rocstor Y10G015-B1 True Reach HDMI Splitter And Extender User Manual
- August 29, 2024
- rocstor
Table of Contents
rocstor Y10G015-B1 True Reach HDMI Splitter And Extender User Manual
TrueReach
HDMI SPLITTER & EXTENDER
1 to 2 4K@60Hz 229ft(70m) HDMI Splitter Extender ipcolor image
User Manual
Y10G015-B1
Important safety notice
- Do not expose this device to rain, moisture and liquid.
- Do not put any stuff into the device.
- Do not disassemble or repair this device without qualified service technician.
- Make sure the specification matched if using 3rd party DC adapters.
Introduction
The Trureach HDMI Splitter & Extender serves as a 1-input, 2-output extender splitter kit, seamlessly combining distribution and extension functionalities. It efficiently distributes a single HDMI input signal to two identical outputs, extending these signals up to 70 meters while maintaining a pristine 4K60Hz resolution. Additionally, it offers support for I passback, RS-232 control, and other essential functions. Ideal for various applications including studios, multimedia classrooms, and rail transit systems.
Features
- Enjoy zero-latency transmission.
- Easily split and extend a single HDMI input signal to two identical network output signals.
- Experience stunning 4K@60Hz resolution support.
- Transmit signals up to 70 meters using Cat6/6A/7 cables.
- Benefit from IR passback support (20KHz~60KHz).
- The transmitter features HDMI loop out capability.
- The receiver conveniently outputs digital audio from the TV or source device via the S/PDIF port.
- Choose between EDID passthrough or manual EDID settings.
- Take advantage of RS-232 command control.
- Stay protected with surge, lightning, and ED protection features.
- Includes rack mount ears for easy installation.
- Supports PoC, requiring only the transmitter to supply power.
Package Contents
Installation Requirements
- HDMI source device (PC, DVD, play station, etc.）
- HDMI display device (TV, monitor, projector, etc.)
- UTP/STP CAT6/CAT6A/CAT7 cable. Follow standard IEEE-568B. It is recommended to choose high-quality network cables.
Panel Description – Transmitter (TX)
Panel Description – Receiver (RX)
Installation Procedures
1. Network cable
Follow the standard of IEEE-568B:
1-Orange/white
2-Orange
3-Green/white
4-Blue
5-Blue/white
6-Green
7-Brown/white
8-Brown
2. Connections
3. Connection instructions
1- Use an HDMI cable to connect the source device to the HDMI IN port of the transmitter.
2- Utilize network cables to connect the CAT6 OUT ports of the transmitter to the CAT6 IN ports of the receivers.
3- Connect the HDMI OUTPUT ports of the receivers to the display devices using HDMI cables.
4- If employing HDMI loop out, connect the LOOP OUT port of the transmitter directly to the display using an HDMI cable.
5- For RS-232 control, connect the RS-232 port of the transmitter to an external device.
6- Power up the devices to initiate operation.
4. IR User Guide
1- Connect the IR blaster extension cable to the IR OUT port of the transmitter, and the IR receiver extension cable to the IR IN port of the receivers.
2- Position the emitter of the IR blaster extension cable as close as possible to the IR receiving window of the source device.
3- Aim the remote control at the receiving head of the IR receiver extension cable to operate.
Function setting
1. RS232 settings
The default configuration is as follows:
Baud rate: 9600
Data bits: 8
Stop bits: 1
Parity: 0
2. EDID settings:
There are 16 built-in EDIDs in the product, which can be switched through the DIP switch. The upward DIP switch indicates “1”, and the downward DIP switch indicates“0”.
Auto output at a resolution compatible with all displays.
FAQ
Q: Why there is no image output on the display device?
A: 1) Please check the power supply and all the cables are well-connected.
2) Please check whether there is an HDMI signal input.
3) Please make sure that the corresponding network port output is not turned o
by the RS-232 command.
Q: Why is the output image unstable?
A: 1) Please check whether the length of the network cable is within 70
meters.
2) Press the “reset” button on TX and RX panels to restart and reconnect.
Q: Why does the TV have a snowy/fuzzy screen?
A: 1) Please change the HDMI cable or use a shorter HDMI cable.
2) The recommended length of the HDMI cable connected to the transmitter is ≤3
meters, and the recommended length of the HDMI cable connected to the receiver
is ≤5 meters.
Technical Parameters
Contact Information
Corporate Headquarters
12979 Arroyo Ave
San Fernando, CA 91340 – USA
Oce: +1 818-727-7000
Fax: +1 818-875-0002
Email: info@Rocstor.com
Technical Support / RMA
Hours: 9:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com
Sales Info
Hours: 8:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell: +1 818-727-7000 (DOM/INTL)
Fax: +1 818-875-0002
Email: support@Rocstor.com
Corporate, Government and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers find a storage solution that best serves their needs. We will help you determine your best purchasing options. For more information please contact the appropriate department below or call us at +1 818-727-7000.
General sales information: sales@Rocstor.com
Corporate sales information:
corporate_sales@Rocstor.com
Educational sales information:
academic_sales@Rocstor.com
Federal, State & Local government sales information:
government_sales@Rocstor.com
Resellers/Business Development/OEM Partners
All Channel National and International Resellers, VARs, Consultants …
contact Rocstor Channel Sales:
call: +1 818-727-7000
Email: reseller_info@Rocstor.com
Disclaimer
©2024 Rocstr, Inc. Rocstor is registered trademark of Rocstor, Inc. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.The product name and brand name may be registered trademark of related manufactures. ™ and ® may be omitted on the user manual. The pictures in this user manual are just for reference. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.