anko K 43-363-865 3 In 1 Playpen Rack Instruction Manual

: August 24, 2024
: Anko

Table of Contents

anko K 43-363-865 3 In 1 Playpen Rack
Product Usage Instructions
PARTS
INSTALLATION
INSTALLATION
OPERATION
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

anko K 43-363-865 3 In 1 Playpen Rack

Specifications

Product: 3-In-1 Playpen
Conforms to: EN1930:2011 & EN 12227:2010
Intended Use: For children from 6 to 24 months or small to medium pets
Maximum Panels: 6 including gate

Product Usage Instructions

Warnings

Securely install gate or enclosure according to manufacturer’s instructions.
Never leave child unattended while using the product.
Check for damaged, missing, or disassembled components before use.
Avoid placing near open fires or heat sources.
Ensure the playpen is fully erected and all locking mechanisms are engaged before placing a child inside.

Installation

The safety barrier must be fitted between rigid surfaces like plasterboard, timber, or hardwall. Follow these steps for installation:

Position the barrier in the desired location.
Secure the wall brackets with screws.
Ensure the barrier is correctly closed with the locking/latching mechanism engaged.
Regularly check and tighten all assembly fittings.

Parts
The product includes various parts for assembly, including panels, caps, wall brackets, corner threads, corner tubes, gate stopper, wall plugs, and screws.

FAQ

Q: Can this playpen be used as a room divider?
A: Yes, the playpen can be configured as a room divider or a safety barrier based on your needs.
Q: What is the recommended age range for children to use this product?
A: The product is intended for children aged 6 to 24 months or small to medium pets.
Q: How many panels can be used in the safety barrier configuration?
A: A maximum of 6 panels, including the gate panel, can be used as a safety barrier.

IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
SCAN HERE FOR MORE INFORMATION ON INSTALLATION OR SPARE PARTS. OR VISIT: CHILDSAFETYHELP.COM.AU
THIS PRODUCT CONFORMS TO EN1930:2011 & EN 12227:2010

WARNINGS

To prevent serious injury or death, securely install a gate or enclosure and use it according to the manufacturer’s instructions.
Never leave child unattended when using this product.
Incorrect installation can be dangerous.
Do not use the safety barrier if any components are damaged, missing or disassembled.
The safety barrier must not be ﬁtted across windows.
Never use with a child able to climb over or dislodge/open the safety barrier which may cause danger.
Never install this product on glass doors. Install this product against reliable doors or walls.
To prevent falls, never use at the top of stairs.
If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible.
To prevent injury, do not put any goods which can be grabbed by children or pets near this product.
Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
Ensure the product to be installed is horizontal and flat on the floor.
This product is intended for use with children from 6 to 24 months or small to medium pets.
Regularly check that the safety barrier is properly installed and secure.
Any additional or replacement parts should be obtained from the Customer Service Centre of the entity you purchased this product.
Barrier must be ﬁtted between rigid surfaces such as plaster board, timber or hardwall.
Always check that the safety barrier is correctly closed.
Use only with the locking/latching mechanism securely engaged.
This safety barrier is for domestic use only.
Never use without Wall Brackets.
This safety barrier must be ﬁtted between a rigid surface such as doorways or walls along with wall brackets secured with screws.
A maximum of 6 panels including gate can be used as a safety barrier.
Check regularly that all assembly ﬁttings are tightened properly.
Do not use the playpen close to an open ﬁre or other heat source.
Do not leave anything in the playpen which may provide a foothold or create a danger of suffocation or strangulation.
Ensure that the playpen is fully erected and all the locking mechanisms are engaged before placing your child in the playpen.
This safety barrier has a manual closing system.

PARTS

INCLUDES

INSTALLATION

ROOM DIVIDER OR SAFETY BARRIER
Suitable placement & conﬁguration of Playpen/Barrier.

PLAYPEN (FREE STANDING)
3 PANEL BARRIER (WALL MOUNTED)
4 PANEL BARRIER (WALL MOUNTED)
6 PANEL BARRIER (WALL MOUNTED)

Note : Ensure additional Corner Tube and Corner Thread are installed when assembling the 6 PANEL BARRIER.

