elipson Stream S300Xi Network Audio Players User Manual

: August 25, 2024
: elipson

Table of Contents

elipson Stream S300Xi Network Audio Players
Product Usage Instructions
DESCRIPTION
SPECIFICATIONS
GENERAL INFORMATION
FRONT PANEL
REAR PANEL
IN CASE OF BREAKDOWN
2.4G & 5G DÉCLARATION / STATEMENTS
FCC STATEMENT
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

elipson Stream S300Xi Network Audio Players

Specifications :

Streaming Service & network protocols:
- AirPlay 2
- Amazon Music
- Chromecast built-in
- Deezer
- Qobuz
- Spotify
- Spotify Connect
- Tidal
- Web radios
Inputs:
- Bluetooth 5.0
- Aux (mini jack 3.5)
- RJ45
- Wi-Fi
Outputs:
- Optical (mini jack 3.5)
- Aux (mini jack 3.5)
DAC: ESS SABRE ES9023
Signal-to-noise ratio: 106 dB
Wi-Fi network: IEEE 802.11 a/b/g/n/ac 2.4GHz, IEEE 8702.11 a/n/ac 5GHz
Ethernet port: Yes (front and rear panel) switchable
Power supply: 5V 1A – USB C
Dimensions: L78.5 x W83.2 x H15.3 mm
Net weight: 80 g

Product Usage Instructions

Description:
The Elipson Stream S300 Xi is a versatile streaming device that supports various music streaming services and network protocols.

Front Panel :

Led power (ON: white / Standby: red – low consumption)
Bluetooth pairing button
Reset button
Ethernet port (switchable from the back)
Led for network mode (flashing white: in process / solid white: connected)
Led for Bluetooth mode (flashing white: in process / solid white: connected)
Led for AUX input

Rear Panel :

Ethernet port (switchable from the back)
Switch to select front or back ethernet port
Toslink optical mini-jack 3.5 output (digital)
USB-C main plug 5V 1A
Analog mini-jack 3.5 output
Analog mini-jack 3.5 input

Using the Stream S300 Xi:

Wi-Fi Connection:
To connect the Stream S300 Xi to Wi-Fi, access the settings on the device and select the appropriate Wi-Fi network. Enter the password if required.
Resetting Parameters:
If needed, press the reset button on the front panel to reset the device to its factory settings.
In Case of Breakdown:
If you encounter any issues with the device, refer to the troubleshooting section in the user manual or contact Elipson support for assistance.

FAQ :

Q: How do I pair Bluetooth devices with the Elipson Stream S300 Xi?
A: Press the Bluetooth pairing button on the front panel of the device and follow the pairing instructions on your Bluetooth-enabled device.
Q: Can I use the Elipson App with multiple Elipson devices simultaneously?
A: Yes, the Elipson App allows you to connect and control multiple Elipson devices at the same time using your smartphone or tablet.

Dear customer,
Thank you for choosing our Elipson Stream S300 Xi.
Please take the time to read this manual carefully before installing your device.
It contains all the safety and operating instructions that should be followed.
We strongly recommend that you keep both packaging and this user manual for future use.
WARNING
MAKE SURE TO READ THIS INSTRUCTION MANUAL BEFORE TURNING THE POWER ON OR HOOKING UP THIS DEVICE.

DESCRIPTION

Elipson S300 Xi network streamer is a perfect solution for connecting your basic audio setup to your home network. It works with any integrated amplifier, preamplifier or powered speaker by connecting directly to a line or optical Toslink input, taking advantage of the digital-to-analogue conversion of your current device.
Its wireless (Wi-Fi and Bluetooth) and wired (Ethernet) connection options provide instant access to millions of music tracks in high definition.
As part of our Elipson Connect product range, the Stream S300 Xi has Chromecast built-in™ and is compatible with AirPlay 2, so you can stream your favorite music room to room.
Browse and play your audio files from streaming services or your own music library using your WiFi network and your Elipson Multiroom smartphone app. If you don’t have WiFi, you can connect via
Bluetooth or wired
Now it’s your turn to enjoy the Elipson experience.

SPECIFICATIONS

Streaming Service & network protocols|

AirPlay 2 Amazon Music
Chromecast built-in Deezer
Qobuz Spotify
Spotify Connect Tidal
Web radios

---|---
Inputs|

Bluetooth 5.0
Aux (mini jack 3.5) RJ45
Wi-Fi

GENERAL INFORMATION

INSIDE THE BOX :

Stream S300 Xi device
Power cable USB C 5V (1 m)
3.5 mini-jack stereo cable (1.5m)
Optical cable (mini jack 3.5) to toslink (1m)

FRONT PANEL

Led power (ON : white / Stand by : red – low consumption)
Bluetooth pairing button
Reset button
Ethernet port (switchable from the back)
Led for network mode (flashing white : in process / solid white : connected)
Led for Bluetooth mode (flashing white : in process / solid white : connected)
Led for AUX input

REAR PANEL

Ethernet port (switchable from the back)
Switch to select front or back ethernet port
Toslink optical mini-jack 3.5 output (digital)
USB-C main plug 5V 1A
Analog mini-jack 3.5 output
Analog mini-jack 3.5 input

APPLICATION
The Elipson App allows you to connect your product to the network thanks to your smartphone or tablet and to use several devices of our brand simultaneously. The app is compatible with Apple and Android™ devices, available to download from the App Store and on Google Play.

The application will allow you to :

Connect to over 15,000 digital radios
Play music from a streamer (DEEZER, SPOTIFY, TIDAL…)
Select a source on your product
Manage multi-room mode
Knowing what music you’re playing
Manage the sound volume
Simultaneously add and control other Elipson products

To use AirPlay with Stream S300 Xi, the latest version of iOS, iPadOS, or macOS is recommended.

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses.

USING THE STREAM S300 Xi
After connecting the streamer to your amplifier, plug in the power supply.
Depending on your system, you can either use the optical output on an external DAC or connect the analogue output to an amplifier (line or AUX input).
WI-FI CONNECTION :
In order to successfully connect your Elipson Stream S300 Xi to your home network follow the detailed instructions in our Elipson Multiroom application. Do not hesitate to refer to the tutorials on our website if you encounter any difficulties during the process.
RESETTING PARAMETERS :
Press and hold the “RESET” button on the front of the unit until the “Power”, “LAN”, “BT”, “AUX”, LEDs flash simultaneously. Once the restoration is complete, the unit will automatically start the Wi-Fi network connection procedure.

IN CASE OF BREAKDOWN

DO NOT USE ANY KIND OF CLEANING SOLUTION OR CLEANER ON THESE UNITS. IF FOR SOME REASON THE DEVICE NEEDS TO BE REPAIRED, PLEASE CONTACT US IMMEDIATELY.
WE WILL ISSUE A RETURN AUTHORIZATION NUMBER. THIS UNIT SHOULD NOT BE SHIPPED BACK TO ELIPSON WITHOUT THE RA#.
DO NOT ATTEMPT TO OPEN OR DISMANTLE THIS DEVICE.
THIS WILL VOID THE WARRANTY !

POSSIBLE BREAKDOWN :
The product connects and disconnects from the Wi-Fi network.

Check that the broadband of your Wi-Fi network is sufficient.
Check that the device is not too far from the router
Prefer the ethernet connection via an RJ45 cable

No sound on a channel:
Check the connection to the amplifier

2.4G & 5G DÉCLARATION / STATEMENTS

RF Exposure Information: To maintain compliance with FCC RF exposure requirements, use the product that maintain a 20cm separation distance between the user’s body and the host. MPE (Maximum Permissible Exposure) limit for RF exposure at prediction frequency and satisfy RF exposure compliance.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

IC WARNING :
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC/ IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

CE & UKCA STATEMENT:

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with
RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
Do not use the device in the environment at too high or too low temperature, never expose the device under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0°C-40°C.
Operating frequency range and maximum transmit power
- Bluetooth: 2402MHz ~ 2480MHz, <9.11 dBm EIRP
- WLAN 2.4GHz: 2412MHz ~ 2472MHz, <20 dBm EIRP
- WLAN 5GHz: 5150MHz ~ 5825MHz, <20 dBm EIRP
The device for operation in the band 5150~5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
This product can be used across EU member states & UK.
Hereby, Elipson using Linkplay Technology Inc. Corporation, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
APPLE AIRPLAY LEGAL NOTICE:
Use of the Works with Apple AirPlay badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
CREDIT LINES AND TRADEMARK SYMBOLS
Apple, AirPlay, Apple Home, Apple TV, Apple Watch, HomeKit, HomePod, HomePod mini, iPad, iPad Air, iPhone, and tvOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
CREDIT LINES AND TRADEMARK SYMBOLS (JAPAN)
Apple, AirPlay, Apple Home, Apple TV, Apple Watch, HomeKit, HomePod, HomePod mini, iPad, iPad Air, iPhone, and tvOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
CREDIT LINES AND TRADEMARK SYMBOLS (UNITED STATES)
AirPlay®
Apple®
Apple Home™
Apple TV®
Apple Watch®
HomeKit®
HomePod®
HomePod mini®
iPad®
iPad Air®
iPad mini®
iPad Pro®
iPhone®
Lightning®
Mac®
Siri®
GOOGLE LEGAL NOTICE:
Android, Google Play, YouTube and Chromecast built-in are trademarks of Google LLC.

CAUTION

The WEEE symbol indicates this ELIPSON product complies with the European Parliament and Council Directive 2012/19/EU concerning Waste Electrical and Electronic Equipment (WEEE). This product must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.

WARRANTY

These device has a limited 2 year warranty. This warranty includes 2 year parts and repair labor on all components.
The warranty extends only to the original purchaser of the product and not to any subsequent owner.
Elipson’s obligation under these warranties is limited to repairing or replacing any component found defective in material or workmanship under normal conditions of use with an equal and/or current product.
These warranties shall not apply to products which have been abused, modified, or disassembled.
Products to be repaired or returned under this warranty must be returned to the factory through an authorized Elipson dealer with all transportation and insurance charges prepaid.

TO CLAIM REPAIR UNDER WARRANTY

To claim repair or service under warranty you simply have to contact your local Elipson dealer, from whom your equipment has been purchased. To ensure that you will be able to ship your damaged product in correct manner, always retain the original packaging of your Elipson equipment. If you cannot contact your original dealer, or if you are using your Elipson product outside the purchase country, you should contact Elipson national distributor in the residence country, who will advise where the equipment can be serviced.
You can also visit our web site to check our contact information : www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your original purchase invoice specifying the date of purchase and stamped by your dealer.

ELIPSON’S POLICY IS TO CONTINUOUSLY INCORPORATE IMPROVEMENTS INTO OUR PRODUCTS.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
IF YOU HAVE ANY QUESTIONS, PLEASE VISIT OUR WEBSITE :
WWW.ELIPSON.COM
CONTACT US :
CONTACT@ELIPSON.COM OR ON FACEBOOK AND INSTAGRAM
©Elipson 2023 – Elipson is a trademark of AV Industry.
www.elipson.com