rocstor Y10G010-B1 TrueReach 4K60Hz USB to HDMI over Wireless Extender User Manual

rocstor Y10G010-B1 TrueReach 4K60Hz USB to HDMI over Wireless Extender

User Manual

Y10G010-B1

Contact Information

Corporate Headquarters
12979 Arroyo Ave
San Fernando, CA 91340 – USA

Oce: +1 818-727-7000
Fax: +1 818-875-0002
Email: info@Rocstor.com

Technical Support / RMA
Hours: 9:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)

Sales Info
Hours: 8:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)

Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com

Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com

Corporate, Government and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers nd a storage solution that best serves their needs. We will help you determine your best purchasing options. For more information please contact the appropriate department below or call us at +1 818-727-7000.

General sales information: sales@Rocstor.com
Corporate sales information: corporate_sales@Rocstor.com
Educational sales information: academic_sales@Rocstor.com
Federal, State & Local government sales information: government_sales@Rocstor.com

Disclaimer

©2024 Rocstr, Inc. Rocstor is registered trademark of Rocstor, Inc. The terms HDMI, HDMI High-Denition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Important safety notice

1. Avoid exposing this device to rain or placing it near water, as any liquid entering the device may lead to failure, re, or electric shock.
2. Never insert metallic objects into the open parts of this device to prevent the risk of electric shock.
3. Ensure that any repairs to the device are conducted only by a qualied technician.
4. Avoid placing this device near radiators, heat registers, or in direct sunlight to prevent potential damage.

Introduction

This TrueReach is a 4K@60Hz USB Type-C wireless extender, consisting of a transmitter and a receiver. Utilizing ipcolor STREAM technology, it achieves high-denition, low-latency transmission. Operating on the 5G wireless frequency band, it oers stable anti-interference and safety performance. Supporting 1-to-1 wireless transmission, it can reach distances of up to 20 meters, eectively eliminating the need for complicated wiring. Ideal for applications such as video conferences, home entertainment, and multimedia education, it provides an optimal wireless video transmission solution.

Note:

1. Transmission distances may vary depending on the environment.
2. Signals may be reduced or completely lost by solid structures such as walls, bricks and glass.
3. The surrounding wireless signal may cause certain interference to the transmission, and the channel can be switched to reduce the interference.

Features

• Utilizing ipcolor STREAM technology enables high-denition and low-latency transmission.
• Supports resolutions up to 3840×2160@60Hz, with backward compatibility.
• Supports wireless transmission up to 20 meters (line of sight).
• Oers SSID pairing and channel switching capabilities to avoid interference when multiple sets are used in the same area.
• Utilizes 5G wireless frequency bands for strong anti-interference performance.
• Supports rmware upgrades via Micro USB port.
• Features a portable design for plug-and-play convenience.

Package Contents

Installation Requirements

1. TypeC source device (DVD, game console, PC, etc.)
2. HDMI display device (TV, projector, LED screen, etc.)

Panel Description – Transmitter (TX)

Panel Description – Receiver (RX)

Installation Procedures

1. Connection Diagrams

One to one connection

2. Connection Instructions

a) Connect the transmitter to the TypeC output port of the signal source device.
b) Connect the receiver to the HDMI input port of the display device.
c) Plug the power supply into the devices to get started.

Note: Please connect the Micro USB cable to the 5V 1A wall charger when transmitting 4K video, for long-distance use or when the picture is not smooth.

3. SSID Pairing
1. Enter the SSID pairing mode by holding the transmitter and receiver’s channel switch buttons for ve seconds. Both WiFi connection indicators will ash quickly in blue.

2. When the SSID pairing is successful, the WiFi indicators on the transmitter and receiver will change from quick ashing to slow ashing or steady on.

FAQ

Q: Why the receiver and transmitter cannot be connected, showing “Search ipcolor Tx…” on the screen?

A: 1) Move transmitter and receiver closer.
2) Re-power the transmitter or receiver.
3) Re-pair the transmitter and receiver.

Q: Why the Wi-Fi indicator is steady on but showing “Please check the TX input signal” ?

A: 1) Make sure the TX has TypeC input and that the resolution is within the specied range.
2) Try to connect the signal source directly to the display device, or change the signal source and test again.

Q: Why is the display stuttering or unstable?

A: 1) Place the transmitter or receiver within the signal coverage and minimize obstructions between the transmitter and receiver.
2) Switch to a dierent channel to avoid interference from other wireless signals.
3) Re-power the receiver or transmitter.

Specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>