Miele WXI860 WCS TDos & IntenseWash W1 Front Loading Washing Machine Instruction Manual
- June 4, 2024
- Miele
Table of Contents
Miele WXI860 WCS TDos & IntenseWash W1 Front Loading Washing Machine
Before the first use
Damage from incorrect installation and connection.
Installing and connecting the washing ma-chine incorrectly will cause serious
dam-age to property.
Damage resulting from failure to re-move the shipping struts.
Failure to remove the shipping struts can result in damage to the washing
machine and to adjacent cabinetry or appliances. Remove the shipping struts as
described in “Installation and connection”.
Switching on the washing machine
- Turn the program selector to the Normal program.
- The welcome tone will sound and the welcome screen will light up.
- The display will now guide you through the initial commissioning process, which is di-vided into 5 steps.
- For additional information, please refer to the separate operating instructions sup-plied.
Operation
Operating the sensor buttons
- The sensor buttons react to fingertip con-tact. If a sensor button is illuminated, it can be selected.
- If a sensor button is brightly lit, this means: currently selected
- If a sensor button is dimly lit, this means: selection possible
-
Control field
The control field consists of a display and various sensor buttons. -
Display
Various values are displayed and/or selected on the display. -
sensor buttons
The values in the display can be changed with the sensor buttons. -
OK sensor button
Confirm the selected values with the OK sensor button. -
TwinDos sensor button with the additional Whites and Colors sensor buttons
Deactivate or activate automatic deter-gent dispensing via the TwinDos sensor button. -
Optical interface
This is used by the Service department as a transmission point. -
Sensor buttons for options
You can supplement the wash pro-grams with options.
-
sensor button
You can view information about the energy and water consumption of your washing machine with the sensor button. -
sensor button
The sensor button starts the Delay Start function. -
sensor button
You can specify the degree of soiling of the load in 3 settings. This sensor but-ton is only active when the TwinDos option is activated. -
Start/Add laundry sensor button
- Touching the Start/Add laundry sensor button starts the selected program. The sensor but-ton lights up constantly.
- Once the program has been started, the Start/Add laundry sensor button allows you to add laundry.
-
sensor button
Activates Cap Dosing via the detergent drawer. -
Program selector
For selecting programs and for switching the machine off. The washing ma- chine is switched on when you select a program, and switched off by turning the program selector to the position.
Preparing the laundry
-
Preparing the laundry
-
Empty all pockets.
Damage due to foreign ob-jects.
Nails, coins, paper clips, and so on can cause damage to garments and components in the machine. Check the laundry before wash-ing and remove any such foreign objects. -
Sort the laundry by color and by care label. Most garments have a textile care label in the collar or side seam.
-
Pre-treat stains and badly soiled areas.
-
-
Selecting a program
There are three possible ways to select a program.-
Selecting the standard programs with the program selector dial
-
Turn the program selector to the required program. The selected program will be shown in the display. This will then be replaced by the standard display.
-
Selecting additional programs by setting the program selector to “Additional programs” and using the display
-
Turn the program selector to the Additional programs position. The following appears in the display: Out-door
-
Touch the sensor buttons until the program you want appears in the display.
-
Confirm the program with the OK sensor button.
-
Selecting additional programs by setting the program selector to Mobile Start and using the Miele app
-
Turn the program selector to the Mobile Start position.
The following appears in the display:
Load laundry, close the door and press “Start”. Appliance can be remotely controlled -
Follow the instructions in the display and start the program.
The following appears in the display:
Mobile Start
The washing machine can now be operated with the Miele app.
-
-
Loading the washing machine
-
Opening the door
-
Take hold of the door and pull it open.
Unfold the laundry and load loosely into the drum. -
Closing the door
-
Make sure that no items are caught between the door and the seal.
-
Shut the door gently.
-
-
Selecting program settings
Selecting a temperature/spin speed
Touch the sensor buttons above or below the temperature or spin speed value in the display until the temperature/spin speed you want appears in the display.
Selecting options
There are 2 ways of selecting options.-
Directly via the sensor buttons
-
Touch the sensor button for the required option. It will then light up brightly.
-
Via the Options sensor button and the display
-
Touch the Options sensor button. The following ap-pears in the display: No Options
-
Touch the sensor buttons until the option you want appears in the display and confirm this with the OK sensor button.
-
Degree of soiling
The sensor button is only active when the TwinDos sensor button is activated. -
Light
No visible soiling or stains -
Normal
Visibly soiled and/or just a few slight stains -
Heavy
Heavily soiled and/or stains clearly visible -
Delay Start/SmartArt
-
Delay Start
With the Delay Start function, you can delay the start of the program. The start of the program can be delayed from 15 minutes up to a maximum of 24 hours. -
SmartArt
The SmartArt function lets you define a time period during which your washing ma-chine will start automatically. The washing machine is started via a signal, e.g., from your energy supplier, that indicates that the electricity rate is particularly economical.
-
-
Add detergent
There are several options for adding deter-gent to the washing machine.
TwinDos
TwinDos dispensing is automatically activated for all programs in which dispensing is possible.
Changing TwinDos dispensing
You can change the suggested color com-position of the laundry.-
Touch the Whites or Colors sensor but-ton.
Deactivating TwinDos dispensing -
Touch the TwinDos sensor button. The sensor button is only dimly lit and dispensing is deactivated.
-
Filling with detergent
This washing machine requires particularly efficient detergent. Add detergent in accordance with the value in the pull-down dosage display.
Ensure that TwinDos dispensing is deactivated. -
Pull out the deter-gent drawer and add detergent to the compartments.
-
Chlorine bleach for removing stains or liquid detergent for the pre-wash
-
Detergent for the main wash, including Soak if selected Fabric softener, liquid starch, or caps
-
Cap Dosing
If you selected Cap Dosing when setting the program, detergent will be dispensed via the capsule for this wash program. -
Using powder detergent
The detergent drawer contains an insert for liquid detergent in the compartment. This insert must be removed to use powder detergent. It is not possible to use powder detergent in the compartment. -
Using chlorine bleach
Damage due to chlorine bleach. Textiles may be discolored or their fibers damaged.
Only use chlorine bleach on suitable textiles.
Chlorination must be activated in the set-tings before chlorine bleach is first used.
The Pre-wash option must not be selected.
-
Pour max. 1/4 cup (60 ml) of bleach into the chamber.
The chlorine bleach is added automatically 10 minutes before the end of the main wash.
-
-
Start the program
-
Touch the flashing Start/Add laundry sensor button.
-
The door will lock and the wash program will start.
-
The program status will appear in the dis-play.
Adding laundry during a program sequence -
Laundry can be added or removed at any time, provided that the symbol is not illuminated in the display.
-
Touch the Start/Add laundry sensor but-ton.
The following appears in the display: Please wait -
Wait until the following display lights up: Door can be opened
-
Open the door and add or remove laundry.
-
Close the door.
-
Touch the Start/Add laundry sensor button.
-
-
Program end
The door is locked in the Anti-crease phase. The display alternates between: End/Anti-Crease and Press Start button-
Unlock the door either by touching the Start/Add laundry sensor button or by turning the program selector to the position.
The door will unlock.
Tip: After the Anti-crease phase, the door will unlock automatically. -
Take hold of the door and pull it open.
-
Remove the laundry.
Items left in the drum could discolor other items in the next wash or become discolored themselves.
Remove all items from the drum. -
Check the folds in the door seal for any foreign objects.
Tip: Leave the door slightly open. -
If you used a capsule, remove it from the detergent drawer.
Tip: Leave the detergent drawer slightly open.
-
Options
Options
You can supplement the wash programs with options.
SingleWash
For efficiently washing a very small load (< 2.2 lb/1 kg) in a normal wash
program. The wash duration is reduced. Please note the following advice:
Important
When adding detergent manually, only use liquid detergent and use the proper
amount. Use a maximum of 50% of the specified amount of detergent for ½ load.
The use of bleach is not possible.
SoftSteam
In order to reduce creasing, the laundry undergoes a smoothing process at the
end of the program. Reducing the maxi-mum load by 50% will give a better
result. Please note the load information in the display. Small loads achieve a
better result.
The garments must be suitable for drying in a tumble dryer and suitable for
ironing.
Buzzer
A buzzer sounds at the end of the pro-gram. The buzzer sounds until the
washing machine is switched off.
Pre-wash
- For laundry with large amounts of dirt, e.g., dust and sand.
- Pre-wash and the use of bleach are not possible.
- The chlorine bleach is added too early.
- Only liquid detergent may be added to the chamber of the detergent drawer.
- Powder detergent clogs up the chamber and water can escape from the detergent drawer.
Gentle
Drum rotation and wash duration is reduced. Lightly soiled items are washed
more gently.
Eco
The Economy option helps to save energy. The wash temperature is reduced and
the wash duration is increased in re-turn. The wash program continues to pro-
vide a deep clean.
Extra Rinse
An extra rinse can be activated to achieve a more thorough wash result.
Soak
- For heavily soiled and stained items with protein stains. A duration of between 30 minutes and 6 hours can be selected for the soak process. See “Settings” for more information.
- The factory default setting is 30 minutes.
Allergy Wash
This option should be used where high standards of hygiene are required.
Energy consumption is increased to lengthen temperature holding times and
water consumption is increased to improve rinsing efficiency. The items must
be suitable for drying in a tumble dryer and suitable for ironing.
Program overview
Detergent
Cleaning and care
Cleaning the detergent drawer
Washing at low temperatures and the use of liquid detergent can lead to a
build-up of bacteria in the detergent drawer.
-
Clean the entire drawer at regular intervals for hygiene reasons, even if you are using the TwinDos system exclusively.
-
Pull out the deter-gent drawer until a resistance is felt.
-
Press down the release button and, at the same time, pull the drawer completely out of the machine.
Removing and cleaning the insert for liquid detergents
An insert for liquid detergents is located in the compartment of the detergent
drawer.
- Remove the insert. Clean the insert thoroughly with warm water.
Cleaning the siphon inside the compartment
Compartment 1 has a siphon for better dispensing of the chlorine bleach.
- Remove the release catch.
- Remove the siphon and clean under warm running water.
Cleaning the siphon inside the compartment
-
Remove the siphon from the compartment and clean under warm running water.
-
Clean all compartments with warm water.
Cleaning the detergent-drawer housing
- Use a bottle brush to remove deter-gent residues and limescale from the jets inside the detergent-drawer housing.
- Replace the detergent drawer.
Tip: Leave the detergent drawer slightly open to allow it to dry.
Sanitize info (cleaning the drum)
Washing at low temperatures and/or using liquid detergents can cause bacteria
and odors to build up in the washing machine. Use the Clean Machine program to
clean the washing machine. Note the message in the display: Sanitize info: Run
a high temp. program or the “Clean Machine” program
Frequently asked questions
