AirMetER-DX Cesva Noise Module Installation Guide
- August 26, 2024
- airmet
Table of Contents
AirMetER-DX Cesva Noise Module
Product Specifications
- Product: Cesva Noise Module
- Manufacturer: Air-Met Scientific
- Installation Guide Revision: July 2024
FAQ
Q: What should I do if I encounter issues with power supply to the noise module?
A: Double-check the alignment of the notches when plugging in the module. Ensure a secure connection for both power and communication.
Q: Can I use additional mounting hardware for the noise module?
A: It is recommended to use the supplied cable ties for mounting to maintain product integrity and performance.
INSTALLING THE CESVA NOISE MODULE
-
To mount the Cesva noise module on the pole, pass the supplied cable ties through the bracket on the back of the noise module and around the tripod pole at both the top and bottom of the bracket.
-
When plugging in the noise module, make sure you align the notches correctly. This will provide power and communication with the noise module.
CONTACT US
NEED HELP?
If you have any questions or require troubleshooting while using this guide,
our team are here to assist you. Please feel free to contact us at any of the
following means:
- 1800 000 744
- engineeredsolutions@airmet.com.au
- www.airmet.com.au
Alternatively, scan the QR code to locate your nearest Air-Met Scientific office.