anko K 43-363-872 Metal Gate With Extensions Instruction Manual

: August 24, 2024
: Anko

Table of Contents

anko K 43-363-872 Metal Gate With Extensions
Product Information
Product Usage Instructions
FAQ
PARTS INCLUDES
INSTALLATION
OPERATION
MAINTENANCE
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

anko K 43-363-872 Metal Gate With Extensions

Product Information

Specifications

Product: Metal Gate With Extensions
Fits: Gate with no extensions fits 75cm – 83cm, with 1 x 10cm extension fits 85cm – 93cm, with 2 x 10cm extensions fits 95cm – 103cm
Closing System: Manual closing system
Country of Origin: Made in China

Product Usage Instructions

Ensure safety barrier is fitted between rigid surfaces like doorways, walls, and stair posts with Wall Cups secured with screws.
Screw Adjuster Bolts and Adjuster Screws together and place them into mounting holes in each corner of the gate.
Place a gate in the opening ensuring the bottom rail is flat on the floor and Wall Cups are directly above each other.
Mark the position of each Wall Cup on the wall and/or stair post.
Stick the Wall Cups in position using the Adhesive Pads and fix each cup to the wall using provided screws for added security.
Align the gate with Wall Cups and tighten Adjuster Screws until there is only a 1.5mm gap in the locking mechanism. Do not over-tighten.
To open the gate, place your thumb on the button and grip the Gate Panel with your fingers. Slide the button across and lift the Gate Panel simultaneously.
Open the gate in either direction. When released, the gate will swing closed automatically.
Always ensure the gate is properly closed when in use to avoid structural damage from excessive pressure.
Simply use a soft damp cloth to wipe the gate and dry thoroughly after cleaning. Do not use chemicals or abrasive cleaners.

FAQ

Q: Can I use the safety barrier without Wall Cups?
A: No, it is essential to always use Wall Cups for proper installation and security.
Q: How should I clean the gate?
A: Use a soft damp cloth to wipe the gate and ensure it is dried thoroughly after cleaning. Avoid using chemicals or abrasive cleaners.
Q: What should I do if I notice a gap in the door opening after unpacking?
A: This is normal with pressure-mounted gates. The gap will disappear once the gate is installed correctly between rigid surfaces.

Metal Gate With Extensions
fits openings:

75cm – 83cm (no extensions)
85cm – 93cm (1 x 10cm extension)
95cm – 103cm (2 x 10cm extensions)

SCAN HERE FOR MORE INFORMATION ON INSTALLATION OR SPARE PARTS

OR VISIT: CHILDSAFETYHELP.COM.AU

WARNINGS

WARNING: To prevent serious injury or death, securely install a gate or enclosure and use it according to the manufacturer’s instructions.
WARNING: Never leave a child unattended when using this product.
WARNING: Incorrect installation can be dangerous.
WARNING: Do not use the safety barrier if any components are damaged, missing, or disassembled.
WARNING: The safety barrier must not be fitted across windows.
WARNING: Never use with a child able to climb over or dislodge/open the safety barrier which may cause danger.
WARNING: Never install this product on glass doors. Install this product against reliable doors or walls.
WARNING: To prevent falls, never use this product at the top of the stairs.
WARNING: If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible.
WARNING: To prevent injury, do not put any goods that can be grabbed by children or pets near this product.
WARNING: Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
WARNING: Ensure the product to be installed is horizontal and flat on the floor.
WARNING: This product is intended for use with children from 6 to 24 months or small to medium pets.
WARNING: Safety barriers should be checked regularly to ensure that it is secure and functioning in accordance with these instructions.
WARNING: Any additional or replacement parts should be obtained from the Customer Service Centre of the entity you purchased this product.
WARNING: Barrier must be fitted between rigid surfaces such as plaster board, timber, or hardware.
WARNING: Always check that the safety barrier is correctly closed.
WARNING: Use only with the locking/latching mechanism securely engaged.
WARNING: This safety barrier is for domestic use only.
WARNING: Never use without Wall Cups.
WARNING: This safety barrier must be fitted between a rigid surface such as doorways, walls, and stair posts along with Wall Cups secured with screws.
WARNING: This safety barrier has a manual closing system.

PARTS INCLUDES

INSTALLATION

NOTE

Once the gate has been unpacked, you may notice a gap at the door opening.
This is normal with pressure-mounted gates and the gap will disappear when it is installed correctly.

GATE PLACEMENT

The gate must be installed in a structurally sound opening. Ensure the mounting surface (wall, door frame, stair, etc.) is strong, rigid, and has an even surface.
If using a gate on a stairway, it must be placed on the lowest step.

EXTENSIONS
Measure the space to be enclosed. You may need to use extensions.

Gate with no extensions fits: 75cm – 83cm
Gate with 1 x 10cm extension fits: 85cm – 93cm
Gate with 2 x 10cm extensions fits: 95cm – 103cm

Note: Only use one extension on each side of the gate. If no extensions are required, substitute the Extension Pins with the Adjuster Bolts.

OPENING OR DOORWAY

Screw Adjuster Bolts and Adjuster Screws together and then place them into mounting holes in each corner of the gate.
Place the gate in the opening and ensure the bottom rail is completely flat on the floor and the Wall Cups are directly above each other.
Mark the position of each Wall Cup on the wall and/or stair post.
Stick the Wall Cups in position using the Adhesive Pads and then place the gate into position.
For added security, fix each cup to the wall using a small Phillips head screwdriver (not included) and the Screws provided.
The gate must only be fixed to a solid and secure surface. If unsure, check with a qualified builder or tradesperson to ensure that the installation you intend is suitable and safe within the chosen location.
Align the gate with Wall Cups and tighten Adjuster Screws by turning clockwise, starting with the bottom Adjuster Screws, then tighten the top Adjuster Screws. Tighten equally until there is only a 1.5mm gap in the locking mechanism. Regularly check the tension of all Adjuster Bolts and ensure the gate is secure.
Note: Do not extend Adjuster Bolts more than 57mm.
Note: Do not overtighten.
Allow a 1.5mm gap in the locking mechanism.

OPERATION

HOW TO OPEN GATE

Using one hand, place your thumb on the button and grip Gate Panel with fingers. Slide button across and lift Gate Panel simultaneously.
Open gate in either direction. When released, gate will swing closed automatically.
To enable the stay open feature, open the gate to a 90° angle.

Always check gate is properly closed when in use.

Note: If the gate is open and excessive pressure is applied, (such as standing or swinging on the gate) structural damage may occur.

MAINTENANCE

CARE INSTRUCTIONS

Simply use a soft damp cloth to wipe the gate and dry thoroughly after cleaning. Do not use chemicals or abrasive cleaners.

IMAGES/DRAWINGS IN THE MANUAL ARE FOR VISUAL PURPOSES ONLY. ACTUAL PRODUCT MAY VARY SLIGHTLY. THE MANUFACTURER RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURE WITHOUT PRIOR NOTICE.