SmallRig BSH2343 Universal 2 in 1 SSD Clamp Instruction Manual
- August 27, 2024
- SmallRig
Table of Contents
SmallRig BSH2343 Universal 2 in 1 SSD Clamp Instruction Manual
Thank you for purchasing SmallRig’s product.
Please read this Operation Guide carefully.
Please follow the safety warnings.
In the Box
- PSSD Clamp × 1
- Operating Instruction × 1
- Metal Ring Sticker × 1
Installation Instruction
- Rotate the knob counterclockwise as shown in the picture to adjust the clamping space. Insert the hard drive as illustrated, then rotate the knob clockwise until the hard drive is securely clamped.
2. Rotate the small knob counterclockwise as shown in the picture to secure the USB-C cable, ensuring stable data transmission.
3. Press the button as indicated to insert the cold shoe mount into the MagSafe base until securely installed, then attach the holder to the cage using the cold shoe mount.
4. Detach the cold shoe mount, the SSD holder can be attached directly to the back of the MagSafe-enabled phone. To avoid the risk of falling during intense movements, it is recommended to use a phone case with MagSafe to strengthen the magnetic force.
- The metal ring sticker has a protective film on both sides, please remove before use.
- The ring features disposable removable adhesive on the back.
After peeling off the protective film, attach the SSD holder directly to the metal ring sticker.
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Add: Rooms 103, 501 and 601, Building 5, Fenghe Industrial Park,
Nos. 1301-50 Guanguang Road, Longhua District, Shenzhen,
Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Add: Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50
Guanguang Road, Xinlan Community, Guanlan Street, Longhua
District, Shenzhen, Guangdong, China.
Service & Warranty
Please keep your original receipt and guarantee card. Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.
After-sale Warranty Terms
SmallRig products are entitled to warranty services as of the date of payment.
- Electronic products（except V mount battery): 1-year warranty.
- V mount battery: 2-year warranty.
- Non-electronic products: 2-year warranty.
Note: In case of any conflict between our warranty period policy and applicable laws and regulations of the country / region where the products are sold, the latter shall prevail.
This Warranty Does Not Cover
- If users fail to adhere to the “Operating Instruction” or any “Warnings” stated in the user manual, resulting in a quality failure, it falls outside the scope of warranty coverage.
- The product identification or SN label is removed or defaced in any way.
- Product damage caused by problems not attributable to the quality of the products such as improper use of the products.
- Product damage caused by unauthorized modification, disassembly, repair and other acts.
- Product damage caused by fires, floods, lightning and other force majeure factors.
Warranty Mode
- For the products within the scope of warranty, SmallRig will repair or replace them on the basis of specific failures; the repaired / replaced products / parts are entitled to the remaining part of the original warranty period.
Contact Information
- You’re advised to contact the online customer service personnel of corresponding shopping platform and submit a repair service application.
- You may also apply for repair service through SmallRig’s service email. Service Email: support@smallrig.com
Guarantee Card
Read More About This Manual & Download PDF: