included
Specifications
752DALIRC
752DALIS
Supply
AC 220240V, 50/60Hz
Output
DA1 and DA2 (per zone): Max. 25 DALI ballasts 16V d.c. , 50mA max
Managed by Master
Time Setting
1 min to 60 min
Managed by Master
Standby Mode
Options:
N/A
Output level:10%, 20%,
30% or OFF
Time settings: 5 ,10, 15 min or infinity.
IP Rating
IP40 (Flush mount) or IP42 (surface mount)
See data sheet on Clipsal.com for full specifications.
12
752CD1RC Dual Tech Sensor, 1 Output
752CD2RC Dual Tech Sensor, 2 Output
The Dual Tech Occupancy Sensors utilise PIR and Ultrasonic technologies to provide highly sensitive yet accurate detection. The sensors detect minor and major movement, while also screening out nuisance or false triggering. Providing logic functions to enable optimal detection performance through the entire coverage area, dual technology sensors are best equipped to deal with commercial applications such as open office areas, conference rooms or class rooms.
Features
· Highly effective detection combining Ultrasonic technology (for high
sensitivity of motion) with PIR (to combat false triggering)
· 360° field of view, with two detection zones · Detects minor movements such
as typing or reading · 4 detection options: PIR + US, PIR only, US only, PIR
or US · Optional wireless remote control (752RC/CD) for easy configuration ·
Single channel model for control of lighting and dual channel model
for simultaneous control of lighting and HVAC · Suitable for flush or surface
mounting with both bases included
Specifications
Supply Output
752/CD1RC
752/CD2RC
AC 240V~ ±10% 50/60Hz
(Switched Active): LED lamps: 300W Incandescent: 2000 W
Output 1 (Switched Active): LED lamps: 600W
Incandescent: 2300 W
Output 2 (Voltage Free Relay): 5A for < 250V AC resistive, 5A for < 30V DC
Time Setting
5 sec – 30 min
Time 1 (Output 1): 5 sec 30 min
Time 2 (Output 2): 10 sec 60 min
IP Rating
IP20
See data sheet on Clipsal.com for full specifications.
PIR Minor Motion PIR Major Motion Ultrasonic Minor Motion Ultrasonic Major Motion
C-Bus
C-Bus is a micro-processor controlled wiring system for lighting control and
energy management. In buildings, it allows facility managers and integrators
to configure an area or zone as required; such as automatically switching
lights off or adjusting light intensity in accordance with natural light
levels, plus integrate with the BMS for building wide control. In residential
environments, C-Bus offers a total luxury package, controlling multiple
devices while integrating with 3rd party systems to achieve a customised
solution for the smart home. With C-Bus, you can achieve an environment of
comfort, convenience, security and energy efficiency in any of the following
applications:
Residential
· Homes · Apartments
Commercial
· Office · Warehouse and Industrial · Education and Health · Sporting
Facilities · Hotels and Accommodation · Retail · Hospitality and Entertainment
Adding sensors make an environment smarter and more efficient. C-Bus sensors
allow elements such as presence, occupancy and vacancy to be detected and in
turn, control loads or functions plus adjust lighting levels to alter the
environment as required.
clipsal.com/sensors
14
5750WPL-GY C-Bus Outdoor Sensor
Advanced C-Bus PIR sensor suitable for both outdoor commercial and residential applications within a C-Bus system solution.
Features
· 110° field of view with four detection zones long range 18 metres,
intermediate range 8 metres, short range 4 metres and ultra short range 1.2
metres at 2.4 metres mounting height
· PIR sensor technology for precise motion detection · Wall or ceiling mounted
for flexibility in installation positioning · Inbuilt light level sensor
supporting a Sunset Switch program · Capable of controlling up to 4 C-Bus
group addresses · Dual element detectors minimise false triggering · Features
light threshold and PIR sensitivity adjustments on the unit · Programmable
using C-Bus Toolkit commissioning software, offering
advanced system features
Specifications
Supply Output Time Setting IP Rating
5750WPL-GY Powered by C-Bus
C-Bus 1 second to 18 hours
IP66
Ultra short zones nominal range 1.2m Short range zones nominal range 4m
Intermediate zones nominal range 8m Long zones nominal range 18m
Head vertical
Optimum “approach path”
Fields of view top elevation Fields of view side elevation
clipsal.com/sensors
8.5m approx.6 Ceiling
m x 6m approx.
