NGS Roller Nitro 2 Outdoor Wireless Portable Speaker User Manual

NGS Roller Nitro 2 Outdoor Wireless Portable Speaker

CONTROL BUTTONS

1. Mode / TWS
   Short press: change mode (FM/BT/USB/AUX IN/TF)

2. Previous song
   In FM mode: short press to the previous channel

3. Power button
   Long press turn on/off for about 3 seconds/times

4. Next song
   In FM mode: short press to the next channel

5. Play/Pause button
   Short press: play/pause
   Long press to exit wireless connect
   Long press to search the programm in the FM mode

6. Volume +

7. Volume –

8. TF audio input

9. AUX audio input

10. USB audio input

11. Type-C interface charging port

BLUETOOTH MODE

HOW TO CHARGE?

TWS

RADIO MODE

Note: Connect the USB cable for a better radio signal

USB/TF MODE

AUX IN MODE

TECHNICAL SPECIFICATIONS

• Compatible with bluetooth 5.0 Yes
• TWS (get double power connecting
• 2 speakers at the same time without
• cables) Yes
• Output peak power 20W (2 x 10W)
• RMS power 10W (2 x 5W)
• AUX audio input Yes
• USB audio input Yes
• TF audio input Yes
• Volume control Yes
• Battery Ion-Li 1200mAh x2
• Battery life 12 hours*
• Water resistant IPX5
• 3 hours at 100% volume 12 hours at 70% volume 15 hours at 50% volume

Battery warranty

The battery is a consumer product, and as such it is under warranty for 12 months.

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

technical support: www.ngs.eu/support
www.ngs.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>