HOLLYLAND VenusLiv V2 All in One Live Streaming Camera User Manual
- August 26, 2024
- HOLLYLAND
Table of Contents
HOLLYLAND VenusLiv V2 All in One Live Streaming Camera
USER MANUAL
Packing List
1. Venusliv V2: 1
2. 12V/2A Power Adapter: 1
3. USB Cable: 1
4. Lens Cap: 1
5. User Manual & Packing List card: 1
6. Warranty Card: 1
Packing List
Product Overview
Streaming Introduction
UVC Streaming
1. Connect the camera to a computer using a USB cable; ensure that both the
computer’s USB port and the cable support the 3.0 standard.
2. Open the streaming software on the computer.
3. Select Hollyland PRO CAM as the video source and Hollyland as the audio
source, then start streaming.
Streaming via Switcher
1. Connect the camera to a switcher using an HDMI 1.4 or higher cable.
2. Tap choose More Settings, and select Extend. It is not recommended to use
Mirroring for streaming.
3. After the switcher displays video and audio readings, make sure the
switcher is connected to the network, enter the streaming URL, and then start
streaming.
RTMP Streaming
1. Make sure the camera is connected to the network.
2. Open the RTMP app, and tap Add to enter the streaming URL to start
streaming.
Product Introduction
Button Introduction
1. Power Button
- Long press for 3s to power on/off the camera.
2. Fn Button
- Press once to show/hide the volume bar.
3. LIVE Button
- Press once to open the most recently used app.
- Press once on the built-in camera app’s interface to take photos or record videos.
Make sure an SD card or USB flash drive is inserted.
Indicator Introduction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>