5751L-WE C-Bus Corner Mount Sensor
Advanced corner mount C-Bus PIR sensor suitable for both commercial and
residential applications within a C-Bus system solution.
Features
· 90° field of view, with detection range 6 x 6 metre, at 2.4 metre mounting
height · PIR sensor technology for presence and occupancy detection · Surface
mount for corner room installation · Inbuilt light level sensor supporting a
Sunset Switch program · Capable of controlling up to 4 C-Bus group addresses ·
Dual element detectors minimise false triggering · Features light threshold
and PIR sensitivity adjustments on the unit · Programmable using C-Bus Toolkit
commissioning software, offering
advanced system features
Specifications
Supply Output Time Setting IP Rating
5751L-WE Powered by C-Bus
C-Bus 1 second to 18 hours Suitable for indoor use
2.4m
Floor
16
5753L C-Bus 360° Flush Mount Sensor
5753PEIRL C-Bus 360° Flush Mount, Multi Sensor
Advanced C-Bus sensor including PIR sensor, Light Level sensor and an Infrared receiver (5753PEIRL only). Suitable for both commercial and residential applications within a C-Bus system solution.
Features
· 360° field of view, with detection range 15 metre diameter, at 2.4 metre
mounting height
· PIR sensor technology for precise motion and occupancy detection · Light
level sensor for light level maintenance (daylight harvesting) · Flush mount
for unobtrusive appearance · Features a Sunset Switch program · Capable of
controlling up to 8 C-Bus group addresses or 8 C-Bus scenes · Supports
corridor linking for commercial building applications · Dual element detectors
minimise false triggering · Programmable using C-Bus Toolkit commissioning
software, offering
advanced system features
Additional features of 5753PIERL
· IR receiver for C-Bus control from a handheld remote
Specifications
Supply Output Time Setting IP Rating
5753L
5753PEIRL
Powered by C-Bus
C-Bus
1 second to 18 hours
Suitable for indoor use
PIR Area of Detection (Side View)
Side View Ceiling
3.7m (12ft)
2.4m (8ft)
12m 10m (39ft) (33ft)
6m (20ft)
2m 0m 2m (7ft) (0ft) (7ft)
8m (26ft) 6m (20ft) 4m (13ft) 2m (7ft) 0m (0ft) 2m (7ft) 4m (13ft) 6m (20ft) 8m (26ft)
2.7m 3.0m (9ft) (10ft)
6m (20ft)
10m 12m (33ft) (39ft)
clipsal.com/sensors
PIR Area of Detection (Top View)
PIR Area of Detection (Side View) 30°
7.6m (25ft) 9.7m (32ft)
Minor motion 7.6m (25ft)
Major motion 9.7m (32ft)
2.7m (9ft)
5754ODPE C-Bus 360° Surface Mount Sensor
5754ODPEIR C-Bus 360° Surface Mount, Multi Sensor
Advanced C-Bus sensor including PIR sensor, Light Level sensor and an Infrared receiver (5754ODPEIR only). Suitable for both commercial and residential applications within a C-Bus system solution.
Features
· 360° field of view, with detection range of 10 metre diameter, at 2.4 metre
mounting height
· PIR sensor technology for precise indoor motion and occupancy detection ·
Light level sensor for light level maintenance (daylight harvesting) · Surface
mount for quick mounting onto solid surface such as
masonary/slab or wood · Low-profile surface mount design extends only 33mm
from the
mounting surface · Features a Sunset Switch program · Capable of controlling
up to 8 C-Bus group addresses or 8 C-Bus scenes · Supports corridor linking
for commercial building applications · Dual element detectors minimise false
triggering · Features light threshold & PIR sensitivity adjustments on the
unit · Programmable using C-Bus Toolkit commissioning software, offering
advanced system features
Additional features of 5754ODPEIR
· IR receiver for C-Bus control from a handheld remote
Specifications
Supply Output Time Setting IP Rating
5754ODPE
5754ODPEIR
Powered by C-Bus
C-Bus
1 second to 18 hours
Suitable for indoor use
18
DALIcontrol
DALIcontrol is a lighting control system built on the DALI (Digital
Addressable Lighting Interface) international standard providing a single
interface for all electronic control gear (light sources) and electronic
control devices (lighting controllers) and is perfectly tailored to control
office lighting in multi-storey buildings. The DALIcontrol Native, Simple and
Advanced solutions provide the ability to scale a lighting system from a room,
to a floor, to a complete building and beyond. Each DALIcontrol system can
utilise a mixture of DALI devices which can include DALIcontrol switches and
sensors plus DALIcontrol Line Controllers to control lighting and exit and
emergency fittings on DALI lines.