INSTALLATION

PLAYPEN – FREE STANDING

Remove Playpen from box. Loosen each Corner Thread.
Assemble into hexagon shape.
Align the two loose panel ends, then insert Corner Tube into the bottom ﬁrst, and then the top.
Tighten all 6 x Corner Tubes anti-clockwise until locked ﬁrm.

OPERATION

HOW TO OPEN GATE

Using one hand, place thumb on the button and grip Gate Panel with ﬁngers. Slide button across and lift Gate Panel simultaneously.
Open gate in either direction. When released, gate will swing closed automatically.
To enable stay open feature, open gate to 90° angle.

Always check gate is properly closed when in use.
Note : If gate is open and excessive pressure is applied, (such as standing or swinging on the gate) structural damage may occur.

GATE OPENING DIRECTION

The Gate Stopper is pre-installed for Outward Opening.
If Inward Opening is required, use a Phillips head screwdriver (not included) to unscrew the Gate Stopper, flip the opposite way and screw back in.
If the gate is required to open in both directions, unscrew and remove the Gate Stopper completely.

Refer to below steps

BARRIER – WALL MOUNTED

Step 1. A – Side Assembly

Place Wall Brackets through the Corner Tube. Insert the Corner thread at the top of the tube. Insert Bottom (A) Cap at the bottom of the tube.
Insert the assembly into the bottom hole on the panel.
Hold Corner Thread and press downwards. Tilt to insert the assembly into the top hole on the panel. Add Top (A) Cap on top of the panel and turn clockwise until loosely ﬁt.
Turn Corner Thread anti-clockwise to tighten the assembly to the panel.(Do Not Overtighten.)

Step 2. B – Side Assembly

Place Wall Brackets through the Corner Tube. Insert the Corner Thread at the top of the tube. Add Bottom (B) Cap.
Insert the Corner Tube through the hole on the panel into Bottom (B) Cap.
Add Top (B) Cap to the slot at the top of the panel and hold it.
Tilt to insert the assembly through the hole of Top (B) Cap.
Turn Corner Thread anti-clockwise to tighten the assembly to the panel.(Do Not Overtighten.)

Step 3. Wall Mounting

Use a pencil to mark screw hole positions for the Top and Bottom Wall Brackets.
Disassemble the Wall Brackets from the Barrier Panel and Corner Tube. Pre-drill and screw the Wall Brackets in place.
Align panel onto the Wall Brackets.
Replace the Corner Tube through the Wall Brackets.
Assemble the Corner Tube by following applicable steps on pages 10 – 11. Ensure the Corner Tubes are ﬁxed to the Barrier Panel ﬁrmly.

NOTE : Install the Wall Brackets as shown here and on an even surface to ensure Playpen/Barrier is secure.

MAINTENANCE

CARE INSTRUCTIONS
Simply use a soft damp cloth to wipe Playpen/Barrier.
Dry thoroughly after cleaning. Do not use chemicals or abrasive cleaners.

IMAGES/DRAWINGS IN THE MANUAL ARE FOR VISUAL PURPOSES ONLY. ACTUAL PRODUCT MAY VARY SLIGHTLY. THE MANUFACTURER RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURE WITHOUT PRIOR NOTICE.
MADE IN CHINA

CUSTOMER SERVICE:

KMART AU: 1800 124 125
KMART NZ: 0800 945 995
TARGET AU: 1300 753 567
K: 43˛363˛865
T: 68˛948˛931

AFTER SALES SUPPORT:
AU: 03 9005 0127 . NZ: 0800 945 995 WWW.CHILDSAFETYHELP.COM.AU
SCAN HERE FOR MORE INFORMATION ON INSTALLATION OR SPARE PARTS OR VISIT: SCAN HERE FOR MORE INFORMATION ON INSTALLATION OR SPARE PARTS OR VISIT: CHILDSAFETYHELP.COM.AU
Fits openings : 73cm – 376cm