DALIcontrol sensors are an important component for intelligent lighting
control within a DALI system and make an environment smarter and more
efficient. DALIcontrol sensors allow elements such as presence, occupancy and
vacancy to be detected and in turn, control loads or functions plus adjust
lighting levels to alter the environment as required.
DCDALMS360 DALIcontrol 360° Flush Mount Motion Sensor
Advanced DALIcontrol motion sensor suitable for commercial lighting control applications within a DALI system solution.
Features
· 360° field of view, with detection range of 10 metre diameter, at 2.4 metre
mounting height
· PIR sensor technology for precise motion and occupancy detection · Light
level sensor for light level maintenance (daylight harvesting) · Flush mount
for unobtrusive addition to room · Quickly mounts onto ceiling tiles or cavity
ceilings · Supports linked control of PIR or Lux sensing for the same targets
· Configurable on and off actions · Up to 4 switchable profiles · Features
light threshold and PIR sensitivity adjustments on the unit · Programmable
using DALIBuildings commissioning software, offering
advanced system features
Specifications
Supply Output Time Setting IP Rating
DCDALMS360 Powered by DALI
DALI 1 second to 255 minutes Suitable for indoor use
Top View at 2.4m Mounting Height
Side View Ceiling
3.7m (12ft)
2.4m (8ft)
6m (26ft) 4m (20ft) 2m (13ft) 0m (0ft) 2m (7ft) 4m (13ft) 6m (20ft)
2.7m 3.0m (9ft) (10ft)
6m
4m
2m
0m
2m
4m
6m
(20ft)
(33ft)
(7ft)
(0ft)
(7ft)
(13ft)
(20ft)
clipsal.com/sensors
Top View at 2.7m Mounting Height
2.5m (8ft) 1.5m (5ft) 0m (0ft) 1.5m (5ft) 2.5m (8ft)
Ceiling
2.7m
2.5m 1.5m 0m 1.5m 2.5m (8ft) (5ft) (0ft) (5ft) (8ft)
DCDAL31MOD DALIcontrol 30 Series Mechanism Motion Sensor
Advanced DALIcontrol motion sensor suitable for commercial lighting control applications within a DALI system solution.
Features
· 120° field of view, with detection range 5 metre diameter, at 2.7 metre
mounting height
· PIR sensor technology for precise motion and occupancy detection · 30M
format suits Clipsal gridplate or DALIcontrol housing fitment · Detection
range typically 5 metres from the lens, when installed in wall · Configurable
on and off actions · Up to 4 switchable profiles · Programmable using
DALIBuildings commissioning software,
offering advanced system features
Specifications
Supply Output Time Setting IP Rating
DCDAL31MOD Powered by DALI
DALI 1 second to 255 minutes Suitable for indoor use
5m Top View
5m (16ft) 2.7m (9ft)
0m (0ft) 2.7m (9ft)
Wall
5m (16ft)
Side View
5m Ceiling
Floor
2.7m (9ft) 1.6m (5ft) 0m (0ft)
Wall
20
Clipsal Lighting and Sensors Solutions
Sensor technology has always been a great way to improve performance and
lifespan of lighting in any installation, as well as reducing running costs by
only having the light on when it’s needed. When you combine this with
Clipsal’s range of energy efficient LED lighting you start to create a
solution that can truly bring maximum benefits into your building. As with our
large range of sensor products, our broad range of luminaries provides an
option for almost every one of your lighting needs. With products suited for
residential, commercial and industrial applications we take care to ensure our
offers can withstand the large inrush currents and harsh running conditions
LEDs can create. Testing both sensor and luminaire together gives you every
assurance that when you put the combination into your installation you can
rest easy it is Clipsal tested and backed to perform.
Floodlighting
Whether it be lighting a large surrounding area of a commercial building or
subtly illuminating the outdoor living space at home, Clipsal has a range of
LED Floodlights to suit your needs. From our high powered FLH series that can
offer security lighting in public places to our sleek and low profile FLS
series with its softer light output that is more suitable for the home
alfresco area, our Floodlights allow you to continue to live even when the sun
goes down. These lights increase in functionality when you add one of our
outdoor senor products like a 750WPR, with its leading range and sensing
technology. This means the lights are on only when you are in the area and
wait till you leave it before turning them off.
FLH Series
FLS Series
clipsal.com/sensors
Exterior Batten Range
Excellent for commercial and residential applications, schools, car parks,
security purposes, public buildings, carports and garages these fittings are
manufactured with a robust construction that shields the high output LED
technology to maintain maximum light output and lamp life. Designed to provide
high levels of illumination under adverse conditions where reliable
performance is crucial, the polycarbonate diffuser provides not only
resistance from external impact but an even distribution of light.
In commercial security installations, pairing these fittings with our 5754ODPE
allows the control of these luminaires do be performed automatically as the
natural light fades and artificial illuminance is required
TUFF Series
TPWP Series
Downlights
LED Downlights are suitable for multiple illumination applications from
residential to commercial buildings. The slightly recessed frosted diffuser
ensures reduced glare and soft glow output. Warmer light output is perfect for
areas that experience high traffic and entertainment, while the cooler output
versions are great for working environments that require maximum illumination.
The TPDL1C1 Series comes with an integrated colour temperature selector switch
enables the choice of 3000K, 4000K and 6000K outputs to ensure the perfect
illumination to suit your needs.
Adding and internal sensor with the appropriate sensing range and direction
allows for these lights to be activated when you approach from a certain
direction or only when you’re standing directly underneath. Selecting the
right one is up to you.
TPDL1C1 Series
TPDL300 Series
22
Standalone 240V Selection Guide
PIR Motion Sensor Surface Mount
Cat Number
753SSR-WE
Standalone or System Sensor
Standalone
Supply Voltage
240v, 50Hz
Design
3-Wire
Special Feature
High Sensitivity
PIR Motion Sensor Flush Mount
753R-WE
753-WE
Standalone
240V, 50Hz
3-Wire
2-Wire
Unobstrusive robust design
PIR Motion Sensor Corner Mount
751R-WE
751-WE
Standalone
240V, 50Hz
3-Wire
2-Wire
Room corner installation
Sensing Type Technology IP Rating Mounting Detection Angle Detection Range Timer Setting
PIR (4 pyro sensors), Precise Motion PIR, Motion detection detection (fine movements)
IP54
IP20
Ceiling, surface 360° Ø 24m at H = 2.5m 5 sec 15 min Pulse mode
Recessed Ceiling 360° Ø 10m at H = 2.4m 5 sec 20 min
PIR, Motion detection IP20 Corner, ceiling, surface 90° 6 x 6 m 5 sec 20 min
PIR Motion Sensor Outdoor
750WPR-GY 750WP-GY
Standalone
240V, 50Hz
3-Wire
2-Wire
VEET approved, high robustness
PIR, Motion detection IP66 Wall, Ceiling 110° 18 m 5 sec 20 min
Light Level Sensor
YES
Material Penetration
NO
Inbuilt Manual Override
YES (load on for 4 hrs)
IR Remote Control
NO
Connectivity
NO
(Voltage free output for C-Bus
or HRC connection)
Output Ratings
240V~10A
Warranty Suggested Application
3 year Car parks, garages
With Typical Clipsal Lighting Load TPWPLED2 – Battern, LED weatherproof
YES
YES
YES
NO
NO
NO
NO (use separate switch to load) NO (use separate switch to load) NO (use separate switch to load)
NO
NO
NO
NO
NO
NO
240V~ 10A 2 year
240V~ 2A (40W min)
Homes, small offices
TPLP2 – Panel LED
240V~10A 2 year
240V~ 2A (40W min)
Toilets, bathrooms
CLC22LED – Circular LED
240V~10A 5 year
240V~5A (40W min)
Car parks, entrance ways, garage doors, driveways, porches, backyards FLS20LED – LED Flood lights
clipsal.com/sensors
PIR Motion Sensor Flush Mount Gimbal
Dual-Tech Occupancy Sensor
Microwave Sensor
753CF1
753CF2
Standalone 220 – 240V, 50 / 60Hz 3-Wire Simple, unobstrusive flush design, gimble head
752/CD1RC
752/CD2RC
752HR2RC
Standalone
Standalone
240Va.c. ±10% / 50Hz
220-240Va.c., 50 / 60 Hz
3-Wire
3-Wire
Dual technology for high accurancy Detection for highbays
PIR Sensor, Master DALI Output PIR Sensor, Slave
752DALIRC (Master) 752DALIS (Slave) Standalone
220-240Va.c., 50 / 60 Hz
3-Wire
Daylight harvesting, DALI broadcast outputs
PIR Sensor Wide Range
752IR2RC Standalone 220-240Va.c., 50 / 60 Hz 3-Wire Wide detection
PIR, Motion detection IP20 Flush for false ceiling
Dual (PIR and/or Ultrasonic), Motion and Occupancy detection (fine movement)
IP20
Ceiling (Flush/Surface)
High Frequency Dopler Effect, Motion and Occupancy detection (fine movement)
IP40 (Flush)
IP42 (Surface)
Ceiling (Flush/Surface)
PIR, Motion detection
IP40 (Flush) IP42 (Surface) Ceiling (Flush/Surface)
PIR, Motion detection
IP40 (Flush) IP42 (Surface) Ceiling (Flush/Surface)
360°
360°
360°
360°
360°
Ø 7m 30s -30min Pulse mode
YES
PIR: Ø 8m US: 10x16m
Channel 1: 30 sec 30 min Channel 2: 10 sec 15 min
5 sec 30 min
YES
Channel 1: 5 sec 30 min Channel 2: 10 sec 60 min
Ø 10m at H = 5,5 – 10m Ø 14m at H = 2,5 – 5m Channel 1: 10 sec 30 min, 1s
pulse Channel 2: 10 sec 60 min
YES
Ø 8m at H = 2.5m 1 – 60 min Pulse mode
YES
Ø 30m
Channel 1: ww 10 sec 30 min, 1s pulse Channel 2: 10 sec 60 min, 5s pulse
YES
NO
NO
Wood, glass, thin brick
NO
NO
NO (use separate switch to load) YES
YES
YES
YES
NO
YES
YES
YES
YES
NO
YES – via Control YES – via Control NO
System Aux input System Aux input
(using Ch 2)
(using Ch 2)
YES – via Control System
NO
Aux input (using Ch 2)
YES – via Control System Aux input (using Ch 2)
240V, 4A max 100W LED SA Resistive motor: 100W
3 year Homes, small offices
TPDL1C1 – LED Downlights
240V~8A 2 year
240V~10A / 5A
Load 1: 220-240 V~, 8A max, 100W LED Load 2: 100W Motor 5A res 3 year
Dual channel: Max. 25 DALI ballasts, – 16V d.c. , 50mA max.
3 year
Load 1: 220-240 V~, 8A max, 100W LED Load 2: 100W Motor 5A res 3 year
Public conveniences, open plan
Warehouses, gyms, hotel lobbies,
offices, class rooms, libraries/studies staircases, carparks
TPLP – Panel LED
TPHBM1 – High Bay LED
Class rooms, conference rooms, lobbies, retail stores, offices TPLP series
Lobby, warehouses, offices, corridors, function rooms TPDL402H2 – LED Downlight 35W
24
System Sensors Selection Guide
C-Bus Multi-Sensor, PIR, Light Level and IR Flush Ceiling Mount
C-Bus Multi-Sensor, PIR Light Level and IR Surface Mount
C-Bus Sensor PIR and Light Level Flush Ceiling Mount
C-Bus Sensor PIR and Light Level Surface Mount
Cat Number
5753PEIRL
5754ODPEIR
5753L
5754ODPE
Standalone or System Sensor
C-Bus System
C-Bus System
C-Bus System
C-Bus System
Supply Voltage
C-Bus
C-Bus
C-Bus
C-Bus
Special Feature
Native C-Bus Multi sensor for system based occupancy control & daylight harvesting
Native C-Bus Multi sensor for system based occupancy control & daylight harvesting
Native C-Bus PIR sensor for system based occupancy control & daylight harvesting
Native C-Bus PIR sensor for system based occupancy control & daylight harvesting
Sensor Technology
PIR / PE
PIR / PE
PIR / PE
PIR / PE
IP Rating
Indoor
Indoor
Indoor
Indoor
Mounting
Flush ceiling
Surface
Flush ceiling
Surface
Detection Angle
360°
360°
360°
360°
Detection Range
Ø 15m at H- 2.4m
Ø 10m at H- 2.4m
Ø 15m at H- 2.4m
Ø 10m at H- 2.4m
Timer Setting
1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
Light Level Sensor
YES
YES
YES
YES
Material Penetration
NO
NO
NO
NO
Manual Override
YES
YES
YES
YES
IR Control
YES – C-Bus IR remote control
YES – C-Bus IR remote control
NO
NO
Connectivity
Can control C-Bus connected loads Can control C-Bus connected loads Can control C-Bus connected loads Can control C-Bus connected loads
Output Ratings
C-Bus
Design
C-Bus
Warranty
2 year
Suggested Application
Commercial, Residential, install flush into ceiling
With Typical Clipsal Lighting Load N/A
C-Bus
C-Bus
2 year
Commercial, Residential, install onto ceiling or slab surface N/A
C-Bus
C-Bus
2 year
Commercial, Residential, install flush into ceiling N/A
C-Bus
C-Bus
2 year
Commercial, Residential, install onto ceiling or slab surface N/A
clipsal.com/sensors
C-Bus PIR Occupancy Sensor Outdoor
C-Bus PIR Occupancy Sensor Corner Mount
DALIcontrol PIR
Motion Sensor 30 Series Mechanism
DALIcontrol Motion Sensor Flush Ceiling Mount
5750WPL-GY
5751L-WE
DCDAL31MOD
DCDALMS360
C-Bus System
C-Bus System
DALIcontrol System
DALIcontrol System
C-Bus
C-Bus
DALI
DALI
Native C-Bus PIR sensor for
Native C-Bus PIR sensor for
system based occupancy control system based occupancy control
Native DALIcontrol PIR sensor for system based occupancy control
Native DALIcontrol Multi sensor for system based occupancy control & daylight harvesting
PIR
PIR
PIR
PIR
IP66
Indoor
Indoor
Indoor
Surface
Surface
Grid plate or ceiling housing
Flush
110°
90°
120°
360°
up to 18 metres from the unit at H- 2.4m 1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
6m x 6m at H- 2.4m
1 second to 18 hrs, 12 mins, 15 secs (1 sec intervals)
Ø 5m at H- 2.7m 1 min to 255 mins
Ø 10m at H = 2.4m 1 min to 255 mins
YES
YES
NO
YES
NO
NO
NO
NO
YES
YES
YES
YES
NO
Can control C-Bus connected loads
NO
Can control C-Bus connected loads
NO
Can control DALI connected loads
NO
Can control DALI connected loads
C-Bus
C-Bus
2 year
Commercial, Residential, install onto ceiling or slab surface or wall N/A
C-Bus
DALI
C-Bus
DALI
2 year
2 year
Commercial, Residential, install onto ceiling or slab surface or wall N/A
Commercial, install into 30M grid plates or DALIcontrol ceiling housing N/A
DALI DALI 2 year Commercial, install flush into ceiling N/A
Schneider Electric (Australia) Pty. Ltd.
33-37 Port Wakefield Road, Gepps Cross, South Australia, 5094 PO Box 132,
Enfield Plaza, South Australia, 5085
clipsal.com
Consumer Support Enquiries
Phone: 1300 669 925 Website: clipsal.com/contactus
National Customer Care (trade only)
Phone: 1300 369 233 Email: plugin@clipsal.com.au
November 2017
©2017 Schneider Electric. All Rights Reserved. Schneider Electric | Life Is
On, EcoXpert, and Clipsal are trademarks and the property of Schneider
Electric SE, its subsidiaries, and affiliated companies. All other trademarks
are the property of their respective owners. 988-20011109_AU-GB
References
- Innovative Electrical Products & Solutions - Clipsal by Schneider Electric
- Clipsal Product and Customer Support - Clipsal by Schneider Electric
- Motion and Occupancy Sensors for ‘Hands-free’ Experience - Clipsal by Schneider Electric
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>